Veröffentlichungen und Vorträge

Gambitta, M., Beirow, B., and Klauke, T.
Investigation of Rear Blisk Drum Dynamics Under Consideration of Multi-Stage Coupling.
ASME. Journal of Engineering for Gas Turbines and Power, February 2024, 146(2), 021017
https://doi.org/10.1115/1.4063633
Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2023 (2. Platz)

Gambitta, M., Beirow, B., Schrape, S.
Modelling Method for Aeroelastic Low Engine Order Excitation Originating from Upstream Vanes’ Geometrical Variability
Preprints 2023, 2023110493, https://doi.org/10.20944/preprints202311.0493.v1

Nakos, A., Beirow, B.,
On the Influence of Installation on the Forced Response of Radial Turbine Wheels
Proceedings of Global Power and Propulsion Society, GPPS Hongkong, October 16 - 19, 2023, DOI: 10.33737/gpps23-tc-138

Yang, J., Beirow, B., Giersch, T., Becker, B.
The Effect of Intentional Mistuning on a High Pressure Compressor Blisk Rotor
Proceedings of Global Power and Propulsion Society, GPPS Hongkong, October 16 - 19, 2023

Gambitta, M., Beirow, B., Klauke, T.
Investigation of Rear Blisk Drum Dynamics under Consideration of Multi-Stage Coupling
Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-103756, Boston, Massachusetts, June 26-30, 2023
doi.org/10.1115/GT2023-103756

Nakos, A., Beirow, B., Wirsum, M., Schafferus, M., Sasakaros, M., Vogt, D., Zobel, A.
Mistuning and Damping of a Radial Turbine Wheel. Part 3: Validation of Intentional Mistuning During Machine Operation
Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-101993, Boston, Massachusetts, June 26-30, 2023
doi: 10.1115/GT2023-101993

Zobel, A., Fuhrer, C., Vogt, D., Nakos, A., Beirow, B., Blessing, A., Zippack, C.
On the Influence of Bearing Modeling Details on the Dynamical System Effects of a Mid-Size Turbocharger Rotor
Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-102098, Boston, Massachusetts, June 26-30, 2023
https://doi.org/10.1115/GT2023-102098

Schafferus, M., Sasakaros, M., Wirsum, M., Zobel, A., Vogt, D., Nakos, A., Beirow, B.
Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 1: Nominal Inlet Guide Vane
Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-103037, Boston, Massachusetts, June 26-30, 2023
https://doi.org/10.1115/GT2023-103037

Sasakaros, M., Schafferus, M., Wirsum, M., Zobel, A., Vogt, D., Nakos, A., Beirow, B.
Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 2: Influence of Different Inlet Guide Vane Configurations
Proceedings of ASME Turbo Expo 2023, ASME Paper Number: GT2023-102243, Boston, Massachusetts, June 26-30, 2023
https://doi.org/10.1115/GT2023-102243

Kober, M., Beirow, B., Meyer, M., Singh, K.
Towards the Isogeometric Aero-Engine
Journalveröffentlichung, referiert, Results in Engineering Volume 18 (June 2023), ELSEVIER, doi.org/10.1016

Kober, M., Beirow, B., Singh, K.
Towards the Isogeometric Aero-Engine
Proceedings of 16th German LS-DYNA Forum, 11.-12. Oktober 2022, Bamberg, ISBN 978-3-9816215-8-7

ElMasry, S., Beirow, B., Figaschewsky, F., Giersch, Th.
Aeromechanical optimization of an axial compressor stage
25th ISABE Conference, 25–30 September 2022, Ottawa, Canada, Paper-Nr. ISABE_2022_275

Gambitta, M., Beirow, B., Schrape, S.
Modeling Method for Aeroelastic Low Engine Order Excitation Originating from Upstream Vanes’ Geometrical Variability
Proceedings of ISUAAAT16, Paper ISUAAAT16-070, Toledo/Spain, 19th -23rd September 2022

Nakos, A., Beirow, B., Zobel, A.
Vibration Analyses of Radial Turbine Wheels Considering Structural and Aerodynamic Mistuning
Proceedings of Global Power and Propulsion Society, ISSN-Nr: 2504-4400, GPPS Chania22, September 12 - 14, 2022

Gambitta, M., Beirow, B., Schrape, S.
A Digital Twin of Compressor Blisk Manufacturing Geometrical Variability for the Aeroelastic Uncertainty Quantification of the Aerodynamic Damping
Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82935, Rotterdam,The Netherlands, June 12-17, 2022

Yang, J., Beirow, B., Giersch, T.
Simulation and Investigation of an Intentionally Mistuned Blisk Rotor in an High Pressure Compressor
Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82576, Rotterdam,The Netherlands, June 12-17, 2022

Beirow, B., Golze, M., Popig, F.
Application of Intentional Mistuning to Reduce the Vibration Susceptibility of a Steam Turbine Wheel
Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-82208, Rotterdam,The Netherlands, June 12-17, 2022

Nakos, A., Beirow, B., Zobel, A.
Mistuning and Damping of a Radial Turbine Wheel. Part 2: Implementation And Validation of Intentional Mistuning
Proceedings of ASME Turbo Expo 2022, ASME Paper Number: GT2022-80643, Rotterdam,The Netherlands, June 12-17, 2022

Heinrich, C. R., Unglaube, T., Beirow, B., Brillert, D., Steff, K., and Petry, N.
Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems
ASME, Journal of Engineering for Gas Turbines and Power, May 17, 2022
doi: https://doi.org/10.1115/1.4054567

Nakos, A., Schafferus, M., Sasakaros, M., Zobel, A.
Intentional Mistuning zur Begrenzung erzwungener Schwingungsantworten von Radialturbinen
Zwischenbericht über das Vorhaben Nr. 1389 (AiF-Nr. 20992 BG), Frühjahrstagung 2022, Würzburg, 31. März - 1. April 2022, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R602 - 2022, S.523-558

Gambitta, M., Kühhorn, A., Beirow, B., Schrape, S.
Stator Blades Manufacturing Geometrical Variability in Axial Compressors and Impact on the Aeroelastic Excitation Forces
Journal of Turbomachinery, Volume 144 (4), April 2022
Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2021 (2. Platz)
DOI: https://doi.org/10.1115/1.4052602

Nakos, A., Beirow, B. Zobel, A.
Mistuning and Damping of a Radial Turbine Wheel. Part 1: Fundamental Analyses and Design of Intentional Mistuning Pattern
Journal of Engineering for Gas Turbines and Power, Feb. 2022, Volume 144, Issue 2
DOI: https://doi.org/10.1115/1.4052201

Beirow, B., Golze, M., Popig, F.
Vibration Reduction of a Steam Turbine Wheel by Means of Intentional Mistuning
Chapter in: Advances in Mechanism Design III, 2022, Springer International Publishing
doi: https://doi.org/10.1007/978-3-030-83594-1
Abstract

Beirow, B., Golze, M., Popig, F.
Vibration Reduction of a Steam Turbine Wheel by Means of Intentional Mistuning
XIII. International Conference on the Theory of Machines and Mechanisms, 2021, 7.-9. Spt., Technical University of Liberec
Abstact

Noack, M., Kühhorn, A., Kober, M., Firl, M.
A new stress-based topology optimization approach for finding flexible structures
Structural and Multidisciplinary Optimization, Vol. 64 (2021)
Link

Naveed, Z., Kühhorn, A., Kober, M.
An Isogeometric Based Study of Contact Behaviour for Rotating Structures
14th World Congress on Computational Mechanics (WCCM)-ECCOMAS Congress 2020 Virtual Conference: 11-15 January 2021
Link

Heinrich, C.R., Unglaube, T., Beirow, B., Brillert, D., Steff, K., Petry, N.
Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems
Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-58835, Virtual Conference, Online, June 7-11, 2021
Abstract

Gambitta, M., Kühhorn, A., Beirow, B., Schrape, S.
Stator Blades Manufacturing Geometrical Variability in Axial Compressors and Impact on the Aeroelastic Excitation Forces
Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-59642, Virtual Conference, Online, June 7-11, 2021
Abstract
Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2021 (2. Platz)

Nakos, A., Beirow, B., Zobel, A.
Mistuning and Damping of a Radial Turbine Wheel. Part 1: Fundamental Analyses and Design of Intentional Mistuning Pattern
Proceedings of ASME Turbo Expo 2021, ASME Paper Number: GT2021-59283, Virtual Conference, Online, June 7-11, 2021
Abstract

Beirow, B., Kühhorn, A., Weber, R., Popig, F.
Vibration Analyses of an Axial Turbine Wheel with Intentional Mistuning
Journal of Engineering for Gas Turbines and Power, 24. Dez. 2020

doi.org/10.1115/1.4049449


 

Heinrich, C.R., Kühhorn, A., Steff, K., Petry, N.
Generalized Model for the Approximation of Coupled Acousto-Mechanical Natural Frequencies in High-Pressure Centrifugal Compressors
Journal of Engineering for Gas Turbines and Power, 24. Dez. 2020

doi.org/10.1115/1.4049447


 

Beirow, B., Kühhorn, A., Weber, R., Popig, F.
Vibration Analyses of an Axial Turbine Wheel With Intentional Mistuning
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14468, Virtual Conference, Online, September 21 – 25, 2020

Hardenberg, A., Kühhorn, A., Fanter, M.
Correlating and Updating Finite Element Models of Different Fidelity Using an Energy-Based Approach
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14509, Virtual Conference, Online, September 21 – 25, 2020

ElMasry, S., Kühhorn, A., Figaschewsky, F.
Investigation of Working Line Variation Onto Forced Response Vibrations of a Compressor Blisk
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-15145, Virtual Conference, Online, September 21 – 25, 2020

Heinrich, C.R., Kühhorn, A., Steff, K.
Generalized Model for the Approximation of Coupled Acousto-Mechanical Natural Frequencies in High-Pressure Centrifugal Compressors
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-15281, Virtual Conference, Online, September 21 – 25, 2020

Gambitta, M., Kühhorn, A., Schrape, S.
Geometrical Variability Modelling of Axial Compressor Blisk Aerofoils and Evaluation of Impact on the Forced Response Problem
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-16168, Virtual Conference, Online, September 21 – 25, 2020

Franz, F., Kühhorn, A., Giersch, T., Schrape, S., Figaschewsky, F.
Influence of Inlet Distortions on the Forced Vibration of a High Pressure Compressor Rig
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-16221, Virtual Conference, Online, September 21 – 25, 2020

Weber, R., Kühhorn, A., Klauke, T., Schrape, S.
The Effect of Sand Erosion on a Compressor Blade and its Modal Properties
ASME 2020 Turbo Expo - Virtual Conference Session Gallery, ASME Paper Number: GT2020-14045, Virtual Conference, Online, September 21 – 25, 2020

Hardenberg, A., Kühhorn, A., Fanter, M.,
Bewertung der Auswirkungen von Strukturmodifikationen und Modellvereinfachungen unter Einsatz der FEA-FEA Korrelation auf
das Modalverhalten einer Triebwerksgehäusestruktur

VDI-Berichte 2366, VDI-Verlag Düsseldorf, 2019. ISBN 978-3-18-092366-6

Naveed, Z., Kühhorn, A., Kober, M.
Contact Behaviour of Isogeometric Analysis for Rotating Structures and its Industrial Application by Coupling to the Classical Finite Element Method
VII International Conference on Isogeometric Analysis, München, 18.-20. September 2019

Weber, R., Kühhorn, A., Beirow, B.
Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder
MTZ Motortechnische Zeitschrift 2019 80. Jahrgang 9. Ausgabe: S.74-78
DOI: https://doi.org/10.1007/s35146-019-0094-2

Weber, R., Kühhorn, A., Beirow, B.
Mistuning and Damping of Turbine and Compressor Impellers
MTZ worldwide 2019 Volume 80, Issue 9, pp 72-77
DOI: https://doi.org/10.1007/s38313-019-0090-4

Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A.:
Vibration analysis of a mistuned axial turbine blisk
Proceedings of ASME Turbo Expo 2019, GT2019-92047, June 15-21, 2019, Phoenix, AZ, USA

Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S., Nipkau, J.,
An inverse approach to identify tuned aerodynamic damping, system frequencies and mistuning – Part 3: Application to engine data
Proceedings of ASME Turbo Expo 2019, GT2019-91337, June 15-21, 2019, Phoenix, AZ, USA
DOI: https://doi.org/10.1115/GT2019-91337
Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2019 (1. Platz)

Maywald, T., Heinrich, C. R., Kühhorn, A.,Schrape, S., Backhaus, T.
Prediction of geometrically induced localization effects using a subset of nominal system modes
Proceedings of ASME Turbo Expo 2019, GT2019-90884, June 15-21, 2019, Phoenix, AZ, USA

Zishan Naveed, Arnold Kühhorn, Markus Kober
Comparative Evaluation of Isogeometric Analysis and Classical FEM with Regard to Contact Anaylsis
12th European LS-DYNA Conference 2019, 14 -16 May 2019, Koblenz, Germany
https://www.dynalook.com/conferences/12th-european-ls-dyna-conference-2019/isogeometric/naveed_btu.pdf

Weber, R., Kühhorn, A.
Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder
Abschlussbericht, Frühjahrstagung 2019, Würzburg, 28.-29. März 2019, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R588-2019, S.75-109

Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S.
Analysis of mistuned forced response in an axial high-pressure compressor rig with focus on Tyler–Sofrin modes
The Aeronautical Journal, 123(1261), 356-377
https://doi.org/10.1017/aer.2018.163

Beirow, B., Kühhorn, A., Figaschewsky, F., Hönisch, P., Giersch, T., & Schrape, S. (2019).
Model update and validation of a mistuned high-pressure compressor blisk
The Aeronautical Journal, 123(1260), 230-247
https://doi.org/10.1017/aer.2018.149

Henke, A.-S.; Noack, M.; Geyer, T.F.; Heinrich, C.R.; Beirow, B.; Sarradj, E.; Kühhorn, A.
Calculation of the Modal Behavior of Structured Sheet Metal
International Journal of Lightweight Materials and Manufacture, Febr. 2019

doi.org/10.1016/j.ijlmm.2019.01.004

Weber, R., Kühhorn, A.
Mistuning Identification Approach With Focus on High-Speed Centrifugal Compressors
Journal of Engineering for Gas Turbines and Power 141(3), 032507 (März 2019), GTP-18-1286

www.doi.org/10.1115/1.4040999

Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A.
Vibration Analysis of an Axial Turbine Blisk with Optimized Intentional Mistuning Pattern
Journal of Sound and Vibration, Volume 442, 3 March 2019, Pages 11-27.
https://doi.org/10.1016/j.jsv.2018.10.064

Benjamin Hanschke, Arnold Kühhorn, Sven Schrape, Thomas Giersch
Consequences of Borescope Blending Repairs on Modern HPC Blisk Aeroelasticity
January 2019, Journal of Turbomachinery 141(2), DOI: 10.1115/1.4041672

Kober, M., Kühhorn, A., Keskin, A.
Instabilitätsprobleme bei der impliziten transienten FEM-Simulation schnell rotierender elastischer Strukturen – Beschreibung des Phänomens und Lösungsmöglichkeiten
NAFEMS-Online-Magazin, Heft 48, S. 36-49, 2018, ISSN 2311-522X

Figaschewsky, F., Hanschke, B., Kühhorn, A.
Efficient Generation of Engine Representative Tip Timing Data Based on a Reduced Order Model for Bladed Rotors
Journal of Engineering for Gas Turbines and Power 141(1), 012503 (Nov 14,2018), GTP-18-1339
doi: 10.1115/1.4040748

Kober, M., Kühhorn, A., Keskin, A.
Optimization of Newmark-Euler Time-Integration Parameters for a Stable and Efficient Implicit Simulation of Rotating Elastic Structures
Proceedings of 15th German LS-DYNA Forum, 15.-17. Oktober 2018, Bamberg, ISBN 978-3-9816215-5-6
 

Weber, R., Kühhorn, A., Heinrich, C.R.
Modelling and analysis of a high-speed turbine impeller concerning mistuning
The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV), 10-13 September 2018, Lissabon, Portugal
doi: 10.1051/matecconf/201821118002

Figaschewsky, F., Kühhorn, A.
An Inverse Approach to Identify Tuned Aerodynamic Damping, System Frequencies, and Mistuning. Part 1: Theory Under Rotating Conditions
Paper ISUAAAT15-048, Proceedings of ISUAAAT15, Oxford, UK, 24-27th September 2018
>>Download (pdf)

Beirow, B., Kühhorn, A., Figaschewsky, F.
An Inverse Approach to Identify Tuned Aerodynamic Damping, System Frequencies, and Mistuning. Part 2: Application to Blisks at Rest
Paper ISUAAAT15-021, Proceedings of ISUAAAT15, Oxford, UK, 24-27th September 2018
>>Download (pdf)

Koch, I., Beirow, B., Filippatos, A., Kühhorn, A., and Gude, M.:
Methodical Approach for Simulation the Vibration of Damaged Fibre Reinforced Composite Rotors Under Consideration of Aerodynamic Influences
ECCM 18 – 18th European Conference on Composite Materials, Athens, Greece, 25 – 28th June 2018

Kober, M., Kühhorn, A.,  Keskin, A.
Instability Problems of Implicit FEM Solution Procedures for Fast Rotating Structures – Instability Sources and Solutions
WCCMXIII and PANACM II (World Congress on Computational Mechanics & Pan American Congress on Computational Mechanics), 22.-27. Juli 2018, New York, USA
>> Download (pdf)

Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A., Repetckii, O.
Forced Response Reduction of a Blisk by Means of Intentional Mistuning
Journal of Engineering for Gas Turbines and Power, (2018);
doi: 10.1115/1.4040715

Figaschewsky, F., Hanschke, B., Kühhorn, A.
Efficient Generation of Engine Representative Tip Timing Data Based on a Reduced Order Model for Bladed Rotors
Proceedings of ASME Turbo Expo 2018, GT2018-76342, June 11-15, 2018, Lillestrom (Oslo), Norwegen
Awarded with the Rolls-Royce Innovation Award 2018 (2nd place)

Beirow, B., Kühhorn, A., Figaschewsky, F., Bornhorn, A. and Repetckii, O.V.
Forced Response Reduction of a Blisk by Means of Intentional Mistuning
Proceedings of ASME Turbo Expo 2018, GT2018-76584, June 11-15, 2018, Lillestrom (Oslo), Norwegen

Weber, R., Kühhorn, A.
Mistuning Identification Approach With Focus on High-Speed Centrifugal Compressors
Proceedings of ASME Turbo Expo 2018, GT2018-75382, June 11-15, 2018, Lillestrom (Oslo), Norwegen
doi: 10.1115/GT2018-75382

Wagner, F., Kühhorn, A., Janetzke, T. and Gerstberger, U.
Multi-Objective Optimization of the Cooling Configuration of a High Pressure Turbine Blade
Proceedings of ASME Turbo Expo 2018, GT2018-75616, June 11-15, 2018, Lillestrom (Oslo), Norwegen
doi: 10.1115/GT2018-75616

Kober, M., Kühhorn, A.
Stable implicit time-integration of flexible rotating structures—explanation for instabilities and concepts for avoidance
Applied Mathematical Modelling, Volume 60, August 2018, Pages 235-243
Awarded with the Rolls-Royce Innovation Award 2018 (1st place)

Kober, M., Kühhorn, A. und Keskin, A.
Instability problems in implicit transient FEM simulations of fast rotating elastic structures - Description of the phenomenon and possible solutions
Proceedings of NAFEMS DACH Conference 2018, Bamberg, May 14-16, 2018. ISBN 978-1-910643-14-3

Weber, R., Kühhorn, A.
Mistuning und Dämpfung radialer Turbinen- und Verdichterlaufräder
Zwischenbericht, Frühjahrstagung 2018, Bad Neuenahr, 22.-23. März 2018, Forschungsvereinigung Verbrennungskraftmaschinen e.V. (FVV), Heft R583-2018, S.159-190,

Beirow, B., Kühhorn, A., Nipkau, J.
Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning
Advances in Mechanism Design II. Mechanisms and Machine Science, vol 44. Springer, Cham. https://doi.org/10.1007/978-3-319-44087-3_29

Figaschewsky, F., Kühhorn, A., Giersch, T.
A Finite Element Based Least Square Fit for the Assessment of Integral and Non-Integral Vibrations With Blade Tip Timing
Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017

Hanschke, B., Kühhorn, A., Schrape, S., Giersch, T.
Consequences of Borescope Blending Repairs on Modern HPC Blisk Aeroelasticity
Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017

Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A.
Vibration Analysis of an Axial Turbine Blisk with Optimized Intentional Mistuning Pattern
Proceedings of ISROMAC 2017, Maui, Hawaii, December 16-21, 2017

Kober, M., Kühhorn, A., Keskin, A., Singh, K.
Challenges and opportunities of thermomechanical FEM simulations of high fidelity aero-engine models by implicit time-integration
Proceedings of ISABE 2017, ISABE-2017-22524, Manchester, 2017

Beirow, B., Kühhorn, A., Figaschewsky, F., Hönisch, P., Giersch, T., Schrape, S.
Model Update and Validation of a Mistuned High Pressure Compressor Blisk
Proceedings of ISABE 2017, ISABE-2017-22568, Manchester, 2017

Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Schrape, S.
Analysis of Mistuned Forced Response in an Axial High Pressure Compressor Rig With Focus on Tyler-Sofrin Modes
Proceedings of ISABE 2017, ISABE-2017-22614, Manchester, 2017
Ausgezeichnet mit dem Rolls-Royce Innovationspreis 2017

Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A.
Modal Analyses of an Axial Turbine Blisk With Intentional Mistuning
Journal of Engineering for Gas Turbines and Power (2017);  doi: 10.1115/1.4037588

Beirow, B., Figaschewsky, F., Kühhorn, A., Bornhorn, A.
Modal Analyses of an Axial Turbine Blisk With Intentional Mistuning
Proceedings of ASME Turbo Expo 2017, GT2017-63193, June 26-30, 2017, Charlotte, NC, USA

Maywald, T., Backhaus, T., Schrape, S., Kühhorn, A.
Geometric Model Update of Blisks and its Experimental Validation for a Wide Frequency Range
Proceedings of ASME Turbo Expo 2017, GT2017-63446, June 26-30, 2017, Charlotte, NC, USA

Hanschke, B., Klauke, T., Kühhorn, A.
The Effect of Foreign Object Damage on Compressor Blade High Cycle Fatigue Strength
Proceedings of ASME Turbo Expo 2017, GT2017-63559, June 26-30, 2017, Charlotte, NC, USA

Krause, C., Stelldinger, M., Hanschke, B., Kühhorn, A., Giersch, T.
Asynchronous Response Analysis of Non-Contact Vibration Measurements on Compressor Rotor Blades
Proceedings of ASME Turbo Expo 2017, GT2017-63200, June 26-30, 2017, Charlotte, NC, USA

Backhaus, T., Maywald, T.,  Schrape, S., Voigt, M., Mailach, R.
A Parametrization Describing Blisk Airfoil Variations Referring to Modal Analysis
Proceedings of ASME Turbo Expo 2017, GT2017-64243, June 26-30, 2017, Charlotte, NC, USA

Figaschewsky, F., Beirow, B., Kühhorn, A., Nipkau, J., Giersch, T., Power, B.
Design and Analysis of an Intentional Mistuning Experiment Reducing Flutter Susceptibility and Minimizing Forced Response of a Jet Engine Fan
Proceedings of ASME Turbo Expo 2017, GT2017-64621, June 26-30, 2017, Charlotte, NC, USA

Noack, M., Kühhorn, A.
Optimization Process for Flexible Structures with OptiStruct
4th European Altair Academic User Day, June 26th 2017

Weber, R., Kühhorn, A.
Uncertainty Quantification for Predicted Endurance due to Mistuning in Turbomachinery
Proceedings of the International Conference on Uncertainty in Structural Dynamics (USD2016), 19.-21.9.2016, Leuven, Paper ID 635

Weber, R., Kühhorn, A.
Reduced Order Analyses of Multi-stage Coupled Structures with Main Focus on Disk-Dominated Modes
Proceedings of the XII International Conference on the Theory of Machines and Mechanisms, 6.-8.9.2016, Liberec
in: Mechanisms and Machine Science (pp. 263-268), Springer International Publishing,
DOI 10.1007/978-3-319-44087-3

Beirow, B., Kühhorn, A., Nipkau, J.
Forced Response Reduction of a Compressor Blisk Rotor Employing Intentional Mistuning
Proceedings of the XII International Conference on the Theory of Machines and Mechanisms, 6.-8.9.2016, Liberec
in: Mechanisms and Machine Science (pp. 223-229), Springer International Publishing,
DOI 10.1007/978-3-319-44087-3

Kober, M., Kühhorn, A.,  Keskin, A.
Implicit Time Integration Schemes for the FEM Simulation of Fast Rotating Structures
WCCM XII & APCOM VI (World Congress on Computational Mechanics & Asia Pacific Congress on Computational Mechanics), 23.-29. Juli 2016, Seoul, South Korea

Beirow, B., Maywald, T., Figaschewsky, F., Kühhorn, A., Heinrich, C.R., Giersch, T.
Simplified Determination of Aerodynamic Damping for Bladed Rotors. Part 1: Experimental Validation at Rest
Proceedings of ASME Turbo Expo 2016, GT2016-56535, June 13-17, 2016, Seoul, South Korea
doi: 10.1115/GT2016-56535

Figaschewsky, F., Kühhorn, A., Beirow, B., Giersch, T., Nipkau, J., Meinl, F.
Simplified Estimation of Aerodynamic Damping for Bladed Rotors. Part 2: Experimental Validation During operation
Proceedings of ASME Turbo Expo 2016, GT2016-56458, June 13-17, 2016, Seoul, South Korea
doi: 10.1115/GT2016-56458

Wagner, F., Kühhorn, A., Weiss, T., Otto, D.
Influence of different parametrizations on the optimum design of a high pressure turbine blade firtree
Proceedings of ASME Turbo Expo 2016, GT2016-56749, June 13-17, 2016, Seoul, South Korea
doi: 10.1115/GT2016-56749

Thomas Maywald, Arnold Kühhorn, Sven Schrape
Experimental Validation of a Model Update Procedure Focusing on Small Geometric Deviations
ECCOMAS VII European Congress on Computational Methods in Applied Sciences and Engineering, June 5-10, 2016, Crete, Greece
doi: 10.7712/100016.1995.7386

Marco Stelldinger, Thomas Giersch, Felix Figaschewsky, Arnold Kühhorn
A Semi-Unstructured Turbomachinery Meshing Library With Focus on Modeling of Specific Geometrical Features
ECCOMAS VII European Congress on Computational Methods in Applied Sciences and Engineering, June 5-10, 2016, Crete, Greece
doi: 10.7712/100016.1821.7554

E. Stelldinger, A. Kühhorn, M. Kober
Experimental evaluation of the low-velocity impact damage resistance of CFRP tubes with integrated rubber layer
Composite Structures, Volume 139, 1 April 2016, Pages 30–35
doi: 10.1016/j.compstruct.2015.11.069

Kober, M., Kühhorn, A., Mück, B.
Topologieoptimierung eines fliehkraftbelasteten Triebwerkbauteils mit einfach zu implementierendem Algorithmus unter Berücksichtigung mehrerer Zielfunktionen
NAFEMS-Online-Magazin, Oktober 2015 - Nr. 3/2015, 35. Ausgabe, ISSN 2311-522X

Wagner, F., Kühhorn, A.
Response surface based robust design optimization on the example of a high pressure turbine blade
8. Dresdner Probabilistik-Workshop, Technische Universität Dresden, 08.-09. Okt. 2015 

Figaschewsky, F., Giersch T., Kühhorn A.
Probabilistic Analysis of Low Engine Order Excitation Due to Geometric Perturbations of Upstream Nozzle Guide Vanes
Proceedings of 22nd International Conference on Air Breathing Engines 2015, ISABE-2015-20165, 25-30 October 2015, Phoenix, USA

Popig, F., Hönisch, P., Kühhorn, A.
Experimental and Numerical Analysis of Geometrical Induced Mistuning
Proceedings of ASME Turbo Expo 2015, GT2015-43272, 13-19 June 2015, Montréal, Canada

Figaschewsky, F., Kühhorn, A.
Analysis of Mistuned Blade Vibrations Based on Normally Distributed Blade Individual Natural Frequencies
Proceedings of ASME Turbo Expo 2015, GT2015-43121, 13-19 June 2015, Montréal, Canada
Ausgezeichnet mit dem Rolls-Royce Deutschland Innovationspreis 2015

Maywald, T., Beirow, B., Heinrich, C.R., Kühhorn, A.
Vacuum Spin Test Series of a Turbine Impeller with Focus on Mistuning and Damping by Comparing Tip Timing and Strain Gauge Results
Proceedings of ASME Turbo Expo 2015, GT2015-42649, 13-19 June 2015, Montréal, Canada

Rey-Vilazon, J.M., Wildow, T., Kühhorn, A., Benton, R., Eydam,T.
Advanced Turbine Preliminary Design Environment for the automatic Generation of Secondary Air System Models
Proceedings of ASME Turbo Expo 2015, GT2015-42661, 13-19 June 2015, Montréal, Canada

Wagner, F., Kühhorn, A., Parchem, R.
Robust design optimization applied to a high pressure turbine blade based on surrogate modelling techniques
Proceedings of ASME Turbo Expo 2015, GT2015-42365, 13-19 June 2015, Montréal, Canada

Beirow, B., Kühhorn, A. Figaschewsky, F., Nipkau, J.
Effect of Mistuning and Damping on the Forced Response of a Compressor Blisk Rotor
Proceedings of ASME Turbo Expo 2015, GT2015-42036, 13-19 June 2015, Montréal, Canada

Maywald, T. ,  Beirow, B., Kühhorn, A.
Mistuning und Dämpfung von Radialturbinenrädern
MTZ Motortechnische Zeitschrift, Juni 2015, S. 68 – 76, doi: 10.1007/s35146-015-0043-7

Maywald, T. ,  Beirow, B., Kühhorn, A.
Mistuning and Damping of Turbine Impellers

ATZ online, Juni 2015, www.atzonline.com/Artikel/3/18157/Mistuning-and-Damping-of-Turbine-Impellers.html

Stelldinger, E., Kühhorn, A. und Kober, M.


Failure Analysis of CFRP Tubes with Integrated Rubber Layers Subjected toTransverse Low-velocity Impact Loading
Simulia Community Conference, 18.-21. Mai 2015, Berlin

Kober, M., Kühhorn, A., Mück, B.
Topologieoptimierung eines fliehkraftbelasteten Triebwerkbauteils mit neu entwickeltem Algorithmus unter Berücksichtigung mehrerer Zielfunktionen
NAFEMS-Seminar zu Optimierung und Robust Design, 23. -24. März 2015, Wiesbaden

Keskin, A., Kober, M., Stelldinger, E., Kühhorn, A., Böhm, H., Hornig, A., Langkamp, A. und Gude, M.
On the quantification of errors of a pre-processing effort reducing contact meshing approach
AIAA SciTech 2015, 5 - 9 January 2015, Kissimmee, Florida.

Beirow, B., Giersch, T., Kühhorn, A., Nipkau, J.
Optimization-Aided Forced Response Analysis of a Mistuned Compressor Blisk
Journal of Engineering for Gas Turbines and Power 137(1), 2015, doi: 10.1115/1.4028095, ISSN: 1528-8919

Kober, M. , Kühhorn, A.,  Rademann, J., Mück, B.
Nonlinear topology optimization of centrifugally loaded aero-engine part with newly developed optimality-criteria based algorithm
Journal Aerospace Science and Technology, Volume 39, Dezember 2014, S. 705–711, doi:10.1016/j.ast.2014.09.005

Kober, M., Kühhorn, A., Kästner, B., Keskin, A.
Evaluation of the Stress and Displacement Behavior of Different LS-Dyna Element Types in Combination with Different Anti-Hourglassing Formulations and Initial Element Deformations
13. LS-DYNA FORUM 2014, 6.-8. Oktober 2014, Bamberg, Tagungsband  ISBN 978-3-9816215-1-8

Kober, M., Kühhorn, A., Stelldinger, E., Keskin, A.
Identification of Stiffness Parameters of a Simplified Aero-Engine Mount System by Using a Higher Fidelity Model of the Mount System
13. LS-DYNA FORUM 2014, 6.-8. Oktober 2014, Bamberg, Tagungsband  ISBN 978-3-9816215-1-8

Maywald, T., Beirow, B., Kühhorn, A.
Mistuning und Dämpfung von Radialturbinenrädern II
Abschlussbericht, Herbsttagung 2014, Dortmund, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R569 - 2014, S. 137-171, 23.-24. Sept. 2014

Rey Villazón, J.M., Kuehhorn, A.
Adaptive CFD-Enhanced Windage Modelling for Aero Engine Turbine Rotor-Stator Cavities
Joined 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI) conference, 21-25 July 2014 Barcelona

Nouri, B., Kuehhorn, A.
Automated CAE process for thermo-mechanical lifing prediction of a parameterized turbine blade with internal cooling
Joined 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI) conference, Proceedings page 7285, 21-25 July 2014 Barcelona
URL: http://www.wccm-eccm-ecfd2014.org/admin/files/fileabstract/a2070.pdf

Nouri, B. Lehmann, K., Kühhorn, K.
Interdisciplinary Analysis of a Turbine Blade With Internal Cooling Including Local Distribution and Rotation Effects
11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, Proceedings 2014-2388, 16-20 June 2014 Atlanta
ISBN: 978-1-62410-281-3    doi: 102514/6.2014-2388

Giersch, T., Figaschewsky, F, Hönisch, P., Kühhorn, A., Schrape, S.
Numerical Analysis and Validation of the Rotor Blade Vibration Response Induced by High Pressure Compressor Deep Surge
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-26295, 16 – 20 June, Düsseldorf

Rey Villazon, J. M., Wildow, T., Kühhorn, A., Benton, R., Göhler, M.
Impact of the Secondary Air System Design Parameters on the Calculation of Turbine Discs Windage
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-26050 , 16 – 20 June, Düsseldorf

Rey Villazon, J. M., Weiss, T., Guijarro Valencia, A.
Introduction to Fluid-Structure Coupled Analyses of Turbomachinery using FE and CFD Methods
Tutorial Session at the ASME Turbo Expo 2014, 19th June, Düsseldorf

Beirow, B., Kühhorn, A., Giersch, T., Nipkau, J.
Optimization-Aided Forced Response Analysis of a Mistuned Compressor Blisk
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25915, 16 – 20 June, Düsseldorf
Tagungsband ISBN: 978-0-7918-4577-6      doi: 10.1115/GT2014-25915

Figaschewsky, F., Giersch, T., Kühhorn, A.
Forced Response Prediction of an Axial Turbine Rotor With Regard to Aerodynamically Mistuned Excitation
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25896, 16 – 20 June, Düsseldorf

Rauer, G., Kühhorn, A., Springmann, M.
Residual Stress Modelling and Inverse Heat Transfer Coefficients Estimation of a Nickel-Based Superalloy Disc Forging
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25827, 16 – 20 June, Düsseldorf

Kober, M., Kühhorn, A., Stelldinger, E., Keskin, A.
Considerations about the Necessary Mesh Density of Bearings in Detailed Finite Element Models
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25624, 16 – 20 June, Düsseldorf

Beirow, B., Maywald, Th., Kühhorn, A.
Mistuning and Damping Aanalysis of a Radial Turbine Blisk in Varying Ambient Conditions
Proceedings of the ASME Turbo Expo 2014, Paper GT2014-25521, 16 – 20 June, Düsseldorf

Popig, F.
Forced Response Analysis of a Radial Inflow Turbine using STAR-CCM+
STAR Global Conference 2014, Wien, 17. -19. Mär. 2014

A. Zolochevsky, S. Sklepus, A. Galishin, A. Kühhorn, M. Kober
A Comparison between the 3D and the Kirchhoff-Love Solutions for Cylinders under Creep-Damage Conditions
TECHNISCHE MECHANIK, 34, 2, (2014), 104 - 113

Beirow, B., Giersch, T., Kühhorn, A., Nipkau, J.
Forced Response Analysis of a Mistuned Compressor Blisk
Journal of Engineering for Gas Turbines and Power 136(6), 11.02.2014
ISSN: 1528-8919   doi: 10.1115/1.4026537

Nouri, B., Kühhorn, A.
Interdisciplinary analysis of turbine blade cooling channels of different aspect ratio and rotation numbers
International Colloquium "Heat transfer phenomena in external fields: Basic research for next generation energy machines - A tribute to Richard Mollier", Dresden, 21. Nov. 2013

Rauer, G.
Simulation von wärmebehandlungsbedingten Eigenspannungen in Triebwerksscheiben
15. Lausitzer FEM-Symposium, Cottbus, 15. Nov. 2013

Rey Villazon, J. M., Berthold, M., Kühhorn, A.
Parametric Thermal Modeling Techniques for Turbine Rotor-Stator Cavities
6. Dresdner Probabilistik-Workshop. Technische Universität Dresden, 10.-11. Okt. 2013

Maywald, T., Kühhorn, A.
Mistuning und Dämpfung von Radialturbinenrädern II
Zwischenbericht, Herbsttagung 2013, Bad Neuenahr, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R565 - 2013, S. 59-82, 26.-27. Sept. 2013

Klauke, T., Strehlau, U., Kühhorn, A.
Integer Frequency Veering of Mistuned Blade Integrated Disks
Journal of Turbomachinery, Volume 135(6), 13.09.2013

Nouri, B., Kühhorn, A.
CAE-Prozesskette der thermomechanischen Lebensdauerberechnung einer parametrisierten Turbinenschaufel mit interner Kühlung
31. CADFEM USERS’ MEETING 2013, Congress Center Rosengarten Mannheim,  20. Juni 2013

Beirow, B., Kühhorn, A., Giersch, T., Nipkau, J.
Forced Response Analysis of A Mistuned Compressor Blisk
Paper GT2013-94142, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA

Nouri, B., Lehmann, K., Kühhorn, A.
Investigations on Nusselt Number Enhancement in Ribbed Rectangular Turbine Blade Cooling Channels of Different Aspect Ratios and Rotation Numbers
Paper GT2013-94710, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA

Rey Villazon, J. M., Berthold, M., Kühhorn, A.
Adaptive Flow Field Thermal Modeling Techniques for Turbine Rotor-Stator Cavities
Paper GT2013-94845, Proceedings of ASME Turbo Expo 2013, June 3-7, San Antonio, Texas, USA
Ausgezeichnet mit dem Rolls-Royce Deutschland Innovationspreis 2013

Giersch, T., Hönisch, P., Beirow, B., Kühhorn, A.
Forced Response Analyses of Mistuned Radial Inflow Turbines
Journal of Turbomachinery, Volume 135(3), 25.03.2013

Mahler-de Silva, T., Kühhorn, A., Kober, M.
Developing a Simplified Surrogate Model for Structured Sheet Metals with Numerical and Experimental Comparisons
GAMM 2013, 84th Annual Scientific Conference, 18. - 22. März 2013, Novi Sad

Kober, M., Kühhorn, A.
Comparison of different failure criteria for fiber-reinforced plastics in terms of fracture curves for arbitrary stress combinations
Composites Science and Technology 72 (2012) 1941–1951

Nouri, B., Kühhorn, A.
CAE-Prozesskette der thermomechanischen Lebensdauerberechnung einer parametrisierten Turbinenschaufel mit interner Kühlung
14. FEM Symposium, 30.11.2012, Cottbus

Nouri, B., Kühhorn, A.
Multidisziplinäre Simulation von Hochdruckturbinenschaufeln
Ansys Conference & Cadfem User's Meeting, 25.10.2012, Kassel

Hönisch, P., Strehlau, U., Kühhorn, A.
Modelling of industrial blade integrated disks (blisks) with regard to mistuning
Proceedings of the International Conference on Noise and Vibration Engineering, Paper ID 660, 17. - 19. Sept. 2012, Leuven

Popig, F., Giersch,T., Beirow,B., Kühhorn, A.
Application of Reduced Order Models for the Forced Response Analysis of a Mistuned High Pressure Compressor Blisk
17th Blade Mechanics Seminar & Exhibition, 12.09.2012, Winterthur, Switzerland

Giersch, T., Beirow, B., Popig F., Kühhorn, A.
FSI-based forced response analyses of a mistuned high pressure compressor blisk
Proceedings of the VIRM 10, Paper C1326/012, 11. - 13. September 2012, London

Rauer, G., Kühhorn, A., Springmann, M.
Residual Stress Simulation of an Aero Engine Disc during Heat Treatment
Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering
(ECCOMAS 2012), September 10-14, 2012, Vienna, Austria, ISBN: 978-3-9502481-9-7

Beirow, B., Kühhorn, A., Nipkau, J.
Schwingungsverhalten integraler Hochdruckverdichterlaufräder unter Berücksichtigung von Fluid-Struktur-Wechselwirkung und Mistuning
Beitrag DLRK2012-281219, DGLR-Kongress 10. - 12. Sept. 2012, Berlin

Zuchlinski, A., Kühhorn, A., Kober, M., Wehrenpfennig, L.
Kombinierte Topologie- und Parameteroptimierung des Aufhängungssystems von heckinstallierten Turbofantriebwerken
Beitrag DLRK2012-281168, DGLR-Kongress 10. - 12. Sept. 2012, Berlin

Zolochevsky, A., Parkhomenko, L., Kühhorn, A.
Analysis of oxygen exchange-limited transport and chemical stresses in perovskite-type hollow fibers
Materials Chemistry and Physics 135 (2012) 594-603

Giersch, T., Hönisch, P., Beirow, B., Kühhorn, A.
Forced Response Analyses of Mistuned Radial Inflow Turbines
Proceedings of the ASME Turbo Expo 2012, Paper GT2012-69556, 11. - 15. June 2012, Copenhagen

Rey Villazon, J. M., Kühhorn, A., Weiß, T.
A Parametric Impact Study of the Geometry, Air System and Thermal Boundary Conditions on the Life of a Two-Stage High Pressure Turbine
Proceedings of the ASME Turbo Expo 2012, Paper GT2012-68453, 11. - 15. June 2012, Copenhagen

Zuchlinski, A., Kühhorn, A., Wehrenpfennig L.
Strukturelle Optimierung der Aufhängung von heckinstallierten und parametrisierten Turbofantriebwerksmodellen
Deutschsprachige NAFEMS Konferenz 2012,  8.-9. Mai 2012, Bamberg

de Silva, T., Kühhorn, A., Golze, M.
Entwicklung eines vereinfachten Ersatzmodells für strukturierte Bleche mittels Homogenisierungsmethode
Deutschsprachige NAFEMS Konferenz 2012,  8.-9. Mai 2012, Bamberg

de Silva, T., Kühhorn, A., Golze, M.
Homogenization of thin structured sheet metals by using FEM
GAMM 2012, 83rd Annual Scientific Conference, 26. - 30. März 2012, Darmstadt

Zolochevsky, A., Martynenko, A., Kühhorn, A.
Structural benchmark creep and creep damage testing for finite element analysis with material tension–compression asymmetry and symmetry
Computers and Structures 100-101 (2012) 27–38

Maywald, T. 
Grundlegende Charakterisierung des Eigenschwingverhaltens eines zyklisch symmetrischen Mehrmassenschwingers mittels analytischer Methoden 
Deutscher Luft- und Raumfahrtkongress 2011, 27. September - 29. September 2011, Bremen

Hönisch, P., Kühhorn, A.
Mistuning und Dämpfung von Radialturbinen
Abschlussbericht, Herbsttagung 2011, Fulda, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R 557, S. 77-102

Springmann, M., Kühhorn, A., Rauer, G. Giersch, T.
Constitutive Modelling of Plastic and Creep Behaviour of the Nickel Base Superalloy ALLVAC® 718PLUS® under Heat Treatment Conditions
Proceedings of the XX International Symposium on Air Breathing Engines (ISABE), paper 2011-1617, Göteborg, Schweden, 12.09.-16.09.2011, ISBN: 978-1-60086-895-5

Beirow, B., Kühhorn, A., Nipkau, J.
An Equivalent Blisk Model Considering the Influence of the Air Flow on Blade Vibrations of a Mistuned Compressor Blisk
Proceedings in Physics 139: Vibration Problems ICOVP 2011, pp. 549-555, Springer, ISBN 978-94-007-2068-8, 2011

Beirow, B., Nipkau, J., Kühhorn, A.
Modal and Aeroelastic Analysis of a Compressor Blisk Considering Mistuning
Proceedings of the ASME Turbo Expo 2011, Paper GT2011-45849, 6. - 10. Juni 2011, Vancouver

Hönisch, P., Kühhorn, A., Beirow, B.
Experimental and Numerical Analyses of Radial Turbine Blisks with Regard to Mistuning
Proceedings of the ASME Turbo Expo 2011, Paper GT2011-45359, 6. - 10. Juni 2011, Vancouver

Nipkau, J., Kühhorn, A., Beirow, B.
Modal and Aeroelastic Analysis of a Mistuned Compressor Blisk Using an Equivalent Blisk Model
Proc. of 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Istanbul, 21-25 March 2011

Stelldinger, E., Kühhorn, A., Kober, M.
Optimization of a Carbon-fiber-reinforced Plastic Composite Structure using the Example of a Wing Rigger
NAFEMS Seminar "Progresses in Simulating Composites, Wiesbaden, Germany, 6. - 7. April 2011

Hönisch, P., Kühhorn, A.
Experimentelle und numerische Untersuchungen des Schwingungsverhaltens realer Radialturbinenlaufräder in Integralbauweise (Blisk) im Hinblick auf Verstimmung und Lokalisierung
SIRM 2011 - 9. Internationale Tagung Schwingungen in rotierenden Maschinen, Darmstadt, Deutschland, 21.-23. Februar 2011

Strehlau, U., Kühhorn, A.
Verstimmungsuntersuchungen am Laufrad (Blisk) eines modernen Flugtriebwerk-Hochdruckverdichters
SIRM 2011 - 9. Internationale Tagung Schwingungen in rotierenden Maschinen, Darmstadt, Deutschland, 21.-23. Februar 2011

Hönisch, P., Kühhorn, A.
Mistuning und Dämpfung von Radialturbinen
Zwischenbericht, Herbsttagung 2010, Bamberg, Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Heft R 552, S. 31-53

Klauke, T., Kühhorn, A., Liang, L., Kober, M.
Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge
Internationale AVK-Tagung, 13.-14. September 2010, Essen

Zuchlinski, A., Kühhorn, A.
Strukturelle Optimierung der Aufhängung von heckinstallierten und parametrisierten Turbofantriebwerksmodellen
Deutschsprachige Simulia-Nutzerkonferenz 2010, 20.-21.09.2010, Heidelberg

Klauke, T., Kühhorn, A., Liang, L., Kober, M., Sieghart, D., Führer, M., Viehweger, B., Fritzsche, Ch., Sarradj, E.
Entwicklung eines 3-Blatt-CFK-Verstellpropellers für Ultraleichtflugzeuge
Deutscher Luft- und Raumfahrtkongress 2010, 31. August - 2. September 2010, Hamburg

Springmann, M.; Kühhorn, A.; Filipiak, A.; Hugler, D.; Dufour, K.-H.
Generisches Flugtriebwerksmodell für die Anwendung in der Vorentwicklungsphase
Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, Ausgabe 9-2010, S. 69-74

Strehlau, U., Kühhorn, A.
Effects of blade mistuning on frequency veering regions of real HPC blisks
15th Blade Mechanics Seminar, 01.09.2010, Winterthur, Switzerland

Strehlau, U., Kühhorn, A.
Experimental and numerical investigations of HPC blisks with a focus on travelling waves
Proceedings of the ASME Turbo Expo 2010: Power for Land Sea and Air, Paper GT2010-22463, June 14-18, 2010, Glasgow, Great Britain

Kober, M., Kühhorn, A.
Development of optimized washer-shape for damage-free load application to composites
Composite Structures, Volume 92, S. 1985-1991

Kober, M.
HyperWorks im Einsatz in der Lehre
4. HyperWorks Anwendertreffen für Hochschulen, 02.11.2009, Ludwigsburg

Strehlau, U., Kühhorn, A.
Experimental and numerical investigations of a HPC-Blisk with focus on travelling waves
14th Blade Mechanics Seminar, 02.09.2009, Winterthur, Switzerland

Kühhorn, A., Beirow, B., Strehlau, U.
Zum Schwingungsverhalten integraler Hochdruckverdichterlaufräder
Deutscher Luft- und Raumfahrtkongress 2009, Paper DLRK2009-1219, 08. - 11.9.2009, Aachen ISBN 978-3-932182-64-2

Kober, M., Kühhorn, A.
Development of optimized washer shape for damage-free load application to composites
15th International Conference on Composite Structures ICCS 15, Porto, Portugal, 15.-17. Juni 2009

Beirow, B., Kühhorn, A., Nipkau, J.
On the Influence of Strain Gauge Instrumentation on Blade Vibrations of Integral Blisk Compressor Rotors Applying a Discrete Model
Proceedings of the ASME Turbo Expo 2009: Paper GT2009-59207, ISBN 978-0-7918-3849-5, Orlando/FL., 8.-12. Juni 2009

Klauke, T., Kühhorn, A., Beirow, B., Golze, M.
Numerical Investigations of Localized Vibrations of Mistuned Blade Integrated Disks (Blisks)
ASME Journal of Turbomachinery, Vol. 131, Iss. 3, 2009

Klauke, T., Kühhorn, A., Kober, M.
Application of a Newer Inter-Fiber-Failure Criteria on CFRPs in Aero Engine Development
SIMULIA World Customer Conference, London, 18.-21. Mai 2009

Zolochevsky, A., Galishin, A., Kühhorn, A., Springmann, M.
Transversal Shear Effect in Moderately Thick Shells from Materials with Characteristics Dependent on the Kind of Stress State under Creep-Damage Conditions: Numerical Modeling
Technische Mechanik, Band 29, Heft 1, (2009), 48 - 59

Zolochevsky, A., Galishin, A., Kühhorn, A., Springmann, M.
Transversal Shear Effect in Moderately Thick Shells from Materials with Characteristics Dependent on the Kind of Stress State under Creep-Damage Conditions: Theoretical Framework
Technische Mechanik, Band 29, Heft 1, (2009), 38 - 47

Strehlau, U., Kühhorn, A., Beirow, B.
Numerische und experimentelle Untersuchungen realer Hochdruckverdichterschaufelscheiben in Integralbauweise
SIRM 2009 - 8. Internationale Tagung Schwingungen in rotierenden Maschinen, Wien,  Österreich, 23.-25. Februar 2009

Kober, M., Kühhorn, A.
Auslegung und Optimierungsprozess einer Tragstruktur in Faserverbundbauweise unter Berücksichtigung moderner Versagenskriterien
Nationales SAMPE Symposium, Berlin, 18.-19. Februar 2009

Springmann, M., Kühhorn, A., Kuna, M., Scherzer, M.
Influence of Strain Localization on Parameter Identification
Journal of Engineering Materials and Technology, Vol. 131, 2009

Springmann, M., Kühhorn, A., Filipiak, A., Hugler, D., Dufour, K.-H.
Automatic generation and optimization of a simplified aircraft engine model using a graphical user interface and full parameterization
20. Deutschsprachige ABAQUS-Benutzerkonferenz, Bad Homburg, 22.-23. September 2008

Strehlau, U., Kühhorn, A.
Schwingungsverhalten von Hochdruckverdichterschaufelscheiben in Integralbauweise (Blisk) unter Berücksichtigung höherer Schwingungsmoden, Erzeugung und Messung von Umlaufwellen, 3D-Geometrievermessung
Deutscher Luft- und Raumfahrtkongress 2008, DocumentID: 81170, 23. - 26.9.2008, Darmstadt

Schrape, S., Kühhorn, A., Nipkau, J., Beirow, B.
Application of Aeroelastic Methods in Compressor Cascade Configurations Using Partitioned Code Coupling
ASME Pressure Vessels & Piping Conference, 27. - 31.7.2008, Chicago 

Springmann, M., Kühhorn, A.
Coupled thermal-multiphase flow analysis in quenching processes for residual stress optimization in compressor and turbine disks
ASME Pressure Vessels & Piping Conference, 27. - 31.7.2008, Chicago

Springmann, M., Schlums, H. , Kühhorn, A.
Numerical simulation of quenching processes for residual stress optimization in compressor and turbine disks
Tagungsbeitrag: Multiphase Flows, Simulation, Experiment and Application, Dresden, 24.-26. Juni 2008

Kober, M., Kühhorn, A., Klauke, T., Lenk, O.
Topology-Optimized Intermediate Casing of Aero Engine and Comparative Evaluation of Titanium and Composite Architecture in Terms of Load Capacity and Weight Reduction
Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50644, 9. - 13. Juni 2008, Berlin

Beirow, B., Kühhorn, A., Schrape, S.
A Discrete model to consider the influence of the air flow on blade vibrations of an intergral blisk compressor rotor
Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50613, 9. - 13. Juni 2008, Berlin

Klauke, T., Kühhorn, A., Beirow, B., Parchem, R.
Blade Vibration Phenomena of HPC Bliscs Considering Manufacturing Effects and Strain Gauge Application
Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50683, 9. - 13. Juni 2008, Berlin

Johann, E., Mueck, B., Nipkau, J.
Experimental and Numerical Flutter investigation of the 1st Stage Rotor in 4-Stage High Speed Compressor
Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Paper GT2008-50698, 9. - 13. Juni 2008, Berlin

Nipkau, J., Schrape, S., Beirow, B., Kühhorn, A.
Bestimmung aeroelastischer Parameter einer Hochdruckverdichter Stufe mit Hilfe Fluid-Struktur gekoppelter Berechnungen
NAFEMS MAGAZIN, April 2008 - Nr. 1/2008, NAFEMS Kontakt DACH & Nordic, 2008

Nipkau, J., Kühhorn, A., Schrape, S.
Determination of Aeroelastic Parameters of a High-Pressure-Compressor Stage using Fluid-Structure Interaction Calculations
Proceedings of 5. NAFEMS CFD-Seminar: "Simulation komplexer Strömungsvorgänge - Anwendungen und Trends", 10. - 11.3.2008, Wiesbaden, ISBN 978-1-874376-33-0

Nipkau, J., Kühhorn, A., Schrape, S.
Application of Fluid-Structure-Coupling for the Determination of Aeroelastic Parameters of a High-Pressure-Compressor-Blisk-Stage
Proceedings of 9th MpCCI User Forum, 19. - 20.2.2008, Sankt Augustin, ISNN 1860-6296 

Strehlau, U., Kühhorn, A.
Research of higher modes E3E/1 stage 1 demonstrator blisk
Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007

Schrape, S., Kühhorn, A., Nipkau, J.
Determination of Aerodynamic Damping of Axial-Compressor-Blades using Fluid-Structure-Interaction Methods
Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 

Springmann, M., Schlums, H., Kühhorn, A.
Development of a new Nickel-base Alloy 718Plus for Compressor and Turbine disks
Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 

Beirow, B., Kühhorn, A., Schrape, S.
Influence of Air Flow on Blisk Vibration Behaviour - an EBM-Based Approach
Workshop Advanced Simulation in Turbines and Power Generation, Cottbus, 28.-29. November 2007 

Kober, M., Kühhorn, A., Klauke, T.
Auslegung einer Flanschverbindung aus faserverstärktem Kunststoff durch Optimierung der Faserorientierungen und Schichtdicken mit Hilfe von Altair HyperStudy unter Verwendung eines Wirkebenenbruchkriteriums als Nebenbedingung
2. HyperWorks Users Meeting für Hochschulen, Böblingen, 28. November 2007 

Schrape, S., Kühhorn, A., Nipkau, J.
Determination of Aerodynamic Damping of Axial-Compressor-Blades Using A Bidirectional Fluid-Structure-Simulation
Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-027, Berlin, 10.-13.09.2007

Klauke, T., Kühhorn, A., Beirow, B.
Blade Mistuning Induced Blisk Vibration
Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-215, Berlin, 10.-13.09.2007

Beirow, B., Kühhorn, A., Schrape, S.
Influence of Air Flow on Blisk Vibration Behaviour
Deutscher Luft- und Raumfahrtkongress 2007 / CEAS 2007, Paper CEAS-2007-058, Berlin, 10.-13.09.2007

Beirow, B., Kühhorn, A., Schrape, S.
Blisk Vibration Phenomena in Consideration of Fluid Structure Interaction
Proc. of 11th Int. NAFEMS World Congress, Vancouver, 22.-25.05. 2007

Schrape, S., Kühhorn, A., Golze, M.
FSI of a Simplified Aero Engine Compressor Cascade Configuration
GAMM-Proceedings in Applied Mathematics and Mechanics 6, 457 - 458 (2006) / DOI 10.1002/pamm.200610209

Springmann, M., Scherzer, M., Kuna, M., Kühhorn, A.
Numerical simulation of localization phenomena in the frame of damage parameter identification
NAFEMS Seminar: Materials Modeling, Niedernhausen, 05.-06.12.2006, ISBN 1-874376-19-0

Beirow, B., Kühhorn, A., R., Klauke, T.
Lokalisierungsphänomen bei Hochdruckverdichterschaufelscheiben
VDI-Schwingungstagung Schwingungen in Antrieben, Fulda, VDI-Berichte Nr. 1968, 2006. ISBN 3-18-091968-X

Kober, M., Klauke, T., Kühhorn, A., Lenk, O.
Einbindung eines modernen Wirkebenenbruchkriteriums für faserverstärkte Kunststoffe in eine Parameteroptimierung mit Altair HyperStudy
1. HyperWorks Users Meeting für Hochschulen, Böblingen, 28. November 2006

Kühhorn, A.
FLUG-TRIEBWERKSTECHNIK - Inovative Studienrichtung an der BTU Cottbus unter Beteiligung von RRD, MTU und DLR
Deutscher Luft- und Raumfahrtkongress 2006, Beitrag DGLR-2006-128, Band I+II, Braunschweig, 06.-09.11.2006. ISSN 0700-4083

Kühhorn, A., Beirow, B., Parchem, R., Klauke, T.
Schaufelschwingungen bei realen Verdichter-Integralrädern (BLISK)
Deutscher Luft- und Raumfahrtkongress 2006, Beitrag DGLR-2006-211, Band I+II, Braunschweig, 06.-09.11.2006. ISSN 0700-4083

Springmann, M., Filipiak, A., Kühhorn, A.
Automatische Generierung eines vereinfachten Triebwerkmodells
18. Deutschsprachige ABAQUS-Benutzerkonferenz, Erfurt, 18.-19. September 2006

Schrape, S., Kühhorn, A., Golze, M.
Simulation fluidgedämpfter Strukturschwingungen mittels partitioniertem Kopplungsansatz via MpCCI
NAFEMS MAGAZIN, Juli 2006 - Nr. 2/2006, NAFEMS Kontakt DACH & Nordic, 2006

Kuna, M., Springmann, M.
Determination of ductile damage parameters by local deformation fields
Proceedings of the 16th Eurpean Conference of Fracture, Alexandroupolis, Greece, 03. - 07.07.2006

Beirow, B.
Secure Power for Jet Engines
Polytec LM Info - Optical Measurement Magazine, Issue 2 / 2006

Schrape, S., Kühhorn, A., Golze, M.
Simulation fluidgedämpfter Strukturschwingungen durch partitionierte Fluid-Struktur-Kopplung mittels MpCCI
Tagungsband des 3. NAFEMS CFD-Seminar: Simulation gekoppelter Strömungsvorgänge (Multifield FSI), Wiesbaden, 08. - 09. Mai 2006 

Kühhorn, A., Beirow, B., Klauke, T.
Theoretische und experimentelle Untersuchungen von Schaufelschwingungen bei Verdichterintegralrädern
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, Heft 19, 2006. ISSN 0947-6989

Schrape, S., Kühhorn, A.
FSI of a Simplified Aero Engine Compressor Cascade Configuration
GAMM Annual Meeting, March 27-31, Berlin, 2006

Schrape, S., Kühhorn, A., Golze, M.
Simulation of fluid damped structural vibrations
Proceedings of the 7th MpCCI User Forum, February 21-22, Schloss Birlinghoven, Sankt Augustin, Germany, ISSN 1860-6296, 2006

Springmann, M., Kuna, M.
Determination of ductile damage parameters by local deformation fields: Measurement and Simulation
Archive of Applied Mechanics, ISSN: 0939-1533 (Paper) 1432-0681 (Online), 2006

Schrodt, M., Benderoth, G., Kühhorn, A., Silber, G.
Hyperelastic Description of Polymer Soft Foams at Finite Deformations
Technische Mechanik, Band 25, Heft 3-4, (2005), 162-173

Schrape, S., Knöpke, M., Kühhorn, A., Hugler, D., Beirow, B., Golze, M.
Simulation fluidgedämpfter Strukturschwingungen mittels partitionierter Fluid-Struktur-Kopplung
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 9. Jahrgang, Heft 18, 2005, ISSN 0947-6989

Schrape, S., Kühhorn, A., Golze, M., Knöpke, M., Voigt, C., Beirow, B.
Fluid-Structure-Interaction of a Simplified Aero Engine Compressor Blade in an Airflow Channel
1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum, 05.-07. Oktober 2005

Kober, M.
Application of different optimization methods on an aero engine component
1st GACM Colloquium for Young Scientists on Computational Mechanics, Bochum, 05.-07. Oktober 2005

Klauke, T., Kühhorn, A., Beirow, B.
Experimental and numerical investigations of blade mistuning and strain gauge application effects in aero engine development
The 12th Blade Mechanics Seminar, ABB Turbo Systems Ltd., Thermal Machinery Laboratory, Baden/Switzerland, 29. September 2005

Studener, J., Kühhorn, A.
Thermomechanische Simulation des Annealprozesses von großen Siliziumwafern
17. Deutschsprachige ABAQUS-Benutzerkonferenz, Nürnberg, 19.-20. September 2005

Müller, T., Wahlich, R., Krottenthaler, P., Studener, J., Kühhorn, A., v. Ammon, W.
Modeling and experimental verification of the 300mm Ar Anneal Process
Material Science and Engineering B 124-125 (2005) 235-240

Beirow, B., Kühhorn, A., Golze, M., Klauke, T., Parchem, R.
Experimental and Numerical Investigations of High Pressure Compressor Blades Vibration Behaviour Considering Mistuning
10th International NAFEMS World Congress, 17.-20.05.2005, Malta, ISBN 1 174 376 03 4

Chmielewski, T., Gorski, P., Beirow, B., Kretzschmar, J.
Theoretical and Experimental Free Vibrations of Tall Industry Chimney with Flexibility of Soil
Engeneering Structures 27(2005) 25 - 34. ISSN 0141-0296

Kühhorn, A.
Möglichkeiten zur Beherschung von Schwingungsproblemen am Beispiel einer Verdichterstufe
Innovationsforum Flugtriebwerkstechnik in Brandenburg, 07.-08.12.2004, Cottbus

Kühhorn, A., Beirow, B., Klauke, T., Golze, M.
Simulation der Mistuningeffekte von Hochdruckverdichter-Schaufelscheiben zur Bestimmung kritischer Schwingungen in Flugtriebwerken
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 8. Jahrgang, Heft 17, 2004, ISSN 0947-6989

Beirow, B., Kühhorn, A., Golze, M., Klauke, T.
Experimentelle Untersuchungen des strukturdynamischen Verhaltens von Hochdruckverdichterschaufelscheiben in Integralbauweise (Blisks) mittels Laser-Doppler-Vibrometrie
Deutscher Luft und Raumfahrt-Kongress 2004, Dresden, 20.-23. September 2004

Klauke, T., Kühhorn, A., Beirow, B., Golze, M., Parchem, R., Pianka, C., Eryilki, C.
Numerische Untersuchung des Schwingungsverhaltens von Hochdruckverdichter-Blisks mit fertigungsbedingten Abweichungen
Deutscher Luft und Raumfahrt-Kongress 2004, Dresden, 20.-23. September 2004

Kühhorn, A., Golze, M.
Thickness flexible sandwich theory for the common description of global and local effects
International Journal of Solids and Structures 41 (2004) 5425-5446

Beirow, B., Kühhorn, A., Golze, M., Klauke, T.
Strukturdynamische Untersuchungen an Hochdruckverdichterschaufelscheiben unter Berücksichtigung von Mistunigeffekten
VDI-Schwingungstagung, Wiesloch, 25.-26.05.2004, VDI-Berichte Nr. 1825, VDI-Verlag, Düsseldorf, 2004

Osterrieder, P., Beirow, B.
Advanced dynamic methods for structural evaluation of TV towers
Proceedings of the Centre of Structural Integrity, Opole, 2003, ISSN 1429-1525

Beirow, B., Kühhorn, A., Golze, M., Parchem, R., Johann, E.
Experimentelle und numerische Untersuchungen hinsichtlich einer Festigkeitsauslegungsoptimierung von Hochdruckverdichter-Schaufelscheiben unter besondere Berücksichtigung von Misstuningeffekten
Deutscher Luft und Raumfahrt-Kongress 2003, München, 17.-20. November 2003

Klauke, T., Kühhorn, A., Golze, M., Villwock, J., Lenk, O.
Finite-Elemente Anwendung neuerer Faserverbund-Bruchkriterien und deren Verifizierung mittels CFK-Bauteilprüfung
Deutscher Luft und Raumfahrt-Kongress 2003, München, 17.-20. November 2003

Kühhorn, A., Klauke, T., Golze, M.
Simulation und Verifikation der sukzessiven Bruchabfolge eines CFK-Bauteils mittels neuartiger Bruchkriterien
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 7. Jahrgang, Heft 16, 2003, ISSN 0947-6989

Kühhorn, A., Beirow, B., Studener, J., Osterrieder, P., During, S.
Messtechnische Beanspruchungsuntersuchungen beim Transport von Glasröhrenkollektoren
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 7. Jahrgang, Heft 16, 2003, ISSN 0947-6989

Studener, J., Kühhorn, A.
FE-Simulation des thermischen Aufheizvorganges eines Silizium-Wafers im RTA (Rapid Thermal Anneal)
15. Deutschsprachige ABAQUS-Benutzerkonferenz, Fulda, 22.-23. September 2003

Kühhorn, A., Beirow, B.
Schwingungsreduzierung an der Antriebseinheit eines Ultraleichtflugzeuges
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 6. Jahrgang, Heft 14, 2002, ISSN 0947-6989

Kühhorn, A., Beirow, B., Golze, M., Studener, J.
Strukturmechanische Analyse einer Triebwerksverdichter-Schaufelscheibe
Forum der Forschung - Wissenschaftsmagazin der BTU Cottbus, 6. Jahrgang, Heft 14, 2002, ISSN 0947-6989

Chmielewski, T., Górski, P., Beirow, B., Kretschmar, J.
Comparision of theoretical and experimental free vibrations of high industrial chimney interacting with soil
Proc. XL VIII Konferencja Naukowa Problemy Naukowo - Badawcze, Krynica, 2002, ISBN 83-7125-091-6

Chmielewski, T., Górski, P., Beirow, B., Kretschmar, J.
Porónanie teoretycznej I doświadczalnej analizy drgań własnych wysokiego komina prezemsłowego z uwzględnieniem podatności podłoża gruntowego
Inżynieria Budownictwo 9/2002, pp. 510-512, ISSN 0021-0315

Beirow, B., Kühhorn, A.
Schwingungsreduzierung an der Antriebseinheit eines Ultraleichtflugzeuges
Deutscher Luft- u. Raumfahrtkongress Stuttgart, 2002. DGLR-Jahrbuch 2002, Band II, S. 1237-1242, DGLR-2002-003

Beirow, B., Kühhorn, A., Osterrieder, P.
Windinduzierte Schwingungserregung von Fernmeldetürmen
VDI-Berichte 1682, VDI-Verlag Düsseldorf, 2002. ISBN 3-18-091682-6

Kühhorn, A., Golze, M.
Thickness flexible theory with generalized core warping for plane sandwich-structures
Euromech Colloquium 444 - Critical Review of the Theories of Plates and Shells and New Applications, Bremen, September 22-25, 2002

Golze, M., Kühhorn, A.
CFK-/GFK - Auslegung am Beispiel eines Modellflügels
14. Deutschsprachiges ABAQUS Anwendertreffen, Wiesbaden, 23. - 24. September 2002

Studener, J., Kühhorn, A.
FE - Untersuchungen zum dynamischen Verhalten eine integralen Verdichterschaufelscheibe neuer Generation
14. Deutschsprachiges ABAQUS Anwendertreffen, Wiesbaden, 23. - 24. September 2002

Kühhorn, A., Golze, M.
An Improved Sandwich Theory for a Better Prediction of the Wrinkling Phenomenon
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria, Editors: Mang, H.A.; Rammerstorfer, F.G.; Eberhardsteiner, J., Publisher: Vienna University of Technology, Austria, ISBN 3-9501554-0-6,
http://wccm.tuwien.ac.at/publications/Papers/fp80058.pdf

Beirow, B., Osterrieder, P., Kühhorn, A.
Stochastisches Konzept für die Berechnung von Stahlschornsteinen infolge wirbelerregter Querschwingungen
Berichte der Fachtagung Baustatik/Baupraxis 8, D. Dinkler (Herausgeber), Balkema, 2001 (ISBN: 3-926031-95-6)

Beirow, B., Osterrieder, P.
Dynamic Investigations of TV Towers
Proceedings of the SEMC-Conference Cape Town, Zingoni (ed.), Elsevier, 2001 (ISBN: 0-08-043948-9)

Kretzschmar, J., Beirow, B.
Dynamic Diagnostic of Timber Structures Supported by Neural Networks
Proc. Of 2nd Joint Workshop on Neural Networks in Civil Engineering, Cottbus, 26-28 März, 2000

Beirow, B.
Application of Neural Networks in Structural Dynamics
Joint Workshop on Neural Networks in Civil Engineering, Delft/NL, 12-13 April, 1999

Osterrieder, P., Beirow, B.
Monitoring of Transmission Towers
Structural Dynamics-EURODYN `99, Frýba & Náprstek (eds), Balkema, Rotterdam, 1999 (ISBN 90 5809 056 6)

Osterrieder, P., Beirow, B.
Überwachung von Fernseh- und Fernmeldetürmen
Baustatik-Baupraxis 7, Meskouris(Hrsg.), Balkema, Rotterdam, 1999 (ISBN 90 5809 044 2)

Beirow, B.
Nutzung Neuronaler Netze zur Lösung dynamischer Problemstellungen bei turmartigen Bauwerken
Beiträge zum 3. Cottbuser Workshop "Aspekte Neuronalen Lernens" (CoWAN `98), Skaker Verlag, Aachen, 1998 (ISBN 3-8265-4544-3)

Schroth, G., Osterrieder, P., Beirow, B.
Control and Inspection of Transmission Towers Using Dynamic Methods
Proc. XLIII Konferencja Naukowa Problemy Naukowo - Badawcze Budownictwa, Krynica, 1997 (ISBN 83-87230-00-6)

Schroth, G. ,Osterrieder, P., Beirow, B.
Dynamic Investigations of Bell Tower Consisting of a Reinforced Concrete Frame with Masonry
Proc. Structural Faults + Repair, Engineering Technics Press, Edinburgh, 1997 (ISBN 0 947644 35 9)

Schroth, G., Osterrieder, P., Beirow, B., During, S.
Dynamic Investigations of Church Bell Tower
Proc. XLII Konferencja Naukowa Problemy Naukowo - Badawcze Budownictwa, Krynica, 1996

Beirow, B., Schroth, G., Osterrieder, P.
Dynamic Diagnostic of Transmission Towers
Proc. Second International Conference 'Structural Dynamics Modelling', Bell and Bain Ltd. Glasgow/Cumbria, 1996 (ISBN 0 874376 20 4)

Kühhorn, A.
Experimentelle Schwingungsanalyse am Beispiel einer PKW - Hinterachse
Fachtagung: Dynamische Probleme im Maschinen- und Anlagenbau, HTWS, Zittau / Görlitz, 1996

Kühhorn, A.
Anwendungsmöglichkeiten und Grenzen der Finite - Element - Methode (FEM) zur Konstruktionsberechnung und -optimierung
Tagung zur FEM / CAD - Laboreinweihung, FHL Senftenberg, 1995

Kühhorn, A.
Auslegung eines kohlefaserverstärkten, gefederten Freizeitrades
Tagungsband zur Schweißfachtagung,DVS, Bezirksverband Cottbus, 1993

Kühhorn, A.
Nichtlineare Theorie und finites Element für Sandwichtragwerke zur Beschreibung des globalen und lokalen Versagens
ZAMM - Zeitschrift für angewandte Mathematik und Mechanik 73, 1993

Kühhorn, A., Schoop, H.
A nonlinear theory for sandwich shells including the wrinkling phenomenon
Archiv of Applied Mechanics 62, Springer-Verlag, 1992

Kühhorn, A.
Modalsynthese an Flugtriebwerken
Seminar über Fragen der Mechanik am Institut und Lehrstuhl für Mechanik, TU München, 1987