CAD Workshop: 3D Modeling with Autodesk Fusion 360 (Part II) 2.11. IN GERMAN ONLY

CAD Workshop: 3D Modeling with Autodesk Fusion 360 (Part II)
Thursday, Nov. 2 (5-8 p.m.)
COLab* in Startblock B2, Cottbus
free of charge
! the workshop is being held in german !

How does the workshop work?

Also in this workshop we will construct, design and draft with Autodesk Fusion 360. We will deepen the knowledge from the first part and create more complicated shapes such as solids, webs and ribs. In addition, we will learn how to work with parameter tables as well as many valuable tips and tricks for Fusion 360.

Who is this workshop for?

This workshop is primarily suitable for those who have already gained experience in 3D printing or have attended one of our basic course workshops. Children may only attend if accompanied by an adult and must be at least 12 years old. We ask families to register together for a spot and thus create a 3D printed object together.

What do I need to bring?

Please bring a laptop with Autodesk Fusion360 software. You can find tips on how to install it for free here. If you don't have a laptop available, you can reserve a workshop computer. But be aware, there are only a limited number of laptops available. Just send an email to colab(at)b-tu.de.

How can I register?

The number of participants is limited to 8 persons. Please register here. If you change your mind, please deregister on the same page at least one week before. In this way, interested persons from the waiting list can still participate and the limited places will not remain unfilled. Families are asked to register together for one place:

REGISTRATION

Notes

There will be no food or beverage service on site.

*The CreativeOpenLab (COLab) is a structural change project of the BTU Cottbus-Senftenberg. All information about the project and our events can be found here:

www.colab-cottbus.de