B. de La Batut, O. Fergani, V. Brotan, M. Bambach, M. El Mansouri
“Analytical and Numerical Temperature Prediction in Direct Metal Deposition of Ti6Al4V”
Journal of Manufacturing and Materials Processing 2017, Vol. 1, Issue1, 3; doi:10.3390/jmmp1010003

M. Laugwitz, H. Voswinckel, G. Hirt, M. Bambach
"Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging"
International Journal of Material Forming (2017) DOI 10.1007/s12289-017-1356-5, pp 1-7

A. Sviridov, P. Grützner, M. Rusch, M. Bambach
"Joining by upset bulging – Tooling design and new concepts for online process control using servo presses and local heating"
Journal of Machine Engineering, Vol. 17, No. 1 (2017), 78 – 86, ISSN 1895-7595

M. Bambach, A.-S. Häck, M. Herty
"Modeling steel rolling processes by fluid-like differential equations"
Link zu einer externen Seite http://dx.doi.org/10.1016/j.apm.2016.10.056

M. Bambach, I. Sizova, S. Bolz, S. Weiß
„Devising Strain Hardening Models Using Kocks-Mecking Plots  - A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel”
Metals (2016), Vol. 6, Issue 9, DOI 10.3390/met6090204

M. Bambach
"Recent trends in metal forming" From process simulation and microstructure control in classical forming processes to hybrid combinations between forming and additive manufacturing
Journal of Machine Engineering, Vol.16, No. 2(2016)  5 – 17, ISSN 1895-7595

A. Almohallami, M. Rusch, M. Vucetic, A. Bouguecha, M. Bambach, B. A. Behrens
"Joining by Upset Bulging at Elevated Temperatures"
Advanced Materials Research, Vol. 1140, pp. 115-122, 2016, ISSN: 1662-8985

I. Sizova, A. Sviridov, M. Bambach
"Avoiding crack nucleation and propagation during upset bulging of tubes"
International Journal of Material Forming (2016) DOI 10.1007/s12289-016-1292-9

M. Teller, M. Bambach, G. Hirt
„A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium”
CIRP Annals-Manufacturing Technology (2015) 10.1016/j.cirp.2015.04.086

M. Bambach, S. Heppner, D. Steinmetz, F. Roters
„Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity”
Mechanics of Materials  84 (2015) 127-139

M. Bambach, S. Seuren
„On instabilities of force and grain size predictions in the simulation of multi-pass hot rolling processes”
Journal of Materials Processing Technology 216 (2015) 95-113

O. Güvenç, F. Roters, T. Hickel, M. Bambach
„ICME for Crashworthiness of TWIP Steels: From Ab Initio to the Crash Performance”
JOM 67/1 (2015) 120-128

J. Lohmar, M. Bambach, G. Hirt
„Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel”
Procedia Engineering 81 (2014) 268-273

M. Bambach, H. Voswinckel, G. Hirt
„A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming”
Procedia Engineering 81 (2014) 2305-2310

D. Bailly, M. Bambach, G. Hirt, T. Pofahl, R. Herkrath, H. Heyden, M. Trautz
„Manufacturing of Innovative Self-supporting Sheet-metal Structures Representing Freeform Surfaces”
Procedia CIRP 18 (2014) 51-56

M. Daamen, O. Güvenc, M. Bambach, G. Hirt
„Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts”
CIRP Annals – Manufacturing Technology 63/1 (2014) 265-268

S. Stille, J. Pöplau, T. Beck, M. Bambach, G. Hirt, L. Singheiser
„Very high cycle fatigue behavior of riblet structured Alclad 2024 thin sheets”
International Journal of Fatigue 63 (2014) 183-190

M. Bambach, M. Pietryga, A. Mikloweit, G. Hirt
„A finite element framework for the evolution of bond strength in joining-by-forming processes”
Journal of Materials Processing Technology 214/10 (2014) 2156-2168

M. Bambach, H.M. Bücker, S. Heppner, M. Herty, I. Vladimirov
„Characteristics of testing conditions for constitutive models in metal plasticity”
Journal of Engineering Mathematics 88/1 (2014) 99-119

J. Lohmar, M. Bambach, G. Hirt, T. Kiefer, D. Kotliba
„The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques”
Steel Research International 85/11 (2014) 1525-1532

O. Güvenç, M. Bambach, G. Hirt
„Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working”
Steel Research International 85/6 (2014) 999 -1009

G. Laschet, M. Shukla, T. Henke, P. Fayek, M. Bambach, U. Prahl
„Impact of the Microstructure on the U‐O Forming Simulations of a Ferrite‐Pearlite Pipeline Tube”
Steel Research International 85/6 (2014) 1083-1098

H. Voswinckel, M. Bambach, G. Hirt
„Improving geometrical accuracy for flanging by incremental sheet metal forming”
International Journal of Material Forming (2014) 1-9

C. Mertin, A. Naumov, L. Mosecker, M. Bambach, G. Hirt
„Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum”
Key Engineering Materials 611 (2014) 1429-1436

M. Bambach
„Re-Meshing in Finite Element Simulations of Hot Working Including a Microstructural Evolution Model”
Key Engineering Materials 611 (2014) 505-512

T Henke, G Hirt, M. Bambach
„Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model”
Advanced Materials Research 922 (2014) 254-259

M. Bambach, M.P. Pietryga, A. Mikloweit, G. Hirt, K. Karhausen
„Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength”
Materials Science Forum 783 (2014) 644-650

C. Russig, M. Bambach, G. Hirt, N. Holtmann
„Shot Peen Forming of Fiber Metal Laminates on the example of GLARE®”
International Journal of Material Forming 7/4 (2014) 425-438

M. Bambach
„Implications from the Poliak–Jonas criterion for the construction of flow stress models incorporating dynamic recrystallization”
ActaMaterialia 61/16 (2013) 6222–6233

A. Göttmann, C. Mertin, L. Mosecker, A. Naumov, M. Bambach
„Properties of Friction Stir Welded Blanks Made from DC04 Mild Steel and Aluminum AA6016”
Advanced Materials Research 769 (2013) 237–244

T. Henke, M. Bambach, G. Hirt
„Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging”
CIRP Annals - Manufacturing Technology 62/1 (2013) 287–290

I. Vladimirov, M. Bambach, M. Herty, M.H. Bücker
„Identification of optimal material models and parameters in finite strain plasticity”
PAMM 13/1 (2013) 335–336

M. Bambach, R. Grzibovskis
„Analysis of optimal metal flow in incremental sheet forming”
PAMM 13/1 (2013) 331–332

M. Bambach
„Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes”
Materials Science Forum 762 (2013) 325-330

J. Lohmar, M. Bambach
„Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation”
Materials Science Forum 762 (2013) 331-336

T. Henke, G. Hirt, M. Bambach
„Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process”
Materials Science Forum 762 (2013) 354-359

H. Voswinckel, M. Bambach, G. Hirt
„Process Limits of Stretch and Shrink Flanging by Incremental Sheet Metal Forming”
Key Engineering Materials 549 (2013) 45-52

C. Russig, M. Bambach, G. Hirt
„Experimental Investigations of Different Tool Concepts for Rotary Peen Forming”
Key Engineering Materials 549 (2013) 53-60

L. Mosecker, A. Göttmann, A. Saeed-Akbari, W. Bleck, M. Bambach, G. Hirt
„Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating”
Key Engineering Materials  549 (2013) 372-380

T. Henke, M. Bambach, G. Hirt
„Die and process design for hot forging of a gear wheel – a case study”
Key Engineering Materials 554 (2013) 307-316

M. Bambach, M. Heinkenschloss, M. Herty
„A Method for Model Identification and Parameter Estimation”
Inverse Problems  29/2 (2013) 025009

O. Güvenc, T. Henke, G. Laschet, B. Böttger, M. Apel, M. Bambach, G. Hirt
„Modeling of Static Recrystallization Kinetics by Coupling Crystal Plasticity FEM and Multiphase Field Calculations”
Computer Methods in Material Science 13/1-3 (2013) 368–374

A. Göttmann, D. Bailly, G. Bergweiler, M. Bambach, J. Stollenwerk, G. Hirt, P. Loosen
„A novel approach for temperature control in ISF supported by laser and resistance heating”
The International Journal of Advanced Manufacturing Technology 67/9-12 (2013) 2195-2205

J. Lohmar, M. Bambach, K.F. Karhausen
„Influence of Microstructure Representation on Flow Stress and Grain Size Prediction in Through-Process Modeling of AA5182 Sheet Production"
JOM Journal of the Minerals, Metals and Materials Society 65/1 (2013) 93-98

B. Viehweger, T. Schölzke, M. Schierz
"Drücken strukturierter Feinbleche"
Bänder Bleche Rohre, 54. Jahrgang (2013), Heft 6, Seite 122 -123

B. Viehweger, A. Sviridov, B.-A. Behrend, M. Kammler, P. Grützner
"Ein Fügeverfahren mit Perspektive"
Blech/Bänder/Rohre, 54. Jahrgang (2013), Heft 2, Seite 76 – 77

H. Deli, T. Reichardt, A. Demant, M. Bambach, M. Diaco, A. Lüling, G. Köhler
„Nanoskalierte Schmiermitteladditive ermöglichen Leistungssteigerung beim Gesenkschmieden”
Stahl und Eisen 132/7 (2012) 55

C. Russig, M. Bambach, G. Hirt
„A New Tool Concept for Rotary Peen Forming with Defined Impact Positions"
Key Engineering Materials 504 (2012) 925-930

S. Olbrich, B. Viehweger, T. Schölzke
"Prozesssichere Herstellung von FQZ-Wabenstrukturen durch Hydroforming"
Bänder Bleche Rohre, 53. Jahrgang (2012), Heft 7, Seite 66 – 67

B. Taleb-Araghi, M. Bambach, G. Hirt, J. Zettler
„Investigations into the Process Mechanics of the Hybrid Process Combination of Stretch Forming and Incremental Sheet Forming”
Steel Research International, Special Edition: 10th Int. Conf. on Technology of Plasticity, (2011) 519-524

G.J. Schmitz, Benke, G. Laschet, M. Apel, U. Prahl, P. Fayek, Konovalov, J. Rudnizki, H. Quade, S. Freyberger, T. Henke, M. Bambach, E.A. Rossiter, U. Jansen, U. Eppelt
„Towards Integrative Computational Materials Engineering of Steel Components”
Production Engineering 5/4 (2011) 373-382

B. Taleb-Araghi, A. Göttmann, M. Bambach, G. Hirt, G. Bergweiler, J. Dittrich, M. Steiners, A. Saeed-Akbari
„Review on the development of a hybrid incremental sheet forming system for a small batch sizes and individualized production”
Production Engineering 5/4 (2011) 393-404

G. Schuh, S. Aghassi, S. Orilski, J. Schubert, M. Bambach, R. Freudenberg, C. Hinke, M. Schiffer
„Technology roadmapping for the production in high-wage countries”
Production Engineering 5/4 (2011) 463-473

A. Göttmann, J. Diettrich, G. Bergweiler, M. Bambach, G. Hirt, P. Loosen, R. Poprawe
„Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts”
Production Engineering  5/3 (2011) 263-271

H. Voswinckel, H. Schleifenbaum, M. Bambach, G. Hirt
„Design for manufacture based on an integrated product process design model”
Key Engineering Materials 473 (2011) 799-806

B. Taleb-Araghi, A. Göttmann, G. Bergweiler, A. Saeed-Akbari, J. Bültmann, J. Zettler, M. Bambach, G. Hirt
„Investigation on Incremental Sheet Forming combined with Laser Heating and Stretch forming for the production of lightweight structures”
Key Engineering Materials 473 (2011) 919-928

M. Bambach
„Comparision of the Identifiability of Flow Curves from the Hydraulic Bulge Test by Membrane Theory and Inverse Analysis”
Key Engineering Materials 473 (2011) 360-367

W. Xiong, B. Wietbrock, A. Saeed-Akbari, M. Bambach, G. Hirt
„Modeling the Flow Behaviour of a High-Manganese Steel Fe-Mn23-C0.6 in Consideration of Dynamic Recrystallization”
Steel Research International, 82.2 (2011) 127-136

B. Wietbrock, W. Xiong, M. Bambach, G. Hirt
„Effect of temperature, strain rate, manganese and carbon content on flow behavior of three ternary Fe-Mn-C (Fe-Mn23-C0.3, Fe-Mn23-C0.6, Fe-Mn28-C0.3) high-manganese steels”
Steel Research International 82/1 (2011) 63-69

J. Vogel, J. Keller, A. Sviridov, H.-J.Feige, K. Kreyssig, J. Auersperg, P. Plass and H. Walter
"Characterisation of Strength Behaviour of Aluminium Foam Sandwiches Under Static Load"
In: Strain, Volume 47, Issue Supplement s1, S. e234-e242, Blackwell Publishing Ltd.

M. Bambach
„A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness”
Journal of Materials Processing Technology 210/12 (2010) 1562-1573

X. Gu, M. Franzke, M. Bambach, G. Hirt
„Experimental and numerical investigation of grid sheet bending behavior in four-roll bending”
CIRP Annals - Manufacturing Technology 59/1 (2010) 303-306

C. Heering, X. Li, M. Bambach, G. Hirt
„Physical and numerical simulation of cold rolling of an AlFeSi alloy in consideration of static recovery”
Advanced Engineering Materials 12/3 (2010) 141-146

B. Wietbrock, M. Bambach, S. Seuren, G. Hirt
„Homogenization strategy and material characterization of high-manganese TRIP and TWIP steels”
Materials Science Forum 638 (2010) 3134-3139

M. Bambach, M. Al-Baouni, N. Kilpatrick, S. Soto, M. Kretschmer, G. Hirt
„Numerical analysis of stake mark induced failure of a rotor shaft”
Steel Research International 81/1 (2010) 74-84

M. Bambach, B. TalebAraghi, G. Hirt
„Strategies to improve the geometric accuracy in asymmetric single point incremental forming”
Production Engineering 3/2 (2009) 145-156

B. TalebAraghi, G.L. Manco, M. Bambach, G. Hirt
„Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming”
CIRP Annals - Manufacturing Technology 58/1 (2009) 225-228

B. TalebAraghi, M. Bambach, G. Hirt
„Comparison of some final part geometrical characteristics of cylindrical cups manufactured by deep-drawing and two-point incremental sheet forming”
Key Engineering Materials 410 (2009) 355-363

R. Grzhibovskis, M. Bambach, S. Rjasanow, G. Hirt
„Adaptive cross-approximation for surface reconstruction using radial basis functions”
Journal of Engineering Mathematics 62/2 (2008) 149-160

B. Viehweger, A. Sviridov
"Frontmodule für Schienenfahrzeuge aus Aluminiumschaumsandwich-Fertigungstechnologien zur Bauteilherstellung"
Forum der Forschung 20/2007: S. 69 - 72, BTU Cottbus, Eigenverlag, ISSN-Nr. 0947-6989

B. Viehweger, A. Sviridov
"Wie mit neunen Fertigungslösungen Bauteile aus Aluminiumschaumsandwiches entstehen"
MM Das IndustieMagazin 48/2007 S. 24 - 27

M. Bambach, G. Barton, M. Franzke, G. Hirt
„Modelling of incremental bulk and sheet metal forming”
Steel Research International 78/10-11 (2007) 751-755

M. Bambach, M. Todorova, G. Hirt
„Experimental and numerical analysis of forming limits in CNC incremental sheet forming”
Key Engineering Materials 344 (2007) 511-518

E. Maidagan, J. Zettler, M. Bambach, P. Rodríguez, G. Hirt
„A new incremental sheet forming process based on a flexible supporting die system”
Key Engineering Materials 344 (2007) 607-614

B. Viehweger, G. Richter, A. Sviridov, H.-J. Hartmann, J. Rauer
"Entwicklung von Technologien für die wirkmedienbasierte Warmumformung von Blechen aus Magnesiumlegierungen"
Abschlussbericht zum DFG-Schwerpunktprogramm SPP 1098, 2000 - 2006, Shaker Verlag 2006, S. 153 - 170; Hrsg. Matthias Kleiner; ISBN 3-8322-5457-9

G. Hirt, J. Ames, M. Bambach
„Validation of FEA for asymmetric incremental sheet forming by on-line measurements of deformation and tool forces”
Production Engineering Research and Development 13/2-3 (2006) 39-44

B. Viehweger, A. Karabet, A. Sviridov, M. Düring
"Hydroforming of Magnesium Sheet Metal"
Advanced Technology of Plasticity 2005; Proceedings of the 8th International Conference on Technology of Plasticity Verona, October 9-13, 2005;
Edited by P. F. Bariani; ISBN 88-87331-74-X

M. Bambach, G. Hirt, J. Ames
„Quantitative validation of FEM simulation for incremental sheet forming using optical deformation measurement”
Advanced Materials Research 6 (2005) 509-511

B. Viehweger, G. Richter, M. Düring, A. Karabet, A. Sviridov, A. Hartmann, U. Richter
"Hydromechanisches Tiefziehen und Hochdruckumformung als Verfahren zur Herstellung komplexer Bauteile aus Magnesiumfeinblechen des Typs AZ31B-0"
Materialwissenschaft und Werkstofftechnik, Vol.35, No. 7, S 440 - 446 Wiley-vch Verlag GmbH & Co. KGaA, Weinheim, ISSN 0933-5137

G. Hirt, J. Ames, M. Bambach, R. Kopp
„Forming strategies and process modelling for CNC incremental sheet forming"
CIRP Annals - Manufacturing Technology 53/1 (2004) 203-206

B. Viehweger, A. Karabet, A. Sviridov, H. Hartmann, J. Rauer
"Wirkmedienbasierte Umformung von Magnesiumblechen am Beispiel von praxisnahen Referenzteilen
3. Kolloquium „Wirkmedienbasierte Blechumformung“ im Rahmen des DFG-Schwerpunktprogramms SPP-1098, Universität Dortmund, 2003, ISBN 3-9809535-0-5

B. Viehweger, A. Sviridov
"Wirkmedienbasierte Warmumformung von Magnesiumblechen"
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 98 (2003) 10, 0932-0482

G. Hirt, M. Bambach, I. Chouvalova, S. Junk
„Process Limits and material behaviour in incremental sheet forming with CNC-tools”
Materials Science Forum 426 (2003) 3825-3830