Veröffentlichungen und Vorträge 2026 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 bis 2000 Yang, J., Beirow, B., Giersch, T., ElMasry, S., Becker, B. Numerical Investigation of Forced Response in a 1.5-Stage Transonic Compressor With Tandem Stator Proceedings of the ASME Turbo Expo 2026, Milan, June 15–19, 2026, Paper-No. GT2026-174536 Mathiazhagen, A., Gopalkrishnan, V., Beirow, B., Asli, M., Höschler, K. Modal analysis of 3D-printed PA12 TPMS lattices incorporating sigmoid transition zones Journal: ScienceDirect, Composites Part C: Open Access, Volume 20, Artikel 100765 https://doi.org/10.1016/j.jcomc.2026.100765 Naveed, Z., Beirow, B., Singh, K. Application of Isogeometric Analysis in Aero-Engine Modeling and Dynamic Simulations Proceedings of The Thirteenth International Conference on Isogeometric Analysis (IGA 2025), 14–17 September 2025, Eindhoven, Niederlande Langheinrich, D., Kopča, J., Heinrich, C.R., Beirow, B. Advanced multi degree of freedom fitting tool for the assessment of frequency response functions under varying ambient pressure conditions Proceedings of Vibrations in Rotating Machinery - VIRM 13, London, Sept. 16-18, 2025 Beirow, B., Nakos, A., Stecklina, C., Noack, M., Firl, M., Sasakoras, M. Implementation of Intentional Mistuning by Means of Finite Element Based Shape Optimization Journal of Engineering for Gas Turbines and Power. July 29, 2025, doi Nakos, A., Beirow, B. Comparative Experimental Determination of Mistuning of a Bladed Turbine Wheel Using Different Evaluation Approaches Journal of Engineering for Gas Turbines and Power. July 28, 2025, doi Sasakaros, M., Becker, J., Wirsum, M., Beirow, B. On the Determination of Nodal Diameter Spectrum and Mistuning Quantification of Synchronous Blade Vibrations Through Blade-Tip-Timing Measurements Journal of Engineering for Gas Turbines and Power. July 26, 2025, doi Beirow, B., Nakos, A., Stecklina, C., Noack, M., Firl, M., Sasakoras, M. Implementation of Intentional Mistuning by Means of Finite Element Based Shape Optimization Proceedings of the ASME Turbo Expo 2025, Memphis, June 16–20, 2025, Paper-No. GT2025-151617 Sasakaros, M., Becker, J., Wirsum, M., Beirow, B. On the Determination of Nodal Diameter Spectrum and Mistuning Quantification of Synchronous Blade Vibrations Through Blade-Tip-Timing Measurements Proceedings of the ASME Turbo Expo 2025, Memphis, June 16–20, 2025, Paper-No. GT2025-151774 Nakos, A., Beirow, B. Comparative Experimental Determination of Mistuning of a Bladed Turbine Wheel Using Different Evaluation Approaches Proceedings of the ASME Turbo Expo 2025, Memphis, June 16–20, 2025, Paper-No. GT2025-151778 Beirow, B., Nakos, A., Golze, M., Vogt, D., Wirsum, M., Schafferus, M., Sasakaros, M. Forced Response Reduction of a Turbine Impeller Conference Paper International Conference on the Theory of Machines and Mechanisms, Liberec, Czech Republic, September 3–5, 2024, in: Advances in Mechanism Design IV, Springer Nature Switzerland, doi: https://doi.org/10.1007/978-3-031-70251-8_6 Sasakaros, M.; Schafferus, M.; Wirsum, M.; Zobel, A.; Vogt, D.; Nakos, A.; Beirow, B. Experimental Investigation of Synchronous-Flow-Induced Blade Vibrations on a Radial Turbine International Journal of Turbomachinery, Propulsion and Power 2024, 9, 35. https://doi.org/10.3390/ijtpp9040035 Langheinrich, D., Beirow, B., ElMasry, S. Validation of a Numerical Model Based on an Optical Surface Scan and Experimental Modal Analyses Under Vacuum Conditions Proceedings of the ASME Turbo Expo 2024, London, June 24–28, 2024. doi: https://doi.org/10.1115/GT2024-128070 Gambitta, M., Beirow, B., & Klauke, T. Structural Dynamics of an Axial Compressor’s Rear Blisk Drum and Multi-Stage Coupling Proceedings of the ASME Turbo Expo 2024, London, June 24–28, 2024. doi: https://doi.org/10.1115/GT2024-128647 Naveed, Z., Beirow, B., Singh, K. Advancing Aero-engine Simulations through Isogeometric Analysis The 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) Congress, 3 – 7 June 2024, Lisbon, Portugal Abstract: https://eccomas2024.org/event/contribution/5ba8244f-955d-11ee-8178-000c29ddfc0c Naveed, Z. Advancements in Isogeometric Analysis for Aero-Engine Applications Mechanical & Design Excellence Doctoral conference, 23-24 April 2024, Derby, UK Gambitta, M., Beirow, B., Schrape, S. Modelling Method for Aeroelastic Low Engine Order Excitation Originating from Upstream Vanes’ Geometrical Variability International Journal of Turbomachinery Propulsion and Power 2024, 9, https://doi.org/10.3390/ijtpp9020012 Gambitta, M., Beirow, B., and Klauke, T. Investigation of Rear Blisk Drum Dynamics Under Consideration of Multi-Stage Coupling. ASME. Journal of Engineering for Gas Turbines and Power, February 2024, 146(2), 021017 https://doi.org/10.1115/1.4063633 Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2023 (2. Platz) Nakos, A., Beirow, B., On the Influence of Installation on the Forced Response of Radial Turbine Wheels Proceedings of Global Power and Propulsion Society, GPPS Hongkong, October 16 - 19, 2023, DOI : 10.33737/gpps23-tc-138 Nakos, A., Schafferus, M., Sasakaros, M., Zobel, A., Beirow, B., Wirsum, M., Vogt, D. Intentional Mistuning Abschlussbericht FVV-Vorhaben Nr. 1389, 2023, FVV-Abschlussbericht H606 Yang, J., Beirow, B., Giersch, T., Becker, B. The Effect of Intentional Mistuning on a High Pressure Compressor Blisk Rotor Proceedings of Global Power and Propulsion Society, GPPS Hongkong , October 16 - 19, 2023 Gambitta, M., Beirow, B., Klauke, T. Investigation of Rear Blisk Drum Dynamics under Consideration of Multi-Stage Coupling Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-103756, Boston, Massachusetts, June 26-30, 2023 doi.org/10.1115/GT2023-103756 Nakos, A., Beirow, B., Wirsum, M., Schafferus, M., Sasakaros, M., Vogt, D., Zobel, A. Mistuning and Damping of a Radial Turbine Wheel. Part 3: Validation of Intentional Mistuning During Machine Operation Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-101993, Boston, Massachusetts, June 26-30, 2023 doi: 10.1115/GT2023-101993 Zobel, A., Fuhrer, C., Vogt, D., Nakos, A., Beirow, B., Blessing, A., Zippack, C. On the Influence of Bearing Modeling Details on the Dynamical System Effects of a Mid-Size Turbocharger Rotor Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-102098, Boston, Massachusetts, June 26-30, 2023 https://doi.org/10.1115/GT2023-102098 Schafferus, M., Sasakaros, M., Wirsum, M., Zobel, A., Vogt, D., Nakos, A., Beirow, B. Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 1: Nominal Inlet Guide Vane Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-103037, Boston, Massachusetts, June 26-30, 2023 https://doi.org/10.1115/GT2023-103037 Sasakaros, M., Schafferus, M., Wirsum, M., Zobel, A., Vogt, D., Nakos, A., Beirow, B. Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 2: Influence of Different Inlet Guide Vane Configurations Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-102243, Boston, Massachusetts, June 26-30, 2023 https://doi.org/10.1115/GT2023-102243 Kober, M., Beirow, B., Meyer, M., Singh, K. Towards the Isogeometric Aero-Engine Journalveröffentlichung, referiert, Results in Engineering Volume 18 (June 2023), ELSEVIER, doi.org/10.1016 Kober, M., Beirow, B., Singh, K. Towards the Isogeometric Aero-Engine Proceedings of 16th German LS-DYNA Forum, 11.-12. Oktober 2022, Bamberg, ISBN 978-3-9816215-8-7 ElMasry, S., Beirow, B., Figaschewsky, F., Giersch, Th. Aeromechanical optimization of an axial compressor stage 25th ISABE Conference, 25–30 September 2022, Ottawa, Canada, Paper-Nr. ISABE_2022_275 Gambitta, M., Beirow, B., Schrape, S. Modeling Method for Aeroelastic Low Engine Order Excitation Originating from Upstream Vanes’ Geometrical Variability Proceedings of ISUAAAT16, Paper ISUAAAT16-070, Toledo/Spain, 19th -23rd September 2022 Nakos, A., Beirow, B., Zobel, A. Vibration Analyses of Radial Turbine Wheels Considering Structural and Aerodynamic Mistuning Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania22, September 12 - 14, 2022 Gambitta, M., Beirow, B., Schrape, S. A Digital Twin of Compressor Blisk Manufacturing Geometrical Variability for the Aeroelastic Uncertainty Quantification of the Aerodynamic Damping Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82935, Rotterdam,The Netherlands, June 12-17, 2022 Yang, J., Beirow, B., Giersch, T. Simulation and Investigation of an Intentionally Mistuned Blisk Rotor in an High Pressure Compressor Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82576, Rotterdam,The Netherlands, June 12-17, 2022 Beirow, B., Golze, M., Popig, F. Application of Intentional Mistuning to Reduce the Vibration Susceptibility of a Steam Turbine Wheel Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82208, Rotterdam,The Netherlands, June 12-17, 2022 Nakos, A., Beirow, B., Zobel, A. Mistuning and Damping of a Radial Turbine Wheel. Part 2: Implementation And Validation of Intentional Mistuning Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-80643, Rotterdam,The Netherlands, June 12-17, 2022 Heinrich, C. R., Unglaube, T., Beirow, B., Brillert, D., Steff, K., and Petry, N. Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems ASME, Journal of Engineering for Gas Turbines and Power, May 17, 2022 doi: https://doi.org/10.1115/1.4054567 Nakos, A., Schafferus, M., Sasakaros, M., Zobel, A. Intentional Mistuning zur Begrenzung erzwungener Schwingungsantworten von Radialturbinen Zwischenbericht über das Vorhaben Nr. 1389 (AiF-Nr. 20992 BG), Frühjahrstagung 2022, Würzburg, 31. März - 1. April 2022, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R602 - 2022, S.523-558 Gambitta, M., Kühhorn, A., Beirow, B., Schrape, S. Stator Blades Manufacturing Geometrical Variability in Axial Compressors and Impact on the Aeroelastic Excitation Forces Journal of Turbomachinery, Volume 144 (4), April 2022 Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2021 (2. Platz) DOI: https://doi.org/10.1115/1.4052602 Nakos, A., Beirow, B. Zobel, A. Mistuning and Damping of a Radial Turbine Wheel. Part 1: Fundamental Analyses and Design of Intentional Mistuning Pattern Journal of Engineering for Gas Turbines and Power, Feb. 2022, Volume 144, Issue 2 DOI: https://doi.org/10.1115/1.4052201 Beirow, B., Golze, M., Popig, F. Vibration Reduction of a Steam Turbine Wheel by Means of Intentional Mistuning Chapter in: Advances in Mechanism Design III, 2022, Springer International Publishing doi: https://doi.org/10.1007/978-3-030-83594-1 Abstract Beirow, B., Golze, M., Popig, F. Vibration Reduction of a Steam Turbine Wheel by Means of Intentional Mistuning XIII. International Conference on the Theory of Machines and Mechanisms, 2021, 7.-9. Spt., Technical University of Liberec Abstact Noack, M., Kühhorn, A., Kober, M., Firl, M. A new stress-based topology optimization approach for finding flexible structures Structural and Multidisciplinary Optimization, Vol. 64 (2021) Link Naveed, Z., Kühhorn, A., Kober, M. An Isogeometric Based Study of Contact Behaviour for Rotating Structures 14th World Congress on Computational Mechanics (WCCM)-ECCOMAS Congress 2020 Virtual Conference: 11-15 January 2021 Link Heinrich, C.R., Unglaube, T., Beirow, B., Brillert, D., Steff, K., Petry, N. Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-58835, Virtual Conference, Online, June 7-11, 2021 Abstract Gambitta, M., Kühhorn, A., Beirow, B., Schrape, S. Stator Blades Manufacturing Geometrical Variability in Axial Compressors and Impact on the Aeroelastic Excitation Forces Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-59642, Virtual Conference, Online, June 7-11, 2021 Abstract Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2021 (2. Platz) Nakos, A., Beirow, B., Zobel, A. Mistuning and Damping of a Radial Turbine Wheel. Part 1: Fundamental Analyses and Design of Intentional Mistuning Pattern Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-59283, Virtual Conference, Online, June 7-11, 2021 Abstract Beirow, B., Kühhorn, A., Weber, R., Popig, F. Vibration Analyses of an Axial Turbine Wheel with Intentional Mistuning Journal of Engineering for Gas Turbines and Power, 24. Dez. 2020 doi.org/10.1115/1.4049449 Heinrich, C.R., Kühhorn, A., Steff, K., Petry, N. Generalized Model for the Approximation of Coupled Acousto-Mechanical Natural Frequencies in High-Pressure Centrifugal Compressors Journal of Engineering for Gas Turbines and Power, 24. Dez. 2020 doi.org/10.1115/1.4049447 Beirow, B., Kühhorn, A., Weber, R., Popig, F. Vibration Analyses of an Axial Turbine Wheel With Intentional Mistuning ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14468, Virtual Conference, Online, September 21 – 25, 2020 Hardenberg, A., Kühhorn, A., Fanter, M. Correlating and Updating Finite Element Models of Different Fidelity Using an Energy-Based Approach ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14509, Virtual Conference, Online, September 21 – 25, 2020 ElMasry, S., Kühhorn, A., Figaschewsky, F. Investigation of Working Line Variation Onto Forced Response Vibrations of a Compressor Blisk ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-15145, Virtual Conference, Online, September 21 – 25, 2020 Heinrich, C.R., Kühhorn, A., Steff, K. Generalized Model for the Approximation of Coupled Acousto-Mechanical Natural Frequencies in High-Pressure Centrifugal Compressors ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-15281, Virtual Conference, Online, September 21 – 25, 2020 Gambitta, M., Kühhorn, A., Schrape, S. Geometrical Variability Modelling of Axial Compressor Blisk Aerofoils and Evaluation of Impact on the Forced Response Problem ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-16168, Virtual Conference, Online, September 21 – 25, 2020 Franz, F., Kühhorn, A., Giersch, T., Schrape, S., Figaschewsky, F. Influence of Inlet Distortions on the Forced Vibration of a High Pressure Compressor Rig ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-16221, Virtual Conference, Online, September 21 – 25, 2020 Weber, R., Kühhorn, A., Klauke, T., Schrape, S. The Effect of Sand Erosion on a Compressor Blade and its Modal Properties ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14045, Virtual Conference, Online, September 21 – 25, 2020 Hardenberg, A., Kühhorn, A., Fanter, M., Bewertung der Auswirkungen von Strukturmodifikationen und Modellvereinfachungen unter Einsatz der FEA-FEA Korrelation auf das Modalverhalten einer Triebwerksgehäusestruktur VDI-Berichte 2366, VDI-Verlag Düsseldorf, 2019. ISBN 978-3-18-092366-6 Naveed, Z., Kühhorn, A., Kober, M. Contact Behaviour of Isogeometric Analysis for Rotating Structures and its Industrial Application by Coupling to the Classical Finite Element Method VII International Conference on Isogeometric Analysis, München, 18.-20. September 2019 Weber, R., Kühhorn, A., Beirow, B. Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder MTZ Motortechnische Zeitschrift 2019 80. Jahrgang 9. Ausgabe: S.74-78 DOI: https://doi.org/10.1007/s35146-019-0094-2 Weber, R., Kühhorn, A., Beirow, B. Mistuning and Damping of Turbine and Compressor Impellers MTZ worldwide 2019 Volume 80, Issue 9, pp 72-77 DOI: https://doi.org/10.1007/s38313-019-0090-4 Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A.: Vibration analysis of a mistuned axial turbine blisk Proceedings of ASME Turbo Expo 2019, GT2019-92047, June 15-21, 2019, Phoenix, AZ, USA Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S., Nipkau, J., An inverse approach to identify tuned aerodynamic damping, system frequencies and mistuning – Part 3: Application to engine data Proceedings of ASME Turbo Expo 2019, GT2019-91337, June 15-21, 2019, Phoenix, AZ, USA DOI: https://doi.org/10.1115/GT2019-91337 Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2019 (1. Platz) Maywald, T., Heinrich, C. R., Kühhorn, A.,Schrape, S., Backhaus, T. Prediction of geometrically induced localization effects using a subset of nominal system modes Proceedings of ASME Turbo Expo 2019, GT2019-90884, June 15-21, 2019, Phoenix, AZ, USA Zishan Naveed, Arnold Kühhorn, Markus Kober Comparative Evaluation of Isogeometric Analysis and Classical FEM with Regard to Contact Anaylsis 12th European LS-DYNA Conference 2019, 14 -16 May 2019, Koblenz, Germany https://www.dynalook.com/conferences/12th-european-ls-dyna-conference-2019/isogeometric/naveed_btu.pdf Weber, R., Kühhorn, A. Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder Abschlussbericht, Frühjahrstagung 2019, Würzburg, 28.-29. März 2019, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R588-2019, S.75-109 Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S. Analysis of mistuned forced response in an axial high-pressure compressor rig with focus on Tyler–Sofrin modes The Aeronautical Journal, 123(1261), 356-377 https://doi.org/10.1017/aer.2018.163 Beirow, B., Kühhorn, A., Figaschewsky, F., Hönisch, P., Giersch, T., & Schrape, S. (2019). Model update and validation of a mistuned high-pressure compressor blisk The Aeronautical Journal, 123(1260), 230-247 https://doi.org/10.1017/aer.2018.149 Henke, A.-S.; Noack, M.; Geyer, T.F.; Heinrich, C.R.; Beirow, B.; Sarradj, E.; Kühhorn, A. Calculation of the Modal Behavior of Structured Sheet Metal International Journal of Lightweight Materials and Manufacture, Febr. 2019 doi.org/10.1016/j.ijlmm.2019.01.004 Weber, R., Kühhorn, A. Mistuning Identification Approach With Focus on High-Speed Centrifugal Compressors Journal of Engineering for Gas Turbines and Power 141(3), 032507 (März 2019), GTP-18-1286 www.doi.org/10.1115/1.4040999 Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A. Vibration Analysis of an Axial Turbine Blisk with Optimized Intentional Mistuning Pattern Journal of Sound and Vibration, Volume 442, 3 March 2019, Pages 11-27. https://doi.org/10.1016/j.jsv.2018.10.064 Benjamin Hanschke, Arnold Kühhorn, Sven Schrape, Thomas Giersch Consequences of Borescope Blending Repairs on Modern HPC Blisk Aeroelasticity January 2019, Journal of Turbomachinery 141(2), DOI: 10.1115/1.4041672 Kober, M., Kühhorn, A., Keskin, A. Instabilitätsprobleme bei der impliziten transienten FEM-Simulation schnell rotierender elastischer Strukturen – Beschreibung des Phänomens und Lösungsmöglichkeiten NAFEMS-Online-Magazin, Heft 48, S. 36-49, 2018, ISSN 2311-522X Figaschewsky, F., Hanschke, B., Kühhorn, A. Efficient Generation of Engine Representative Tip Timing Data Based on a Reduced Order Model for Bladed Rotors Journal of Engineering for Gas Turbines and Power 141(1), 012503 (Nov 14,2018), GTP-18-1339 doi: 10.1115/1.4040748 Kober, M., Kühhorn, A., Keskin, A. Optimization of Newmark-Euler Time-Integration Parameters for a Stable and Efficient Implicit Simulation of Rotating Elastic Structures Proceedings of 15th German LS-DYNA Forum, 15.-17. Oktober 2018, Bamberg, ISBN 978-3-9816215-5-6 Weber, R., Kühhorn, A., Heinrich, C.R. Modelling and analysis of a high-speed turbine impeller concerning mistuning The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV), 10-13 September 2018, Lissabon, Portugal doi: 10.1051/matecconf/201821118002 Figaschewsky, F., Kühhorn, A. An Inverse Approach to Identify Tuned Aerodynamic Damping, System Frequencies, and Mistuning. Part 1: Theory Under Rotating Conditions Paper ISUAAAT15-048, Proceedings of ISUAAAT15, Oxford, UK, 24-27th September 2018 >>Download (pdf) Beirow, B., Kühhorn, A., Figaschewsky, F. An Inverse Approach to Identify Tuned Aerodynamic Damping, System Frequencies, and Mistuning. Part 2: Application to Blisks at Rest Paper ISUAAAT15-021, Proceedings of ISUAAAT15, Oxford, UK, 24-27th September 2018 >>Download (pdf) Koch, I., Beirow, B., Filippatos, A., Kühhorn, A., and Gude, M.: Methodical Approach for Simulation the Vibration of Damaged Fibre Reinforced Composite Rotors Under Consideration of Aerodynamic Influences ECCM 18 – 18th European Conference on Composite Materials, Athens, Greece, 25 – 28th June 2018 Kober, M., Kühhorn, A., Keskin, A. Instability Problems of Implicit FEM Solution Procedures for Fast Rotating Structures – Instability Sources and Solutions WCCMXIII and PANACM II (World Congress on Computational Mechanics & Pan American Congress on Computational Mechanics), 22.-27. Juli 2018, New York, USA >> Download (pdf) Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A., Repetckii, O. Forced Response Reduction of a Blisk by Means of Intentional Mistuning Journal of Engineering for Gas Turbines and Power, (2018); doi: 10.1115/1.4040715 Figaschewsky, F., Hanschke, B., Kühhorn, A. Efficient Generation of Engine Representative Tip Timing Data Based on a Reduced Order Model for Bladed Rotors Proceedings of ASME Turbo Expo 2018, GT2018-76342, June 11-15, 2018, Lillestrom (Oslo), Norwegen Awarded with the Rolls-Royce Innovation Award 2018 (2nd place) Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A. and Repetckii, O.V. Forced Response Reduction of a Blisk by Means of Intentional Mistuning Proceedings of ASME Turbo Expo 2018, GT2018-76584, June 11-15, 2018, Lillestrom (Oslo), Norwegen Weber, R., Kühhorn, A. Mistuning Identification Approach With Focus on High-Speed Centrifugal Compressors Proceedings of ASME Turbo Expo 2018, GT2018-75382, June 11-15, 2018, Lillestrom (Oslo), Norwegen doi: 10.1115/GT2018-75382 Wagner, F., Kühhorn, A., Janetzke, T. and Gerstberger, U. Multi-Objective Optimization of the Cooling Configuration of a High Pressure Turbine Blade Proceedings of ASME Turbo Expo 2018, GT2018-75616, June 11-15, 2018, Lillestrom (Oslo), Norwegen doi: 10.1115/GT2018-75616 Kober, M., Kühhorn, A. Stable implicit time-integration of flexible rotating structures—explanation for instabilities and concepts for avoidance Applied Mathematical Modelling, Volume 60, August 2018, Pages 235-243 Awarded with the Rolls-Royce Innovation Award 2018 (1st place) Kober, M., Kühhorn, A. und Keskin, A. Instability problems in implicit transient FEM simulations of fast rotating elastic structures - Description of the phenomenon and possible solutions Proceedings of NAFEMS DACH Conference 2018, Bamberg, May 14-16, 2018. ISBN 978-1-910643-14-3 Weber, R., Kühhorn, A. Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder Zwischenbericht, Frühjahrstagung 2018, Bad Neuenahr, 22.-23. März 2018, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R583-2018, S.159-190, Beirow, B., Kühhorn, A., Nipkau, J. Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning Advances in Mechanism Design II. Mechanisms and Machine Science, vol 44. Springer, Cham. https://doi.org/10.1007/978-3-319-44087-3_29 Figaschewsky, F., Kühhorn, A., Giersch, T. A Finite Element Based Least Square Fit for the Assessment of Integral and Non-Integral Vibrations With Blade Tip Timing Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017 Hanschke, B., Kühhorn, A., Schrape, S., Giersch, T. Consequences of Borescope Blending Repairs on Modern HPC Blisk Aeroelasticity Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017 Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A. Vibration Analysis of an Axial Turbine Blisk with Optimized Intentional Mistuning Pattern Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017 Kober, M., Kühhorn, A., Keskin, A., Singh, K. Challenges and opportunities of thermomechanical FEM simulations of high fidelity aero-engine models by implicit time-integration Proceedings of ISABE 2017, ISABE-2017-22524, Manchester, 2017 Beirow, B., Kühhorn, A., Figaschewsky, F., Hönisch, P., Giersch, T., Schrape, S. Model Update and Validation of a Mistuned High Pressure Compressor Blisk Proceedings of ISABE 2017, ISABE-2017-22568, Manchester, 2017 Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S. Analysis of Mistuned Forced Response in an Axial High Pressure Compressor Rig With Focus on Tyler-Sofrin Modes Proceedings of ISABE 2017, ISABE-2017-22614, Manchester, 2017 Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2017 Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A. Modal Analyses of an Axial Turbine Blisk With Intentional Mistuning Journal of Engineering for Gas Turbines and Power (2017); doi: 10.1115/1.4037588 Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A. Modal Analyses of an Axial Turbine Blisk With Intentional Mistuning Proceedings of ASME Turbo Expo 2017, GT2017-63193, June 26-30, 2017, Charlotte, NC, USA Maywald, T., Backhaus, T., Schrape, S., Kühhorn, A. Geometric Model Update of Blisks and its Experimental Validation for a Wide Frequency Range Proceedings of ASME Turbo Expo 2017, GT2017-63446, June 26-30, 2017, Charlotte, NC, USA Hanschke, B., Klauke, T., Kühhorn, A. The Effect of Foreign Object Damage on Compressor Blade High Cycle Fatigue Strength Proceedings of ASME Turbo Expo 2017, GT2017-63559, June 26-30, 2017, Charlotte, NC, USA Krause, C., Stelldinger, M., Hanschke, B., Kühhorn, A., Giersch, T. Asynchronous Response Analysis of Non-Contact Vibration Measurements on Compressor Rotor Blades Proceedings of ASME Turbo Expo 2017, GT2017-63200, June 26-30, 2017, Charlotte, NC, USA Backhaus, T., Maywald, T., Schrape, S., Voigt, M., Mailach, R. A Parametrization Describing Blisk Airfoil Variations Referring to Modal Analysis Proceedings of ASME Turbo Expo 2017, GT2017-64243, June 26-30, 2017, Charlotte, NC, USA Figaschewsky, F., Beirow, B., Kühhorn, A., Nipkau, J., Giersch, T., Power, B. Design and Analysis of an Intentional Mistuning Experiment Reducing Flutter Susceptibility and Minimizing Forced Response of a Jet Engine Fan Proceedings of ASME Turbo Expo 2017, GT2017-64621, June 26-30, 2017, Charlotte, NC, USA Noack, M., Kühhorn, A. Optimization Process for Flexible Structures with OptiStruct 4th European Altair Academic User Day, June 26th 2017 Weber, R., Kühhorn, A. Uncertainty Quantification for Predicted Endurance due to Mistuning in Turbomachinery Proceedings of the International Conference on Uncertainty in Structural Dynamics (USD2016), 19.-21.9.2016, Leuven, Paper ID 635 Weber, R., Kühhorn, A. Reduced Order Analyses of Multi-stage Coupled Structures with Main Focus on Disk-Dominated Modes Proceedings of the XII International Conference on the Theory of Machines and Mechanisms, 6.-8.9.2016, Liberec in: Mechanisms and Machine Science (pp. 263-268), Springer International Publishing , DOI 10.1007/978-3-319-44087-3 Beirow, B., Kühhorn, A., Nipkau, J. Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning Proceedings of the XII International Conference on the Theory of Machines and Mechanisms, 6.-8.9.2016, Liberec in: Mechanisms and Machine Science (pp. 223-229), Springer International Publishing , DOI 10.1007/978-3-319-44087-3 Kober, M., Kühhorn, A., Keskin, A. Implicit Time Integration Schemes for the FEM Simulation of Fast Rotating Structures WCCM XII & APCOM VI (World Congress on Computational Mechanics & Asia Pacific Congress on Computational Mechanics), 23.-29. Juli 2016, Seoul, South Korea Beirow, B., Maywald, T., Figaschewsky, F., Kühhorn, A., Heinrich, C.R., Giersch, T. Simplified Determination of Aerodynamic Damping for Bladed Rotors. Part 1: Experimental Validation at Rest Proceedings of ASME Turbo Expo 2016, GT2016-56535, June 13-17, 2016, Seoul, South Korea doi: 10.1115/GT2016-56535 Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Nipkau, J., Meinl, F. Simplified Estimation of Aerodynamic Damping for Bladed Rotors. Part 2: Experimental Validation During operation Proceedings of ASME Turbo Expo 2016, GT2016-56458, June 13-17, 2016, Seoul, South Korea doi: 10.1115/GT2016-56458 Wagner, F., Kühhorn, A., Weiss, T., Otto, D. Influence of different parametrizations on the optimum design of a high pressure turbine blade firtree Proceedings of ASME Turbo Expo 2016, GT2016-56749, June 13-17, 2016, Seoul, South Korea doi: 10.1115/GT2016-56749 Thomas Maywald, Arnold Kühhorn, Sven Schrape Experimental Validation of a Model Update Procedure Focusing on Small Geometric Deviations ECCOMAS VII European Congress on Computational Methods in Applied Sciences and Engineering, June 5-10, 2016, Crete, Greece doi: 10.7712/100016.1995.7386 Marco Stelldinger, Thomas Giersch, Felix Figaschewsky, Arnold Kühhorn A Semi-Unstructured Turbomachinery Meshing Library With Focus on Modeling of Specific Geometrical Features ECCOMAS VII European Congress on Computational Methods in Applied Sciences and Engineering, June 5-10, 2016, Crete, Greece doi: 10.7712/100016.1821.7554 E. Stelldinger, A. Kühhorn, M. Kober Experimental evaluation of the low-velocity impact damage resistance of CFRP tubes with integrated rubber layer Composite Structures, Volume 139, 1 April 2016, Pages 30–35 doi: 10.1016/j.compstruct.2015.11.069 Kober, M., Kühhorn, A., Mück, B. Topologieoptimierung eines fliehkraftbelasteten Triebwerkbauteils mit einfach zu implementierendem Algorithmus unter Berücksichtigung mehrerer Zielfunktionen NAFEMS-Online-Magazin, Oktober 2015 - Nr. 3/2015, 35. Ausgabe, ISSN 2311-522X Wagner, F., Kühhorn, A. Response surface based robust design optimization on the example of a high pressure turbine blade 8. Dresdner Probabilistik-Workshop, Technische Universität Dresden, 08.-09. Okt. 2015 Figaschewsky, F., Giersch T., Kühhorn A. Probabilistic Analysis of Low Engine Order Excitation Due to Geometric Perturbations of Upstream Nozzle Guide Vanes Proceedings of 22nd International Conference on Air Breathing Engines 2015, ISABE-2015-20165, 25-30 October 2015, Phoenix, USA Popig, F., Hönisch, P., Kühhorn, A. Experimental and Numerical Analysis of Geometrical Induced Mistuning Proceedings of ASME Turbo Expo 2015, GT2015-43272, 13-19 June 2015, Montréal, Canada Figaschewsky, F., Kühhorn, A. Analysis of Mistuned Blade Vibrations Based on Normally Distributed Blade Individual Natural Frequencies Proceedings of ASME Turbo Expo 2015, GT2015-43121, 13-19 June 2015, Montréal, Canada Ausgezeichnet mit dem Rolls-Royce Deutschland Innovationspreis 2015 Maywald, T., Beirow, B., Heinrich, C.R., Kühhorn, A. Vacuum Spin Test Series of a Turbine Impeller with Focus on Mistuning and Damping by Comparing Tip Timing and Strain Gauge Results Proceedings of ASME Turbo Expo 2015, GT2015-42649, 13-19 June 2015, Montréal, Canada Rey-Vilazon, J.M., Wildow, T., Kühhorn, A., Benton, R., Eydam,T. Advanced Turbine Preliminary Design Environment for the automatic Generation of Secondary Air System Models Proceedings of ASME Turbo Expo 2015, GT2015-42661, 13-19 June 2015, Montréal, Canada Wagner, F., Kühhorn, A., Parchem, R. Robust design optimization applied to a high pressure turbine blade based on surrogate modelling techniques Proceedings of ASME Turbo Expo 2015, GT2015-42365, 13-19 June 2015, Montréal, Canada Beirow, B., Kühhorn, A. Figaschewsky, F., Nipkau, J. Effect of Mistuning and Damping on the Forced Response of a Compressor Blisk Rotor Proceedings of ASME Turbo Expo 2015, GT2015-42036, 13-19 June 2015, Montréal, Canada Maywald, T. , Beirow, B., Kühhorn, A. Mistuning und Dämpfung von Radialturbinenrädern MTZ Motortechnische Zeitschrift, Juni 2015, S. 68 – 76, doi: 10.1007/s35146-015-0043-7 Maywald, T. , Beirow, B., Kühhorn, A. Mistuning and Damping of Turbine Impellers ATZ online, Juni 2015, www.atzonline.com/Artikel/3/18157/Mistuning-and-Damping-of-Turbine-Impellers.html Stelldinger, E., Kühhorn, A. und Kober, M. Failure Analysis of CFRP Tubes with Integrated Rubber Layers Subjected toTransverse Low-velocity Impact Loading Simulia Community Conference, 18.-21. Mai 2015, Berlin Kober, M., Kühhorn, A., Mück, B. Topologieoptimierung eines fliehkraftbelasteten Triebwerkbauteils mit neu entwickeltem Algorithmus unter Berücksichtigung mehrerer Zielfunktionen NAFEMS-Seminar zu Optimierung und Robust Design, 23. -24. März 2015, Wiesbaden Keskin, A., Kober, M., Stelldinger, E., Kühhorn, A., Böhm, H., Hornig, A., Langkamp, A. und Gude, M. On the quantification of errors of a pre-processing effort reducing contact meshing approach AIAA SciTech 2015, 5 - 9 January 2015, Kissimmee, Florida. Beirow, B., Giersch, T., Kühhorn, A., Nipkau, J. Optimization-Aided Forced Response Analysis of a Mistuned Compressor Blisk Journal of Engineering for Gas Turbines and Power 137(1), 2015, doi: 10.1115/1.4028095, ISSN: 1528-8919 Kober, M. , Kühhorn, A., Rademann, J., Mück, B. Nonlinear topology optimization of centrifugally loaded aero-engine part with newly developed optimality-criteria based algorithm Journal Aerospace Science and Technology, Volume 39, Dezember 2014, S. 705–711, doi:10.1016/j.ast.2014.09.005 Kober, M., Kühhorn, A., Kästner, B., Keskin, A. Evaluation of the Stress and Displacement Behavior of Different LS-Dyna Element Types in Combination with Different Anti-Hourglassing Formulations and Initial Element Deformations 13. LS-DYNA FORUM 2014, 6.-8. Oktober 2014, Bamberg, Tagungsband ISBN 978-3-9816215-1-8 Kober, M., Kühhorn, A., Stelldinger, E., Keskin, A. Identification of Stiffness Parameters of a Simplified Aero-Engine Mount System by Using a Higher Fidelity Model of the Mount System 13. LS-DYNA FORUM 2014, 6.-8. Oktober 2014, Bamberg, Tagungsband ISBN 978-3-9816215-1-8 Maywald, T., Beirow, B., Kühhorn, A. Mistuning und Dämpfung von Radialturbinenrädern II Abschlussbericht, Herbsttagung 2014, Dortmund, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R569 - 2014, S. 137-171, 23.-24. Sept. 2014 Rey Villazón, J.M., Kuehhorn, A. Adaptive CFD-Enhanced Windage Modelling for Aero Engine Turbine Rotor-Stator Cavities Joined 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI) conference, 21-25 July 2014 Barcelona Nouri, B., Kuehhorn, A. Automated CAE process for thermo-mechanical lifing prediction of a parameterized turbine blade with internal cooling Joined 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI) conference, Proceedings page 7285, 21-25 July 2014 Barcelona URL: http://www.wccm-eccm-ecfd2014.org/admin/files/fileabstract/a2070.pdf Nouri, B. Lehmann, K., Kühhorn, K. Interdisciplinary Analysis of a Turbine Blade With Internal Cooling Including Local Distribution and Rotation Effects 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, Proceedings 2014-2388, 16-20 June 2014 Atlanta ISBN: 978-1-62410-281-3 doi: 102514/6.2014-2388 Giersch, T., Figaschewsky, F, Hönisch, P., Kühhorn, A., Schrape, S. Numerical Analysis and Validation of the Rotor Blade Vibration Response Induced by High Pressure Compressor Deep Surge Proceedings of the ASME Turbo Expo 2014, Paper GT2014-26295, 16 – 20 June, Düsseldorf Rey Villazon, J. M., Wildow, T., Kühhorn, A., Benton, R., Göhler, M. Impact of the Secondary Air System Design Parameters on the Calculation of Turbine Discs Windage Proceedings of the ASME Turbo Expo 2014, Paper GT2014-26050 , 16 – 20 June, Düsseldorf Rey Villazon, J. M., Weiss, T., Guijarro Valencia, A. Introduction to Fluid-Structure Coupled Analyses of Turbomachinery using FE and CFD Methods Tutorial Session at the ASME Turbo Expo 2014, 19th June, Düsseldorf Beirow, B., Kühhorn, A., Giersch, T., Nipkau, J. Optimization-Aided Forced Response Analysis of a Mistuned Compressor Blisk Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25915, 16 – 20 June, Düsseldorf Tagungsband ISBN: 978-0-7918-4577-6 doi: 10.1115/GT2014-25915 Figaschewsky, F., Giersch, T., Kühhorn, A. Forced Response Prediction of an Axial Turbine Rotor With Regard to Aerodynamically Mistuned Excitation Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25896, 16 – 20 June, Düsseldorf Rauer, G., Kühhorn, A., Springmann, M. Residual Stress Modelling and Inverse Heat Transfer Coefficients Estimation of a Nickel-Based Superalloy Disc Forging Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25827, 16 – 20 June, Düsseldorf Kober, M., Kühhorn, A., Stelldinger, E., Keskin, A. Considerations about the Necessary Mesh Density of Bearings in Detailed Finite Element Models Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25624, 16 – 20 June, Düsseldorf Beirow, B., Maywald, Th., Kühhorn, A. Mistuning and Damping Aanalysis of a Radial Turbine Blisk in Varying Ambient Conditions Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25521, 16 – 20 June, Düsseldorf Popig, F. Forced Response Analysis of a Radial Inflow Turbine using STAR-CCM+ STAR Global Conference 2014, Wien, 17. -19. Mär. 2014 A. Zolochevsky, S. Sklepus, A. Galishin, A. Kühhorn, M. Kober A Comparison between the 3D and the Kirchhoff-Love Solutions for Cylinders under Creep-Damage Conditions TECHNISCHE MECHANIK, 34, 2, (2014), 104 - 113 Beirow, B., Giersch, T., Kühhorn, A., Nipkau, J. Forced Response Analysis of a Mistuned Compressor Blisk Journal of Engineering for Gas Turbines and Power 136(6), 11.02.2014 ISSN: 1528-8919 doi: 10.1115/1.4026537 Nouri, B., Kühhorn, A. Interdisciplinary analysis of turbine blade cooling channels of different aspect ratio and rotation numbers International Colloquium "Heat transfer phenomena in external fields: Basic research for next generation energy machines - A tribute to Richard Mollier", Dresden, 21. Nov. 2013 Rauer, G. Simulation von wärmebehandlungsbedingten Eigenspannungen in Triebwerksscheiben 15. Lausitzer FEM-Symposium, Cottbus, 15. Nov. 2013 Rey Villazon, J. M., Berthold, M., Kühhorn, A. Parametric Thermal Modeling Techniques for Turbine Rotor-Stator Cavities 6. Dresdner Probabilistik-Workshop. Technische Universität Dresden, 10.-11. Okt. 2013 Maywald, T., Kühhorn, A. Mistuning und Dämpfung von Radialturbinenrädern II Zwischenbericht, Herbsttagung 2013, Bad Neuenahr, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R565 - 2013, S. 59-82, 26.-27. Sept. 2013 Klauke, T., Strehlau, U., Kühhorn, A. Integer Frequency Veering of Mistuned Blade Integrated Disks Journal of Turbomachinery, Volume 135(6), 13.09.2013 Nouri, B., Kühhorn, A. CAE-Prozesskette der thermomechanischen Lebensdauerberechnung einer parametrisierten Turbinenschaufel mit interner Kühlung 31. CADFEM USERS’ MEETING 2013, Congress Center Rosengarten Mannheim, 20. Juni 2013 Beirow, B., Kühhorn, A., Giersch, T., Nipkau, J. Forced Response Analysis of A Mistuned Compressor Blisk Paper GT2013-94142, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA Nouri, B., Lehmann, K., Kühhorn, A. Investigations on Nusselt Number Enhancement in Ribbed Rectangular Turbine Blade Cooling Channels of Different Aspect Ratios and Rotation Numbers Paper GT2013-94710, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA Rey Villazon, J. M., Berthold, M., Kühhorn, A. Adaptive Flow Field Thermal Modeling Techniques for Turbine Rotor-Stator Cavities Paper GT2013-94845, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA Ausgezeichnet mit dem Rolls-Royce Deutschland Innovationspreis 2013 Giersch, T., Hönisch, P., Beirow, B., Kühhorn, A. Forced Response Analyses of Mistuned Radial Inflow Turbines Journal of Turbomachinery, Volume 135(3), 25.03.2013 Mahler-de Silva, T., Kühhorn, A., Kober, M. Developing a Simplified Surrogate Model for Structured Sheet Metals with Numerical and Experimental Comparisons GAMM 2013, 84th Annual Scientific Conference, 18. - 22. März 2013, Novi Sad Kober, M., Kühhorn, A. Comparison of different failure criteria for fiber-reinforced plastics in terms of fracture curves for arbitrary stress combinations Composites Science and Technology 72 (2012) 1941–1951 Nouri, B., Kühhorn, A. CAE-Prozesskette der thermomechanischen Lebensdauerberechnung einer parametrisierten Turbinenschaufel mit interner Kühlung 14. FEM Symposium, 30.11.2012, Cottbus Nouri, B., Kühhorn, A. Multidisziplinäre Simulation von Hochdruckturbinenschaufeln Ansys Conference & Cadfem User's Meeting, 25.10.2012, Kassel Hönisch, P., Strehlau, U., Kühhorn, A. Modelling of industrial blade integrated disks (blisks) with regard to mistuning Proceedings of the International Conference on Noise and Vibration Engineering, Paper ID 660, 17. - 19. Sept. 2012, Leuven Popig, F., Giersch,T., Beirow,B., Kühhorn, A. Application of Reduced Order Models for the Forced Response Analysis of a Mistuned High Pressure Compressor Blisk 17th Blade Mechanics Seminar & Exhibition, 12.09.2012, Winterthur, Switzerland Giersch, T., Beirow, B., Popig F., Kühhorn, A. FSI-based forced response analyses of a mistuned high pressure compressor blisk Proceedings of the VIRM 10, Paper C1326/012, 11. - 13. September 2012, London Rauer, G., Kühhorn, A., Springmann, M. Residual Stress Simulation of an Aero Engine Disc during Heat Treatment Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria, ISBN: 978-3-9502481-9-7 Beirow, B., Kühhorn, A., Nipkau, J. Schwingungsverhalten integraler Hochdruckverdichterlaufräder unter Berücksichtigung von Fluid-Struktur-Wechselwirkung und Mistuning Beitrag DLRK2012-281219, DGLR-Kongress 10. - 12. Sept. 2012, Berlin Zuchlinski, A., Kühhorn, A., Kober, M., Wehrenpfennig, L. Kombinierte Topologie- und Parameteroptimierung des Aufhängungssystems von heckinstallierten Turbofantriebwerken Beitrag DLRK2012-281168, DGLR-Kongress 10. - 12. Sept. 2012, Berlin Zolochevsky, A., Parkhomenko, L., Kühhorn, A. Analysis of oxygen exchange-limited transport and chemical stresses in perovskite-type hollow fibers Materials Chemistry and Physics 135 (2012) 594-603 Giersch, T., Hönisch, P., Beirow, B., Kühhorn, A. Forced Response Analyses of Mistuned Radial Inflow Turbines Proceedings of the ASME Turbo Expo 2012, Paper GT2012-69556, 11. - 15. June 2012, Copenhagen Rey Villazon, J. M., Kühhorn, A., Weiß, T. A Parametric Impact Study of the Geometry, Air System and Thermal Boundary Conditions on the Life of a Two-Stage High Pressure Turbine Proceedings of the ASME Turbo Expo 2012, Paper GT2012-68453, 11. - 15. June 2012, Copenhagen Zuchlinski, A., Kühhorn, A., Wehrenpfennig L. Strukturelle Optimierung der Aufhängung von heckinstallierten und parametrisierten Turbofantriebwerksmodellen Deutschsprachige NAFEMS Konferenz 2012, 8.-9. Mai 2012, Bamberg de Silva, T., Kühhorn, A., Golze, M. Entwicklung eines vereinfachten Ersatzmodells für strukturierte Bleche mittels Homogenisierungsmethode Deutschsprachige NAFEMS Konferenz 2012, 8.-9. Mai 2012, Bamberg de Silva, T., Kühhorn, A., Golze, M. Homogenization of thin structured sheet metals by using FEM GAMM 2012, 83rd Annual Scientific Conference, 26. - 30. März 2012, Darmstadt Zolochevsky, A., Martynenko, A., Kühhorn, A. Structural benchmark creep and creep damage testing for finite element analysis with material tension–compression asymmetry and symmetry Computers and Structures 100-101 (2012) 27–38 Maywald, T. Grundlegende Charakterisierung des Eigenschwingverhaltens eines zyklisch symmetrischen Mehrmassenschwingers mittels analytischer Methoden Deutscher Luft- und Raumfahrtkongress 2011, 27. September - 29. September 2011, Bremen Hönisch, P., Kühhorn, A. Mistuning und Dämpfung von Radialturbinen Abschlussbericht, Herbsttagung 2011, Fulda, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R 557, S. 77-102 Springmann, M., Kühhorn, A., Rauer, G. Giersch, T. Constitutive Modelling of Plastic and Creep Behaviour of the Nickel Base Superalloy ALLVAC® 718PLUS® under Heat Treatment Conditions Proceedings of the XX International Symposium on Air Breathing Engines (ISABE), paper 2011-1617, Göteborg, Schweden, 12.09.-16.09.2011, ISBN: 978-1-60086-895-5 Beirow, B., Kühhorn, A., Nipkau, J. An Equivalent Blisk Model Considering the Influence of the Air Flow on Blade Vibrations of a Mistuned Compressor Blisk Proceedings in Physics 139: Vibration Problems ICOVP 2011, pp. 549-555, Springer, ISBN 978-94-007-2068-8, 2011 Beirow, B., Nipkau, J., Kühhorn, A. Modal and Aeroelastic Analysis of a Compressor Blisk Considering Mistuning Proceedings of the ASME Turbo Expo 2011, Paper GT2011-45849, 6. - 10. Juni 2011, Vancouver Hönisch, P., Kühhorn, A., Beirow, B. Experimental and Numerical Analyses of Radial Turbine Blisks with Regard to Mistuning Proceedings of the ASME Turbo Expo 2011, Paper GT2011-45359, 6. - 10. Juni 2011, Vancouver Nipkau, J., Kühhorn, A., Beirow, B. Modal and Aeroelastic Analysis of a Mistuned Compressor Blisk Using an Equivalent Blisk Model Proc. of 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Istanbul, 21-25 March 2011 Stelldinger, E., Kühhorn, A., Kober, M. Optimization of a Carbon-fiber-reinforced Plastic Composite Structure using the Example of a Wing Rigger NAFEMS Seminar "Progresses in Simulating Composites, Wiesbaden, Germany, 6. - 7. April 2011 Hönisch, P., Kühhorn, A. Experimentelle und numerische Untersuchungen des Schwingungsverhaltens realer Radialturbinenlaufräder in Integralbauweise (Blisk) im Hinblick auf Verstimmung und Lokalisierung SIRM 2011 - 9. Internationale Tagung Schwingungen in rotierenden Maschinen, Darmstadt, Deutschland, 21.-23. Februar 2011 Strehlau, U., Kühhorn, A. Verstimmungsuntersuchungen am Laufrad (Blisk) eines modernen Flugtriebwerk-Hochdruckverdichters SIRM 2011 - 9. Internationale Tagung Schwingungen in rotierenden Maschinen, Darmstadt, Deutschland, 21.-23. Februar 2011 Hönisch, P., Kühhorn, A. Mistuning und Dämpfung von Radialturbinen Zwischenbericht, Herbsttagung 2010, Bamberg, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R 552, S. 31-53 Klauke, T., Kühhorn, A., Liang, L., Kober, M. Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge Internationale AVK-Tagung, 13.-14. September 2010, Essen Zuchlinski, A., Kühhorn, A. Strukturelle Optimierung der Aufhängung von heckinstallierten und parametrisierten Turbofantriebwerksmodellen Deutschsprachige Simulia-Nutzerkonferenz 2010, 20.-21.09.2010, Heidelberg Klauke, T., Kühhorn, A., Liang, L., Kober, M., Sieghart, D., Führer, M., Viehweger, B., Fritzsche, Ch., Sarradj, E. Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge Deutscher Luft- und Raumfahrtkongress 2010, 31. August - 2. September 2010, Hamburg Springmann, M.; Kühhorn, A.; Filipiak, A.; Hugler, D.; Dufour, K.-H. Generisches Flugtriebwerksmodell für die Anwendung in der Vorentwicklungsphase Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, Ausgabe 9-2010, S. 69-74 Strehlau, U., Kühhorn, A. Effects of blade mistuning on frequency veering regions of real HPC blisks 15th Blade Mechanics Seminar, 01.09.2010, Winterthur, Switzerland Strehlau, U., Kühhorn, A. Experimental and numerical investigations of HPC blisks with a focus on travelling waves Proceedings of the ASME Turbo Expo 2010: Power for Land Sea and Air, Paper GT2010-22463, June 14-18, 2010, Glasgow, Great Britain Kober, M., Kühhorn, A. Development of optimized washer-shape for damage-free load application to composites Composite Structures, Volume 92, S. 1985-1991 Kober, M. HyperWorks im Einsatz in der Lehre 4. HyperWorks Anwendertreffen für Hochschulen, 02.11.2009, Ludwigsburg Strehlau, U., Kühhorn, A. Experimental and numerical investigations of a HPC-Blisk with focus on travelling waves 14th Blade Mechanics Seminar, 02.09.2009, Winterthur, Switzerland Kühhorn, A., Beirow, B., Strehlau, U. Zum Schwingungsverhalten integraler Hochdruckverdichterlaufräder Deutscher Luft- und Raumfahrtkongress 2009, Paper DLRK2009-1219, 08. - 11.9.2009, Aachen ISBN 978-3-932182-64-2 Kober, M., Kühhorn, A. Development of optimized washer shape for damage-free load application to composites 15th International Conference on Composite Structures ICCS 15, Porto, Portugal, 15.-17. Juni 2009 Beirow, B., Kühhorn, A., Nipkau, J. On the Influence of Strain Gauge Instrumentation on Blade Vibrations of Integral Blisk Compressor Rotors Applying a Discrete Model Proceedings of the ASME Turbo Expo 2009: Paper GT2009-59207, ISBN 978-0-7918-3849-5, Orlando/FL., 8.-12. Juni 2009 Klauke, T., Kühhorn, A., Beirow, B., Golze, M. Numerical Investigations of Localized Vibrations of Mistuned Blade Integrated Disks (Blisks) ASME Journal of Turbomachinery, Vol. 131, Iss. 3, 2009 Klauke, T., Kühhorn, A., Kober, M. Application of a Newer Inter-Fiber-Failure Criteria on CFRPs in Aero Engine Development SIMULIA World Customer Conference, London, 18.-21. Mai 2009 Zolochevsky, A., Galishin, A., Kühhorn, A., Springmann, M. Transversal Shear Effect in Moderately Thick Shells from Materials with Characteristics Dependent on the Kind of Stress State under Creep-Damage Conditions: Numerical Modeling Technische Mechanik, Band 29, Heft 1, (2009), 48 - 59 Zolochevsky, A., Galishin, A., Kühhorn, A., Springmann, M. Transversal Shear Effect in Moderately Thick Shells from Materials with Characteristics Dependent on the Kind of Stress State under Creep-Damage Conditions: Theoretical Framework Technische Mechanik, Band 29, Heft 1, (2009), 38 - 47 Strehlau, U., Kühhorn, A., Beirow, B. Numerische und experimentelle Untersuchungen realer Hochdruckverdichterschaufelscheiben in Integralbauweise SIRM 2009 - 8. Internationale Tagung Schwingungen in rotierenden Maschinen, Wien, Österreich, 23.-25. Februar 2009 Kober, M., Kühhorn, A. Auslegung und Optimierungsprozess einer Tragstruktur in Faserverbundbauweise unter Berücksichtigung moderner Versagenskriterien Nationales SAMPE Symposium, Berlin, 18.-19. Februar 2009 Springmann, M., Kühhorn, A., Kuna, M., Scherzer, M. Influence of Strain Localization on Parameter Identification Journal of Engineering Materials and Technology, Vol. 131, 2009 Springmann, M., Kühhorn, A., Filipiak, A., Hugler, D., Dufour, K.-H. Automatic generation and optimization of a simplified aircraft engine model using a graphical user interface and full parameterization 20. Deutschsprachige ABAQUS-Benutzerkonferenz, Bad Homburg, 22.-23. September 2008 Strehlau, U., Kühhorn, A. Schwingungsverhalten von Hochdruckverdichterschaufelscheiben in Integralbauweise (Blisk) unter Berücksichtigung höherer Schwingungsmoden, Erzeugung und Messung von Umlaufwellen, 3D-Geometrievermessung Deutscher Luft- und Raumfahrtkongress 2008, DocumentID: 81170, 23. - 26.9.2008, Darmstadt Schrape, S., Kühhorn, A., Nipkau, J., Beirow, B. Application of Aeroelastic Methods in Compressor Cascade Configurations Using Partitioned Code Coupling ASME Pressure Vessels & Piping Conference, 27. - 31.7.2008, Chicago Springmann, M., Kühhorn, A. Coupled thermal-multiphase flow analysis in quenching processes for residual stress optimization in compressor and turbine disks ASME Pressure Vessels & Piping Conference, 27. - 31.7.2008, Chicago Springmann, M., Schlums, H. , Kühhorn, A. Numerical simulation of quenching processes for residual stress optimization in compressor and turbine disks Tagungsbeitrag: Multiphase Flows, Simulation, Experiment and Application, Dresden, 24.-26. Juni 2008 Kober, M., Kühhorn, A., Klauke, T., Lenk, O. Topology-Optimized Intermediate Casing of Aero Engine and Comparative Evaluation of Titanium and Composite Architecture in Terms of Load Capacity and Weight Reduction Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50644, 9. - 13. Juni 2008, Berlin Beirow, B., Kühhorn, A., Schrape, S. A Discrete model to consider the influence of the air flow on blade vibrations of an intergral blisk compressor rotor Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50613, 9. - 13. Juni 2008, Berlin Klauke, T., Kühhorn, A., Beirow, B., Parchem, R. Blade Vibration Phenomena of HPC Bliscs Considering Manufacturing Effects and Strain Gauge Application Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50683, 9. - 13. Juni 2008, Berlin Johann, E., Mueck, B., Nipkau, J. Experimental and Numerical Flutter investigation of the 1st Stage Rotor in 4-Stage High Speed Compressor Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50698, 9. - 13. Juni 2008, Berlin Nipkau, J., Schrape, S., Beirow, B., Kühhorn, A. Bestimmung aeroelastischer Parameter einer Hochdruckverdichter Stufe mit Hilfe Fluid-Struktur gekoppelter Berechnungen NAFEMS MAGAZIN, April 2008 - Nr. 1/2008, NAFEMS Kontakt DACH & Nordic, 2008 Nipkau, J., Kühhorn, A., Schrape, S. Determination of Aeroelastic Parameters of a High-Pressure-Compressor Stage using Fluid-Structure Interaction Calculations Proceedings of 5. NAFEMS CFD-Seminar: "Simulation komplexer Strömungsvorgänge - Anwendungen und Trends", 10. - 11.3.2008, Wiesbaden, ISBN 978-1-874376-33-0 Nipkau, J., Kühhorn, A., Schrape, S. Application of Fluid-Structure-Coupling for the Determination of Aeroelastic Parameters of a High-Pressure-Compressor-Blisk-Stage Proceedings of 9th MpCCI User Forum, 19. - 20.2.2008, Sankt Augustin, ISNN 1860-6296 Strehlau, U., Kühhorn, A. Research of higher modes E3E/1 stage 1 demonstrator blisk Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 Schrape, S., Kühhorn, A., Nipkau, J. Determination of Aerodynamic Damping of Axial-Compressor-Blades using Fluid-Structure-Interaction Methods Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 Springmann, M., Schlums, H., Kühhorn, A. Development of a new Nickel-base Alloy 718Plus for Compressor and Turbine disks Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 Beirow, B., Kühhorn, A., Schrape, S. Influence of Air Flow on Blisk Vibration Behaviour - an EBM-Based Approach Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 Kober, M., Kühhorn, A., Klauke, T. Auslegung einer Flanschverbindung aus faserverstärktem Kunststoff durch Optimierung der Faserorientierungen und Schichtdicken mit Hilfe von Altair HyperStudy unter Verwendung eines Wirkebenenbruchkriteriums als Nebenbedingung 2. HyperWorks Users Meeting für Hochschulen, Böblingen, 28. November 2007 Schrape, S., Kühhorn, A., Nipkau, J. Determination of Aerodynamic Damping of Axial-Compressor-Blades Using A Bidirectional Fluid-Structure-Simulation Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-027, Berlin, 10.-13.09.2007 Klauke, T., Kühhorn, A., Beirow, B. Blade Mistuning Induced Blisk Vibration Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-215, Berlin, 10.-13.09.2007 Beirow, B., Kühhorn, A., Schrape, S. Influence of Air Flow on Blisk Vibration Behaviour Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-058, Berlin, 10.-13.09.2007 Beirow, B., Kühhorn, A., Schrape, S. Blisk Vibration Phenomena in Consideration of Fluid Structure Interaction Proc. of 11th Int. NAFEMS World Congress, Vancouver, 22.-25.05. 2007 Schrape, S., Kühhorn, A., Golze, M. FSI of a Simplified Aero Engine Compressor Cascade Configuration GAMM-Proceedings in Applied Mathematics and Mechanics 6, 457 - 458 (2006) / DOI 10.1002/pamm.200610209 Springmann, M., Scherzer, M., Kuna, M., Kühhorn, A. Numerical simulation of localization phenomena in the frame of damage parameter identification NAFEMS Seminar: Materials Modeling, Niedernhausen, 05.-06.12.2006, ISBN 1-874376-19-0 Beirow, B., Kühhorn, A., R., Klauke, T. Lokalisierungsphänomen bei Hochdruckverdichterschaufelscheiben VDI-Schwingungstagung Schwingungen in Antrieben, Fulda, VDI-Berichte Nr. 1968, 2006. ISBN 3-18-091968-X Kober, M., Klauke, T., Kühhorn, A., Lenk, O. Einbindung eines modernen Wirkebenenbruchkriteriums für faserverstärkte Kunststoffe in eine Parameteroptimierung mit Altair HyperStudy 1. HyperWorks Users Meeting für Hochschulen, Böblingen, 28. November 2006 Kühhorn, A. FLUG-TRIEBWERKSTECHNIK - Inovative Studienrichtung an der BTU Cottbus unter Beteiligung von RRD, MTU und DLR Deutscher Luft- und Raumfahrtkongress 2006, Beitrag DGLR-2006-128, Band I+II, Braunschweig, 06.-09.11.2006. ISSN 0700-4083 Kühhorn, A., Beirow, B., Parchem, R., Klauke, T. Schaufelschwingungen bei realen Verdichter-Integralrädern (BLISK) Deutscher Luft- und Raumfahrtkongress 2006, Beitrag DGLR-2006-211, Band I+II, Braunschweig, 06.-09.11.2006. ISSN 0700-4083 Springmann, M., Filipiak, A., Kühhorn, A. Automatische Generierung eines vereinfachten Triebwerkmodells 18. Deutschsprachige ABAQUS-Benutzerkonferenz, Erfurt, 18.-19. September 2006 Schrape, S., Kühhorn, A., Golze, M. Simulation fluidgedämpfter Strukturschwingungen mittels partitioniertem Kopplungsansatz via MpCCI NAFEMS MAGAZIN, Juli 2006 - Nr. 2/2006, NAFEMS Kontakt DACH & Nordic, 2006 Kuna, M., Springmann, M. Determination of ductile damage parameters by local deformation fields Proceedings of the 16th Eurpean Conference of Fracture, Alexandroupolis, Greece, 03. - 07.07.2006 Beirow, B. Secure Power for Jet Engines Polytec LM Info - Optical Measurement Magazine, Issue 2 / 2006 Schrape, S., Kühhorn, A., Golze, M. Simulation fluidgedämpfter Strukturschwingungen durch partitionierte Fluid-Struktur-Kopplung mittels MpCCI Tagungsband des 3. NAFEMS CFD-Seminar: Simulation gekoppelter Strömungsvorgänge (Multifield FSI), Wiesbaden, 08. - 09. Mai 2006 Kühhorn, A., Beirow, B., Klauke, T. Theoretische und experimentelle Untersuchungen von Schaufelschwingungen bei Verdichterintegralräder n Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, Heft 19, 2006. ISSN 0947-6989 Schrape, S., Kühhorn, A. FSI of a Simplified Aero Engine Compressor Cascade Configuration GAMM Annual Meeting, March 27-31, Berlin, 2006 Schrape, S., Kühhorn, A., Golze, M. Simulation of fluid damped structural vibrations Proceedings of the 7th MpCCI User Forum, February 21-22, Schloss Birlinghoven, Sankt Augustin, Germany, ISSN 1860-6296, 2006 Springmann, M., Kuna, M. Determination of ductile damage parameters by local deformation fields: Measurement and Simulatio n Archive of Applied Mechanics, ISSN: 0939-1533 (Paper) 1432-0681 (Online), 2006 Schrodt, M., Benderoth, G., Kühhorn, A., Silber, G. Hyperelastic Description of Polymer Soft Foams at Finite Deformations Technische Mechanik, Band 25, Heft 3-4, (2005), 162-173 Schrape, S., Knöpke, M., Kühhorn, A., Hugler, D., Beirow, B., Golze, M. Simulation fluidgedämpfter Strukturschwingungen mittels partitionierter Fluid-Struktur-Kopplung Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 9. Jahrgang, Heft 18, 2005, ISSN 0947-6989 Schrape, S., Kühhorn, A., Golze, M., Knöpke, M., Voigt, C., Beirow, B. Fluid-Structure-Interaction of a Simplified Aero Engine Compressor Blade in an Airflow Channel 1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum, 05.-07. Oktober 2005 Kober, M. Application of different optimization methods on an aero engine component 1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum, 05.-07. Oktober 2005 Klauke, T., Kühhorn, A., Beirow, B. Experimental and numerical investigations of blade mistuning and strain gauge application effects in aero engine development The 12th Blade Mechanics Seminar, ABB Turbo Systems Ltd., Thermal Machinery Laboratory, Baden/Switzerland, 29. September 2005 Studener, J., Kühhorn, A. Thermomechanische Simulation des Annealprozesses von großen Siliziumwafern 17. Deutschsprachige ABAQUS-Benutzerkonferenz, Nürnberg, 19.-20. September 2005 Müller, T., Wahlich, R., Krottenthaler, P., Studener, J., Kühhorn, A., v. Ammon, W. Modeling and experimental verification of the 300mm Ar Anneal Process Material Science and Engineering B 124-125 (2005) 235-240 Beirow, B., Kühhorn, A., Golze, M., Klauke, T., Parchem, R. Experimental and Numerical Investigations of High Pressure Compressor Blades Vibration Behaviour Considering Mistuning 10th International NAFEMS World Congress, 17.-20.05.2005, Malta, ISBN 1 174 376 03 4 Chmielewski, T., Gorski, P., Beirow, B., Kretzschmar, J. Theoretical and Experimental Free Vibrations of Tall Industry Chimney with Flexibility of Soil Engeneering Structures 27(2005) 25 - 34. ISSN 0141-0296 Kühhorn, A. Möglichkeiten zur Beherschung von Schwingungsproblemen am Beispiel einer Verdichterstufe Innovationsforum Flugtriebwerkstechnik in Brandenburg, 07.-08.12.2004, Cottbus Kühhorn, A., Beirow, B., Klauke, T., Golze, M. Simulation der Mistuningeffekte von Hochdruckverdichter-Schaufelscheiben zur Bestimmung kritischer Schwingungen in Flugtriebwerken Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 8. Jahrgang, Heft 17, 2004, ISSN 0947-6989 Beirow, B., Kühhorn, A., Golze, M., Klauke, T. Experimentelle Untersuchungen des strukturdynamischen Verhaltens von Hochdruckverdichterschaufelscheiben in Integralbauweise (Blisks) mittels Laser-Doppler-Vibrometri e Deutscher Luft und Raumfahrt-Kongress 2004, Dresden, 20.-23. September 2004 Klauke, T., Kühhorn, A., Beirow, B., Golze, M., Parchem, R., Pianka, C., Eryilki, C. Numerische Untersuchung des Schwingungsverhaltens von Hochdruckverdichter-Blisks mit fertigungsbedingten Abweichungen Deutscher Luft und Raumfahrt-Kongress 2004, Dresden, 20.-23. September 2004 Kühhorn, A., Golze, M. Thickness flexible sandwich theory for the common description of global and local effects International Journal of Solids and Structures 41 (2004) 5425-5446 Beirow, B., Kühhorn, A., Golze, M., Klauke, T. Strukturdynamische Untersuchungen an Hochdruckverdichterschaufelscheiben unter Berücksichtigung von Mistunigeffekten VDI-Schwingungstagung, Wiesloch, 25.-26.05.2004, VDI-Berichte Nr. 1825, VDI-Verlag, Düsseldorf, 2004 Osterrieder, P., Beirow, B. Advanced dynamic methods for structural evaluation of TV towers Proceedings of the Centre of Structural Integrity, Opole, 2003, ISSN 1429-1525 Beirow, B., Kühhorn, A., Golze, M., Parchem, R., Johann, E. Experimentelle und numerische Untersuchungen hinsichtlich einer Festigkeitsauslegungsoptimierung von Hochdruckverdichter-Schaufelscheiben unter besondere Berücksichtigung von Misstuningeffekten Deutscher Luft und Raumfahrt-Kongress 2003, München, 17.-20. November 2003 Klauke, T., Kühhorn, A., Golze, M., Villwock, J., Lenk, O. Finite-Elemente Anwendung neuerer Faserverbund-Bruchkriterien und deren Verifizierung mittels CFK-Bauteilprüfung Deutscher Luft und Raumfahrt-Kongress 2003, München, 17.-20. November 2003 Kühhorn, A., Klauke, T., Golze, M. Simulation und Verifikation der sukzessiven Bruchabfolge eines CFK-Bauteils mittels neuartiger Bruchkriterien Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 7. Jahrgang, Heft 16, 2003, ISSN 0947-6989 Kühhorn, A., Beirow, B., Studener, J., Osterrieder, P., During, S. Messtechnische Beanspruchungsuntersuchungen beim Transport von Glasröhrenkollektoren Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 7. Jahrgang, Heft 16, 2003, ISSN 0947-6989 Studener, J., Kühhorn, A. FE-Simulation des thermischen Aufheizvorganges eines Silizium-Wafers im RTA (Rapid Thermal Anneal) 15. Deutschsprachige ABAQUS-Benutzerkonferenz, Fulda, 22.-23. September 2003 Kühhorn, A., Beirow, B. Schwingungsreduzierung an der Antriebseinheit eines Ultraleichtflugzeuges Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 6. Jahrgang, Heft 14, 2002, ISSN 0947-6989 Kühhorn, A., Beirow, B., Golze, M., Studener, J. Strukturmechanische Analyse einer Triebwerksverdichter-Schaufelscheibe Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 6. Jahrgang, Heft 14, 2002, ISSN 0947-6989 Chmielewski, T., Górski, P., Beirow, B., Kretschmar, J. Comparision of theoretical and experimental free vibrations of high industrial chimney interacting with soil Proc. XL VIII Konferencja Naukowa Problemy Naukowo - Badawcze, Krynica, 2002, ISBN 83-7125-091-6 Chmielewski, T., Górski, P., Beirow, B., Kretschmar, J. Porónanie teoretycznej I doświadczalnej analizy drgań własnych wysokiego komina prezemsłowego z uwzględnieniem podatności podłoża gruntowego Inżynieria Budownictwo 9/2002, pp. 510-512, ISSN 0021-0315 Beirow, B., Kühhorn, A. Schwingungsreduzierung an der Antriebseinheit eines Ultraleichtflugzeuges Deutscher Luft- u. Raumfahrtkongress Stuttgart, 2002. DGLR-Jahrbuch 2002, Band II, S. 1237-1242, DGLR-2002-003 Beirow, B., Kühhorn, A., Osterrieder, P. Windinduzierte Schwingungserregung von Fernmeldetürmen VDI-Berichte 1682, VDI-Verlag Düsseldorf, 2002. ISBN 3-18-091682-6 Kühhorn, A., Golze, M. Thickness flexible theory with generalized core warping for plane sandwich-structures Euromech Colloquium 444 - Critical Review of the Theories of Plates and Shells and New Applications, Bremen, September 22-25, 2002 Golze, M., Kühhorn, A. CFK-/GFK - Auslegung am Beispiel eines Modellflügels 14. Deutschsprachiges ABAQUS Anwendertreffen, Wiesbaden, 23. - 24. September 2002 Studener, J., Kühhorn, A. FE - Untersuchungen zum dynamischen Verhalten eine integralen Verdichterschaufelscheibe neuer Generation 14. Deutschsprachiges ABAQUS Anwendertreffen, Wiesbaden, 23. - 24. September 2002 Kühhorn, A., Golze, M. An Improved Sandwich Theory for a Better Prediction of the Wrinkling Phenomenon Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria, Editors: Mang, H.A.; Rammerstorfer, F.G.; Eberhardsteiner, J., Publisher: Vienna University of Technology, Austria, ISBN 3-9501554-0-6, http://wccm.tuwien.ac.at/publications/Papers/fp80058.pdf Beirow, B., Osterrieder, P., Kühhorn, A. Stochastisches Konzept für die Berechnung von Stahlschornsteinen infolge wirbelerregter Querschwingungen Berichte der Fachtagung Baustatik/Baupraxis 8, D. Dinkler (Herausgeber), Balkema, 2001 (ISBN: 3-926031-95-6) Beirow, B., Osterrieder, P. Dynamic Investigations of TV Towers Proceedings of the SEMC-Conference Cape Town, Zingoni (ed.), Elsevier, 2001 (ISBN: 0-08-043948-9) Kretzschmar, J., Beirow, B. Dynamic Diagnostic of Timber Structures Supported by Neural Networks Proc. Of 2nd Joint Workshop on Neural Networks in Civil Engineering, Cottbus, 26-28 März, 2000 Beirow, B. Application of Neural Networks in Structural Dynamics Joint Workshop on Neural Networks in Civil Engineering, Delft/NL, 12-13 April, 1999 Osterrieder, P., Beirow, B. Monitoring of Transmission Towers Structural Dynamics-EURODYN `99, Frýba & Náprstek (eds), Balkema, Rotterdam, 1999 (ISBN 90 5809 056 6) Osterrieder, P., Beirow, B. Überwachung von Fernseh- und Fernmeldetürmen Baustatik-Baupraxis 7, Meskouris(Hrsg.), Balkema, Rotterdam, 1999 (ISBN 90 5809 044 2) Beirow, B. Nutzung Neuronaler Netze zur Lösung dynamischer Problemstellungen bei turmartigen Bauwerken Beiträge zum 3. Cottbuser Workshop "Aspekte Neuronalen Lernens" (CoWAN `98), Skaker Verlag, Aachen, 1998 (ISBN 3-8265-4544-3) Schroth, G., Osterrieder, P., Beirow, B. Control and Inspection of Transmission Towers Using Dynamic Methods Proc. XLIII Konferencja Naukowa Problemy Naukowo - Badawcze Budownictwa, Krynica, 1997 (ISBN 83-87230-00-6) Schroth, G. ,Osterrieder, P., Beirow, B. Dynamic Investigations of Bell Tower Consisting of a Reinforced Concrete Frame with Masonry Proc. Structural Faults + Repair, Engineering Technics Press, Edinburgh, 1997 (ISBN 0 947644 35 9) Schroth, G., Osterrieder, P., Beirow, B., During, S. Dynamic Investigations of Church Bell Tower Proc. XLII Konferencja Naukowa Problemy Naukowo - Badawcze Budownictwa, Krynica, 1996 Beirow, B., Schroth, G., Osterrieder, P. Dynamic Diagnostic of Transmission Towers Proc. Second International Conference 'Structural Dynamics Modelling', Bell and Bain Ltd. Glasgow/Cumbria, 1996 (ISBN 0 874376 20 4) Kühhorn, A. Experimentelle Schwingungsanalyse am Beispiel einer PKW - Hinterachse Fachtagung: Dynamische Probleme im Maschinen- und Anlagenbau, HTWS, Zittau / Görlitz, 1996 Kühhorn, A. Anwendungsmöglichkeiten und Grenzen der Finite - Element - Methode (FEM) zur Konstruktionsberechnung und -optimierung Tagung zur FEM / CAD - Laboreinweihung, FHL Senftenberg, 1995 Kühhorn, A. Auslegung eines kohlefaserverstärkten, gefederten Freizeitrades Tagungsband zur Schweißfachtagung,DVS, Bezirksverband Cottbus, 1993 Kühhorn, A. Nichtlineare Theorie und finites Element für Sandwichtragwerke zur Beschreibung des globalen und lokalen Versagens ZAMM - Zeitschrift für angewandte Mathematik und Mechanik 73, 1993 Kühhorn, A., Schoop, H. A nonlinear theory for sandwich shells including the wrinkling phenomenon Archiv of Applied Mechanics 62, Springer-Verlag, 1992 Kühhorn, A. Modalsynthese an Flugtriebwerken Seminar über Fragen der Mechanik am Institut und Lehrstuhl für Mechanik, TU München, 1987
/fg-strukturmechanik/publikationen/veroeffentlichungen-und-vortraege
