×
Target groups Quicklinks
{11¯01} tension twins and {11¯01}-{22¯01}/{22¯01}-{11¯01} double twins in the D019 ordered hexagonal α2-Ti3Al phase Author(s) Song, Lin, Appel, Fritz, Liu, Wenhao, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2023 Source Acta Materialia Volume 260 Issue/Journal number 3 DOI https://doi.org/10.1016/j.actamat.2023.119335 High-oxygen MIM Ti-6Al-7Nb: Microstructure, tensile and fatigue properties Author(s) Amherd Hidalgo, Alexandra, Ebel, Thomas, Frykholm, Robert, Carreño-Morelli, Efraín, Pyczak, Florian Type Scientific Article ref. Year of publication 2023 Source Materials Today Communication Volume Vol. 34 ISSN 2352-4928 DOI https://doi.org/10.1016/j.mtcomm.2022.104982 Stacking fault formation in perovskite Ti3AlC carbides in a TiAl based alloy during creep at 800°C Author(s) Wang, Li, Liang, Xiaopeng, Liu, Bin, Oehring, Michael, Paul, Jonathan David Heaton, Liu, Jie, Song, Min, Pyczak, Florian, Liu, Yong Type Scientific Article ref. Year of publication 2023 Source Scripta Materialia Volume Vol. 222 ISSN 1872-8456 1359-6462 DOI https://doi.org/10.1016/j.scriptamat.2022.115034 Microstructure formation during laser powder bed fusion of Ti-22Al-25Nb with low and high pre-heating temperatures Author(s) Gussone, Joachim, Rackel, Marcus W., Tumminello, Silvana, Barriobero-Vila, Pere, Kreps, Frederic, Kelm, Klemens, Stark, Andreas, Schell, Norbert, Pyczak, Florian, Haubrich, Jan, Requena, Guillermo Type Scientific Article ref. Year of publication 2023 Source Materials and Design Volume Vol. 232 ISSN 0264-1275 DOI https://doi.org/10.1016/j.matdes.2023.112154 In-situ synchrotron high energy X-ray diffraction study on the internal strain evolution of D019-α2 phase during high-temperature compression and subsequent annealing in a TiAl alloy Author(s) Liu, Xu, Stark, Andreas, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2023 Source Journal of Materials Science and Technology, S. 212 - 222 Volume Vol. 163 ISSN 1941-1162 1005-0302 DOI https://doi.org/10.1016/j.jmst.2023.04.027 Microstructure of an additively manufactured Ti-Ta-Al alloy using novel pre-alloyed powder feedstock material Author(s) Lauhoff, Christian, Arold, Tizian, Bolender, Artjom, Rackel, Marcus W., Pyczak, Florian, Weinmann, Markus, Xu, Wenzheng, Molotnikov, Andrey, Niendorf, Thomas Type Scientific Article ref. Year of publication 2023 Source Additive Manufacturing Letters Volume Vol. 6 ISSN 2772-3690 DOI https://doi.org/10.1016/j.addlet.2023.100144 Impact of microstructure on elastic properties in the alloy Ti-42Al-8.5 Nb Author(s) Gabrisch, Heike, Janovská, Michaela, Rackel, Marcus W., Pyczak, Florian, Stark, Andreas Type Scientific Article ref. Year of publication 2023 Source Journal of Alloys and Compounds Volume Vol. 932 ISSN 1873-4669 0925-8388 DOI https://doi.org/10.1016/j.jallcom.2022.167578 Out-of-Equilibrium Formation of Ni3Ti η-Phase in Inconel X-750 Produced via Laser Powder Bed Fusion and Spark Plasma Sintering Author(s) Volpato, G. M., Pereira, A. S. P., Lemos, G., Schmitt, M., Pyczak, Florian, Tetzlaff, Ulrich, Fredel, Márcio C. Type Scientific Article ref. Year of publication 2023 Source Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, S. 1924 - 1936 Volume 54 Issue/Journal number 5 ISSN 1073-5623 DOI https://doi.org/10.1007/s11661-022-06946-1 Stability and Physical Properties of the L12-γ′ Phase in the CoNiAlTi-System Author(s) Pyczak, Florian, Liang, Zhida, Neumeier, Steffen, Rao, Ziyuan Type Scientific Article ref. Year of publication 2023 Source Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, S. 1661 - 1670 Volume 54 Issue/Journal number 5 ISSN 1073-5623 DOI https://doi.org/10.1007/s11661-022-06949-y Assessment of the capability of Zr, Y, La, Gd, Dy, C, and Si to enhance the creep strength of gamma titanium aluminide alloys based on their effect on flow stress and thermal activation parameters Author(s) Fröbel, Ulrich, Stark, Andreas, Paul, Jonathan, Pyczak, Florian Type Scientific Article ref. Year of publication 2023 Source Intermetallics Volume Vol. 162 ISSN 1879-0216 0966-9795 DOI https://doi.org/10.1016/j.intermet.2023.108018 In-situ synchrotron HEXRD study on the phase transformation mechanisms of the ω-related phases in a Ti4Al3Nb alloy Author(s) Guo, Xiang, Song, Lin, Liu, Xu, Stark, Andreas, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2023 Source Materials Characterization Volume Vol. 200 ISSN 1873-4189 1044-5803 DOI https://doi.org/10.1016/j.matchar.2023.112901 A New Kind of Biomedical Ti–Mn–Nb Alloy Author(s) Zhang, Haoyin, Wang, C. P., Pyczak, Florian, Ebel, Thomas, Liu, X. J. Type Scientific Article ref. Year of publication 2023 Source Physica Status Solidi. A, Applications and Materials Science Volume 220 Issue/Journal number 7 ISSN 1862-6300 DOI https://doi.org/10.1002/pssa.202200348 High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements Author(s) Liang, Zhida, Paul, Jonathan, Stark, Andreas, Bezold, Andreas, Neumeier, Steffen, Göken, Mathias, Pyczak, Florian Type Scientific Article ref. Year of publication 2022 Source Metallurgical and materials transactions. A, Physical metallurgy and materials science, S. 1620 - 1634 Volume 54 (2023) Issue/Journal number 5 ISSN 1543-1940 DOI https://doi.org/10.1007/s11661-022-06795-y Characterization of primary, secondary and tertiary {202¯1}<1¯014> successive internal twins in the D019 ordered hexagonal α2-Ti3Al phase Author(s) Song, Lin, Appel, Fritz, Pyczak, Florian, Zhanbing, He, Junpin, Lin, Tiebang, Zhang Type Scientific Article ref. Year of publication 2022 Source Acta Materialia Issue/Journal number 222 ISSN 1873-2453 DOI https://doi.org/10.1016/j.actamat.2021.117391 Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys Author(s) Li, Longjun, Wang, Li, Liang, Zhida, He, Junyang, Qiu, Jingwen, Pyczak, Florian, Song, Min Type Scientific Article ref. Year of publication 2022 Source Materials and Design Volume 224 ISSN 1873-4197 DOI https://doi.org/10.1016/j.matdes.2022.111291 CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress Author(s) Liang, Zhida, Neumeier, Steffen, Rao, Ziyuan, Göken, Mathias, Pyczak, Florian Type Scientific Article ref. Year of publication 2022 Source Materials Science and Engineering: A, Structural materials Volume 854 ISSN 1873-4936 0921-5093 DOI https://doi.org/10.1016/j.msea.2022.143798 Creep resistance improvement of a polycrystalline Ni-based superalloy via TiC particles reinforcement Author(s) Lemos, Georges, Fredel, Márcio C., Pyczak, Florian, Tetzlaff, Ulrich Type Scientific Article ref. Year of publication 2022 Source Materials Science and Engineering: A, Structural materials Volume 854 ISSN 1873-4936 0921-5093 DOI https://doi.org/10.1016/j.msea.2022.143821 Ti-Al3Ti metal-intermetallic laminate (MIL) composite with a cubic titanium trialuminide stabilized with silver: Selection of fabrication regimes, structure, and properties Author(s) Lazurenko, Daria V., Petrov, Ivan Yu, Mali, Vyacheslav I., Esikov, Maksim A., Kuzmin, R. I., Lozanov, V. V., Pyczak, Florian, Stark, Andreas, Dovzhenko, G. D., Bataev, Ivan A., Terentiev, D. S., Ruktuev, Alexey A. Type Scientific Article ref. Year of publication 2022 Source Journal of Alloys and Compounds Volume 916 ISSN 1873-4669 DOI https://doi.org/10.1016/j.jallcom.2022.165480 Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys Author(s) Haußmann, Lukas, Neumeier, Steffen, Breseler, Johannes, Keim, Simon, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2022 Source Metals Volume 12 Issue/Journal number 5 ISSN 2075-4701 DOI https://doi.org/10.3390/met12050752 In- and ex-situ study of the deformation behavior of the βo(ωo) phase in a Ti4Al3Nb alloy during high-temperature compression Author(s) Liu, Xu, Song, Lin, Liu, Tong, Stark, Andreas, Pyczak, Florian, He, Zhanbing, Lin, Junpin, Zhang, Tiebang Type Scientific Article ref. Year of publication 2022 Source Journal of Alloys and Compounds Volume 918 ISSN 0925-8388 DOI https://doi.org/10.1016/j.jallcom.2022.165626 Deformation and phase transformation behaviors of a high Nb-containing TiAl alloy compressed at intermediate temperatures Author(s) Liu, Xu, Song, Lin, Stark, Andreas, Lorenz, Uwe, He, Zhanbing, Lin, Junpin, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2022 Source Journal of Materials Science and Technology, S. 89 - 96 Volume 102 ISSN 0861-9786 DOI https://doi.org/10.1016/j.jmst.2021.06.041 Atomic site occupancy of alloying elements and Laves phase stability in γ-γ′ Co-base superalloys Author(s) Wang, Li, Kong, Yi, Oehring, Michael, Song, Min, Pyczak, Florian Type Scientific Article ref. Year of publication 2022 Source Journal of Alloys and Compounds Volume 906 ISSN 1873-4669 0925-8388 DOI https://doi.org/10.1016/j.jallcom.2022.164261 Influence of defects on damage tolerance of Metal-Injection-Molded β titanium alloys under static and dynamic loading Author(s) Peng, Xu, Ebel, Thomas, Pyczak, Florian, Willumeit-Römer, Regine, Sen, Yu Type Scientific Article ref. Year of publication 2022 Source Powder Metallurgy, S. 354 - 364 Volume 65 Issue/Journal number 5 ISSN 1743-2901 DOI https://doi.org/10.1080/00325899.2022.2069077 Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part I: Low-Temperature Phase Equilibria Between 700 and 900 °C Author(s) Distl, Benedikt, Hauschildt, Katja, Rashkova, Boryana, Pyczak, Florian, Stein, Frank Type Scientific Article ref. Year of publication 2022 Source Journal of Phase Equilibria and Diffusion, S. 355 - 381 Volume 43 Issue/Journal number 3 ISSN 1863-7345 DOI https://doi.org/10.1007/s11669-022-00963-8 Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System—Part II: High-Temperature Phase Equilibria Between 1000 and 1300 °C Author(s) Distl, Benedikt, Hauschildt, Katja, Pyczak, Florian, Stein, Frank Type Scientific Article ref. Year of publication 2022 Source Journal of Phase Equilibria and Diffusion, S. 554 - 575 Volume 43 Issue/Journal number 5 ISSN 1863-7345 DOI https://doi.org/10.1007/s11669-022-00999-w Developing sustainable FeTi alloys for hydrogen storage by recycling Author(s) Shang, Yuanyuan, Liu, Shaofei, Liang, Zhida, Pyczak, Florian, Lei, Zhifeng, Heidenreich, Tim, Schöckel, Alexander, Kai, Ji-jung, Gizer, Gökhan, Dornheim, Martin, Klassen, Thomas Type Scientific Article ref. Year of publication 2022 Source Communications Materials Volume 3 Issue/Journal number 1 ISSN 2662-4443 DOI https://doi.org/10.1038/s43246-022-00324-5 First-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys Author(s) Tang, Yingchun, Li, Wei, Li, Changle, Lu, Song, Vitos, Levente, Pyczak, Florian Type Scientific Article ref. Year of publication 2022 Source Metallurgical and materials transactions. A, Physical metallurgy and materials science, S. 1635 - 1648 Volume 54 (2023) Issue/Journal number 5 ISSN 1543-1940 DOI https://doi.org/10.1007/s11661-022-06891-z Surface Recrystallization in a Co-Based Superalloy During High Temperature Exposure Author(s) Liang, Zhida, Lilleodden, Erica, Ovri, Henry, Pyczak, Florian Type Scientific Article ref. Year of publication 2022 Source Metallurgical and materials transactions. A, Physical metallurgy and materials science, S. 4156 - 4160 Volume 53 Issue/Journal number 12 ISSN 1543-1940 DOI https://doi.org/10.1007/s11661-022-06852-6 A zone melting device for the in-situ observation of directional solidification using high-energy synchrotron X-rays Author(s) Gombola, C., Hasemann, G., Kauffmann, A., Sprenger, I., Laube, S., Schmitt, A., Gang, Florian, Bolbut, V., Oehring, Michael, Blankenburg, Malte, Schell, Norbert, Staron, Peter, Pyczak, Florian, Krüger, Manja, Heilmaier, Martin Type Scientific Article ref. Year of publication 2020 Source Review of Scientific Instruments Volume 91 Issue/Journal number 9 ISSN 0034-6748 1089-7623 Influence of the Ti/Al/Nb ratio on the structure and properties on intermetallic layers obtained on titanium by non-vacuum electron beam cladding Author(s) Lazurenko, Daria V., Laptev, Ilia S., Golkovsky, Mikhail G., Stark, Andreas, Paul, Jonathan, Bataev, Ivan A., Ruktuev, Alexey A., Song, Lin, Gollwitzer, Christian, Pyczak, Florian Type Scientific Article ref. Year of publication 2020 Source Materials Characterization Volume 163 ISSN 1044-5803 Temperature dependence of misfit in different Co–Al–W ternary alloys measured by synchrotron X-ray diffraction Author(s) Li, Yuzhi, Pyczak, Florian, Stark, Andreas, Wang, Li, Oehring, Michael, Paul, Jonathan, Lorenz, Uwe Type Scientific Article ref. Year of publication 2020 Source Journal of Alloys and Compounds Volume 819 ISSN 0925-8388 New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys Author(s) Song, Lin, Appel, Fritz, Wang, Li, Oehring, Michael, Hu, Xingguo, Stark, Andreas, He, Junyang, Lorenz, Uwe, Zhang, Tiebang, Lin, Junpin, Pyczak, Florian Type Scientific Article ref. Year of publication 2020 Source Acta Materialia, S. 575 - 586 Volume 186 ISSN 1873-2453 1359-6454 DOI https://doi.org/10.1016/j.actamat.2020.01.021 Tensile toughening of powder-injection-molded β Ti-Nb-Zr biomaterials by adjusting TiC particle distribution from aligned to dispersed pattern Author(s) Xu, Peng, Pyczak, Florian, Yan, Ma, Limberg, Wolfgang, Willumeit-Römer, Regine, Ebel, Thomas Type Scientific Article ref. Year of publication 2020 Source Applied Materials Today Volume 19 ISSN 2352-9407 DOI https://doi.org/10.1016/j.apmt.2020.100630 Impacts of yttrium on microstructure and tensile properties of biomedical β Ti-Nb-Zr fabricated by metal injection molding Author(s) Xu, Peng, Pyczak, Florian, Yang, Ma, Kong, Fantao, Ebel, Thomas Type Scientific Article ref. Year of publication 2020 Source Materials Science and Engineering: A Volume 792 ISSN 0921-5093 Microstructure and phase transformations of omega_o-Ti4Al3Nb based alloys after quenching and subsequent aging at intermediate temperatures Author(s) Song, Lin, Wang, Li, Zhang, Tiebang, Lin, Junpin, Pyczak, Florian Type Scientific Article ref. Year of publication 2020 Source Journal of Alloys and Compounds Volume 821 ISSN 0925-8388 Application of Different Diffraction Peak Profile Analysis Methods to Study the Structure Evolution of Cold-Rolled Hexagonal α-Titanium Author(s) Ivanov, Ivan V., Lazurenko, Daria V., Stark, Andreas, Pyczak, Florian, Thömmes, Alexander, Bataev, Ivan A. Type Scientific Article ref. Year of publication 2020 Source Metals and Materials International, S. 83 - 93 Volume 26 Issue/Journal number 1 ISSN 2005-4149 1598-9623 DOI https://doi.org/10.1007/s12540-019-00309-z Sintering and Creep Resistance of Powder-Metallurgy-Processed Ti-(43-47)Al-5Nb-0.2B-0.2C Author(s) Soyama, Juliano, Limberg, Wolfgang, Ebel, Thomas, Pyczak, Florian Type Scientific Article ref. Year of publication 2020 Source Advanced Engineering Materials Volume 22 Issue/Journal number 8 ISSN 1527-2648 The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys–experiment and modelling Author(s) Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2020 Source Materials and Design Volume 198 ISSN 0264-1275 Phase composition and microstructure of TiAl-Zr alloys Author(s) Kathöfer, Fabian Type image Year of publication 2019 Titanium Aluminide; Phase composition; Microstructure ISBN 978-3-948023-07-2 Amorphous Mo-Ta Oxide Nanotubes for Long-Term Stable Mo Oxide-Based Supercapacitors Author(s) Jin, Bowen, Hejazi, Seyedsina, Pyczak, Florian, Oehring, Michael, Mohajernia, Shiva, Kment, Stepan, Tomanec, Ondrej, Zboril, Radek, Nguyen, Nhat Truong, Yang, Min, Schmuki, Patrik Type Scientific Article ref. Year of publication 2019 Source ACS Applied Materials and Interfaces, S. 45665 - 45673 Volume 11 Issue/Journal number 49 ISSN 1944-8244 1944-8252 Identification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloy Author(s) Wang, Li, Song, Lin, Stark, Andreas, Liu, Yong, Oehring, Michael, Lorenz, Uwe, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Journal of Alloys and Compounds, S. 880 - 886 Volume 805 ISSN 0925-8388 Ceramic-Reinforced γ-TiAl-Based Composites: Synthesis, Structure, and Properties Author(s) Lazurenko, Daria V., Stark, Andreas, Esikov, Maksim A., Paul, Jonathan, Bataev, Ivan A., Kashimbetova, Adelya A., Mali, Vyacheslav I., Lorenz, Uwe, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Materials Volume 12 Issue/Journal number 4 ISSN 1996-1944 DOI https://doi.org/10.3390/ma12040629 A eutectic high-entropy alloy with good high-temperature strength-plasticity balance Author(s) Han, Liuliu, Xu, Xiandong, Wang, Li, Pyczak, Florian, Zhou, Rui, Liu, Yong Type Scientific Article ref. Year of publication 2019 Source Materials Research Letters, S. 460 - 466 Volume 7 Issue/Journal number 11 ISSN 2166-3831 Work hardening and recovery in fully lamellar TiAl: relative activity of deformation systems Author(s) Schnabel, Jan Eike, Bargmann, Swantje, Paul, Jonathan David Heaton, Oehring, Michael, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Philosophical Magazine, S. 148 - 180 Volume 99 Issue/Journal number 2 ISSN 1478-6435 1478-6443 The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides Author(s) Bresler, Johannes, Neumeier, Steffen, Ziener, Marco, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2019 Source Materials Science and Engineering, S. 46 - 53 Volume 744 ISSN 0921-5093 DOI https://doi.org/10.1016/j.msea.2018.11.152 The transient liquid phase bonding process of a γ-TiAl alloy with brazing solders containing Fe or Ni Author(s) Hauschildt, Katja, Stark, Andreas, Schell, Norbert, Müller, Martin, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Intermetallics, S. 48 - 58 Volume 106 ISSN 0966-9795 Influence of distinct manufacturing processes on the microstructure of ni-based metal matrix composites submitted to long thermal exposure Author(s) Lemos, Georges, Fredel, Márcio C., Pyczak, Florian, Tetzlaff, Ulrich Type Scientific Article ref. Year of publication 2019 Source Key Engineering Materials, S. 79 - 86 Volume 809 ISSN 1662-9795 DOI https://doi.org/10.4028/www.scientific.net/KEM.809.79 Site occupancy of alloying elements in the L12 structure determined by channeling enhanced microanalysis in γ/γ’ Co-9Al-9W-2X alloys Author(s) Wang, Li, Oehring, Michael, Liu, Yuzhi, Lorenz, Uwe, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Acta Materialia, S. 176 - 188 Volume 162 ISBN 1359-6454 Microstructure, phase stability and element partitioning of γ/γʹ Co-9Al-9W-2X alloys in different annealing conditions Author(s) Wang, Li, Oehring, Michael, Li, Yuzhi, Song, Lin, Liu, Yon, Stark, Andreas, Lorenz, Uwe, Pyczak, Florian Type Scientific Article ref. Year of publication 2019 Source Journal of Alloys and Compounds, S. 594 - 605 Volume 787 ISSN 0925-8388 Microstructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon addition Author(s) Song, Lin, Hu, Xingguo, Wang, Li, Stark, Andreas, Lazurenko, Daria V., Lorenz, Uwe, Lin, Junpin, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2019 Source Journal of Alloys and Compounds Volume 807 ISSN 0925-8388 DOI https://doi.org/10.1016/j.jallcom.2019.151649 Evidence for deformation twinning of the D019-α2 phase in a high Nb containing TiAl alloy Author(s) Song, Lin, Wang, Li, Oehring, Michael, Hu, Xingguo, Appel, Fritz, Pyczak, Florian, Zhang, Tiebang Type Scientific Article ref. Year of publication 2019 Source Intermetallics, S. 91 - 96 Volume 109 ISSN 0966-9795 DOI https://doi.org/10.1016/j.intermet.2019.03.014 Cold gas spraying of Ti-48Al-2Cr-2Nb intermetallic for jet engine applications Author(s) Bakan, Emine, Mauer, Georg, Sohn, Yoo Jung, Schwedt, Alexander, Rackel, Marcus W., Riedlberger, Florian, Pyczak, Florian, Peters, Jan Oke, Mecklenburg, Matthias, Gartner, Thomas Maria, Vaßen, Robert Type Scientific Article ref. Year of publication 2019 Source Surface and Coatings Technology, S. 203 - 210 Volume 371 ISSN 0257-8972 DOI https://doi.org/10.1016/j.surfcoat.2018.11.092 Effect of ternary elements on the eutectic temperature and microstructure in TiAl-x (x=Nb,Cr,Zr), MSE, Darmstadt, 2018 Author(s) Kathöfer, Fabian, Pyczak, Florian Type image Year of publication 2018 Titanium Aluminides; Material alloying; Phase Transformation; Microstructure URL https://www.mse-congress.de/program/poster-session Synthesis of metal-intermetallic laminate (MIL) composites with modified Al3Ti structure and in situ synchrotron X-ray diffraction analysis of sintering process Author(s) Lazurenko, Daria V., Bataev, Ivan A., Mali, Vyacheslav I., Jorge, J. R., Stark, Andreas, Pyczak, Florian, Ogneva, T. S., Maliutina, I. N. Type Scientific Article ref. Year of publication 2018 Source Materials and Design, S. 8 - 16 Volume 151 ISSN 0264-1275 DOI https://doi.org/10.1016/j.matdes.2018.04.038 New insights into perovskite-Ti3AlC precipitate splitting in a Ti-45Al-5Nb-0.75C alloy by transmission electron microscopy Author(s) Wang, Li, Oehring, Michael, Lorenz, Uwe, Stark, Andreas, Pyczak, Florian Type Scientific Article ref. Year of publication 2018 Source Intermetallics, S. 70 - 76 Volume 100 ISSN 0966-9795 DOI https://doi.org/10.1016/j.intermet.2018.06.006 The grain boundary pinning effect of the µ phase in an advanced polycrystalline γ/γʹ Co-base superalloy Author(s) Freund, Lisa P., Stark, Andreas, Pyczak, Florian, Schell, Norbert, Göken, Mathias, Neumeier, Steffen Type Scientific Article ref. Year of publication 2018 Source Journal of Alloys and Compounds, S. 333 - 342 Volume 753 ISSN 0925-8388 DOI https://doi.org/10.1016/j.jallcom.2018.04.204 Rafting of γ′ precipitates in a Co-9Al-9W superalloy during compressive creep Author(s) Wang, Li, Pyczak, Florian, Paul, Jonathan, Oehring, Michael, Lorenz, Uwe, Yao, Zekun, Ning, Yongquan Type Scientific Article ref. Year of publication 2018 Source Materials Science and Engineering, S. 43 - 48 Volume 719 ISSN 0921-5093 DOI https://doi.org/10.1016/j.msea.2018.02.017 Influence of alloying elements in fatigue properties of α/β titanium alloys Author(s) Amherd Hidalgo, Alexandra, Limberg, Wolfgang, Ebel, Thomas, Frykholm, Robert, Carreno-Morelli, Efrain, Pyczak, Florian Type Scientific Article ref. Year of publication 2018 Source Key Engineering Materials, S. 80 - 86 Volume 770 ISSN 1662-9795 1013-9826 DOI https://doi.org/10.4028/www.scientific.net/KEM.770.80 The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density Author(s) Freund, Lisa P., Stark, Andreas, Kirchmayer, Andreas, Schell, Norbert, Pyczak, Florian, Göken, Mathias, Neumeier, Steffen Type Scientific Article ref. Year of publication 2018 Source Metallurgical and Materials Transactions A, S. 4070 - 4078 Volume 49 Issue/Journal number 9 ISSN 1543-1940 1073-5623 DOI https://doi.org/10.1007/s11661-018-4757-2 Surface topography and cytocompatibility of metal injection molded Ti–22Nb alloy as biomaterial Author(s) Zhao, Dapeng, Chen, Yu-kai, Chang, Keke, Ebel, Thomas, Luthringer, Bérengère, Willumeit-Römer, Regine, Pyczak, Florian Type Scientific Article ref. Year of publication 2018 Source Transactions of Nonferrous Metals Society of China, S. 1342 - 1350 Volume 28 Issue/Journal number 7 ISSN 1003-6326 DOI https://doi.org/10.1016/S1003-6326(18)64772-7 Influence of alloying additions on L1₂ decomposition in γ-γʹ Co-9Al-9W-2X quaternary alloys Author(s) Wang, Li, Oehring, Michael, Lorenz, Uwe, Yang, Junjie, Pyczak, Florian Type Scientific Article ref. Year of publication 2018 Source Scripta Materialia, S. 176 - 181 Volume 154 ISSN 1359-6462 Oxidation behaviors of Co-Al-W-0.1B superalloys in a long-term isothermal exposure at 900 °C Author(s) Li, Yuzhi, Pyczak, Florian, Paul, Jonathan, Yao, Zekun Type Scientific Article ref. Year of publication 2018 Source Journal of Materials Science and Technology, S. 2212 - 2217 Volume 34 Issue/Journal number 11 ISSN 1005-0302 DOI https://doi.org/10.1016/j.jmst.2018.03.013 Carbides evolution of Ti-22Nb based alloys prepared by Metal Injection Molding and the Reduction Methods Author(s) Luo, Xia, Ebel, Thomas, Pyczak, Florian, Limberg, Wolfgang, Lin, Yuanhua Type Scientific Article ref. Year of publication 2017 Source Materials Letters, S. 295 - 298 Volume 193 ISSN 1873-4979 0167-577X Influence of α-Phase Field Heat Treatment on the Tensile and Primary Creep Resistance of a Powder Metallurgical Processed Ti-45Al-5Nb-0.2B-0.2C Titanium Aluminide Alloy Author(s) Guimaraes, R. P. M., Soyama, Juliano, Ebel, Thomas, Fredel, Márcio C., Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source Materials Science Forum, S. 418 - 423 Volume 899 ISSN 0255-5476 Influence of alloy composition and thermal history on carbide precipitation in γ-based TiAl alloys Author(s) Wang, Li, Lorenz, Uwe, Münch, Mathias, Stark, Andreas, Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source Intermetallics, S. 32 - 39 Volume 89 ISSN 0966-9795 Powder Metallurgy Strategies to Improve Properties and Processing of Titanium Alloys: A Review Author(s) Amherd Hidalgo, Alexandra, Frykholm, Robert, Ebel, Thomas, Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source Advanced Engineering Materials Volume 19 Issue/Journal number 6 ISSN 1527-2648 Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys Author(s) Wang, Li, Zenk, Carolin, Stark, Andreas, Felfer, Peter, Gabrisch, Heike, Göken, Mathias, Lorenz, Uwe, Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source Acta Materialia, S. 36 - 44 Issue/Journal number 137 ISSN 1359-6454 Thermal Stability of gamma' phase in long-term aged Co-Al-W alloys Author(s) Li, Yuzhi, Pyczak, Florian, Oehring, Michael, Wang, Li, Paul, Jonathan, Lorenz, Uwe, Yao, Zekun Type Scientific Article ref. Year of publication 2017 Source Journal of Alloys and Compounds, S. 266 - 276 Volume 729 ISSN 0925-8388 Microstructure evolution in L12 hardened Co-base superalloys during creep Author(s) Li, Yuzhi, Pyczak, Florian, Paul, Jonathan, Oehring, Michael, Lorenz, Uwe, Yao, Zekun Type Scientific Article ref. Year of publication 2017 Source Journal of Materials Research, S. 4522 - 4530 Volume 32 Issue/Journal number 24 ISSN 2044-5326 0884-2914 Depth resolved near-surface residual stresses in γ-based TiAl before and after high-temperature exposure Author(s) Paul, Jonathan, Oehring, Michael, Appel, Fritz, Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source Intermetallics, S. 103 - 111 Volume 84 ISSN 0966-9795 Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy Author(s) Iqbal, Farasat, Pyczak, Florian, Neumeier, Steffen, Göken, Mathias Type Scientific Article ref. Year of publication 2017 Source Materials Science and Engineering : A, Structural materials, S. 11 - 16 Volume 689 ISSN 0921-5093 1873-4936 Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution Author(s) Kim, Young Min, Mendis, Chamini, Sasask, Taisuke, Letzig, Dietmar, Pyczak, Florian, Hono, Kazuhiro, Yi, Sangbong Type Scientific Article ref. Year of publication 2017 Source Scripta Materialia, S. 41 - 45 Volume 136 ISSN 1359-6462 Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Molding Author(s) Soyama, Juliano, Oehring, Michael, Ebel, Thomas, Kainer, Karl Ulrich, Pyczak, Florian Type Scientific Article ref. Year of publication 2017 Source JOM : the journal of the Minerals, Metals & Materials Society, S. 676 - 682 Volume 69 Issue/Journal number 4 ISSN 1047-4838 1543-1851 Morphology and stability of orthorhombic and hexagonal phases in a lamellar γ-Ti-42Al-8.5Nb alloy-A transmission electron microscopy study Author(s) Gabrisch, Heike, Lorenz, Uwe, Pyczak, Florian, Rackel, Marcus W., Stark, Andreas Type Scientific Article ref. Year of publication 2017 Source Acta Materialia, S. 304 - 313 Volume 135 ISSN 1359-6454 Processing of Al-12Si – TNM composites by selective laser melting and evaluation of compressive and wear properties Author(s) Prashanth, Konda G., Scudino, Sergio, Chaubey, Anil K., Löber, Lukas, Wang, Pei, Attar, Hooyar, Schimansky, Frank-Peter, Pyczak, Florian, Eckert, Jürgen Type Scientific Article ref. Year of publication 2016 Source Journal of Materials Research, S. 55 - 65 Volume 31 Issue/Journal number 1 ISSN 0884-2914 2044-5326 DOI https://doi.org/10.1557/jmr.2015.326 Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures Author(s) Kolb, M., Wheeler, Jeffrey M., Mathur, H. N., Neumeier, Steffen, Korte-Kerzel, Sandra, Pyczak, Florian, Michler, Johann, Göken, Mathias Type Scientific Article ref. Year of publication 2016 Source Materials Science and Engineering A, S. 135 - 140 Volume 665 ISSN 0921-5093 DOI https://doi.org/10.1016/j.msea.2016.04.026 Microstructure of Ti-45Al-5Nb and Ti-45Al-10Nb powders Author(s) Laipple, Daniel, Stark, Andreas, Schimansky, Frank-Peter, Schwebke, Bernd, Pyczak, Florian, Schreyer, Andreas Type Scientific Article ref. Year of publication 2016 Source Key Engineering Materials, S. 214 - 222 Volume 704 ISSN 1662-9795 DOI https://doi.org/10.4028/www.scientific.net/KEM.704.214 Influence of oxygen on the fatigue behaviour of Ti-6Al-7Nb alloy Author(s) Amherd Hidalgo, Alexandra, Ebel, Thomas, Limberg, Wolfgang, Pyczak, Florian Type Scientific Article ref. Year of publication 2016 Source Key Engineering Materials, S. 44 - 52 Volume 704 ISSN 1662-9795 DOI https://doi.org/10.4028/www.scientific.net/KEM.704.44 In situ analysis of the forging process of a novel γ-TiAl alloy using synchrotron radiation Author(s) Tchouaha Tankoua, Aristide, Stark, Andreas, Rackel, Marcus W., Pyczak, Florian, Hehl, Axel von Type Scientific Article ref. Year of publication 2016 Source Materialwissenschaft und Werkstofftechnik, S. 1109 - 1120 Volume 47 Issue/Journal number 11 ISSN 1521-4052 DOI https://doi.org/10.1002/mawe.201600635 Orthorhombic phase formation in a Nb-rich γ-TiAl based alloy – an in situ synchrotron radiation investigation Author(s) Rackel, Marcus W., Stark, Andreas, Gabrisch, Heike, Schell, Norbert, Schreyer, Andreas, Pyczak, Florian Type Scientific Article ref. Year of publication 2016 Source Acta Materialia, S. 343 - 351 Volume 121 ISSN 1359-6454 DOI https://doi.org/10.1016/j.actamat.2016.09.030 Microstructure and mechanical properties of a forged beta-solidifying gamma TiAl alloy in different heat treatment conditions Author(s) Bolz, Sebastian, Oehring, Michael, Lindemann, Janny, Pyczak, Florian, Paul, Jonathan, Stark, Andreas, Lippmann, Thomas, Roth-Fagaraseanu, Dan, Schreyer, Andreas, Weiß, Sabine, Schrüfer, Susanne Type Scientific Article ref. Year of publication 2015 Source Intermetallics, S. 71 - 83 Volume 2015 Issue/Journal number 58 The effect of magnetic annealing on crystallographic texture and microstructure of Fe-2.6% Si Author(s) Salih, M. Z., Uhlarz, M., Pyczak, Florian, Brokmeier, Heinz Günter, Weidenfeller, Bernd, Al-hamdany, N., Zhong, Z., Schell, N., Gan, Weimin Type Scientific Article ref. Year of publication 2015 Source Journal of Magnetism and Magnetic Materials, S. 350 - 359 Issue/Journal number 381 ISSN 0304-8853 DOI https://doi.org/10.1016/j.jmmm.2015.01.004 Tensile properties of Al–12Si matrix composites reinforced with Ti–Al-based particles Author(s) Wang, Zhi, Prashanth, Konda G., Chaubey, Anil K., Löber, Lukas, Schimansky, Frank-Peter, Pyczak, Florian, Zhang, W. W., Scudino, Sergio, Eckert, Jürgen Type Scientific Article ref. Year of publication 2015 Source Journal of Alloys and Compounds, S. 256 - 259 Issue/Journal number 630 ISSN 0925-8388 Influence of Iridium on the Properties of γ′-Strengthened Co-Base Superalloys Author(s) Bauer, Alexander, Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2015 Source Advanced Engineering Materials, S. 748 - 754 Volume 17 Issue/Journal number 6 ISSN 1527-2648 Effects of Carbon Content, Annealing Condition and Internal Defects on the nucleation, growth and coarsening of P-type Carbides in High Niobium Containing TiAl Alloys Author(s) Wang, Li, Pyczak, Florian, Gabrisch, Heike, Lorenz, Uwe, Münch, Mathias, Schimansky, Frank-Peter, Schreyer, Andreas, Stark, Andreas Type conference publication Year of publication 2015 Publisher name Red Hook, NY : Curran Source Advanced structural and functional intermetallic-based alloys, November 30 - December 5, 2014, Boston, Massachusetts, USA, S. 61 - 66 ISBN 978-1-5108-0634-4 Materials Research Society symposium proceedings ; 1760 Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial Author(s) Zhao, Dapeng, Chang, Keke, Ebel, Thomas, Nie, Hermin, Willumeit-Römer, Regine, Pyczak, Florian Type Scientific Article ref. Year of publication 2015 Source Journal of Alloys and Compounds, S. 393 - 400 Volume 640 ISSN 0925-8388 Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys Author(s) Wang, Li, Gabrisch, Heike, Lorenz, Uwe, Schimansky, Frank-Peter, Schreyer, Andreas, Stark, Andreas, Pyczak, Florian Type Scientific Article ref. Year of publication 2015 Source Intermetallics, S. 111 - 119 Volume 66 ISSN 0966-9795 DOI https://doi.org/10.1016/j.intermet.2015.07.001 The effect of zirconium addition on sintering behaviour, microstructure and creep resistance of the powder metallurgy processed alloy Ti-45Al-5Nb-0.2B-0.2C Author(s) Soyama, Juliano, Oehring, Michael, Limberg, Wolfgang, Ebel, Thomas, Kainer, Karl Ulrich, Pyczak, Florian Type Scientific Article ref. Year of publication 2015 Source Materials and Design, S. 87 - 94 Volume 84 ISSN 0261-3069 Sintering behaviour of Ti–45Al–5Nb–0.2B–0.2C alloy modifications by additions of elemental titanium and aluminium Author(s) Soyama, Juliano, Oehring, Michael, Limberg, Wolfgang, Ebel, Thomas, Kainer, Karl Ulrich, Pyczak, Florian Type Scientific Article ref. Year of publication 2015 Source Powder Metallurgy, S. 369 - 375 Volume 58 Issue/Journal number 5 ISSN 1743-2901 The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys Author(s) Pyczak, Florian, Bauer, Alexander, Göken, Mathias, Lorenz, Uwe, Neumeier, Steffen, Oehring, Michael, Paul, Jonathan, Schell, Norbert, Schreyer, Andreas, Symanzik, Felix Type Scientific Article ref. Year of publication 2015 Source Journal of Alloys and Compounds, S. 110 - 115 Issue/Journal number 632 ISSN 0925-8388 In situ synchrotron radiation measurements of orthorhombic phase formation in an advanced TiAl alloy with modulated microstructure Author(s) Rackel, Marcus W., Stark, Andreas, Gabrisch, Heike, Schimansky, Frank-Peter, Schell, Norbert, Schreyer, Andreas, Pyczak, Florian Type conference publication Year of publication 2015 Publisher name Red Hook, NY : Curran Source Advanced structural and functional intermetallic-based alloys, November 30 - December 5, 2014, Boston, Massachusetts, USA, S. 120 - 126 ISBN 978-1-5108-0634-4 Materials Research Society symposium proceedings ; 1760 In situ High-Energy X-Ray Diffraction during Hot-Forming of a Multiphase TiAl Alloy Author(s) Stark, Andreas, Rackel, Marcus W., Tchouaha Tankoua, Aristide, Oehring, Michael, Schell, Norbert, Lottermoser, Lars, Schreyer, Andreas, Pyczak, Florian Type Scientific Article ref. Year of publication 2015 Source Metals, S. 2252 - 2265 Volume 5 Issue/Journal number 4 ISSN 2075-4701 In-situ monitoring of thermal treatments and hot deformation of a y-TiAl alloy by high energy X-ray diffraction Author(s) Pyczak, Florian, Rackel, Marcus W., Gabrisch, Heike, Halici, Dalic, Lorenz, Uwe, Schreyer, Andreas, Stark, Andreas Type conference publication Year of publication 2015 Publisher name Tokyo : The 123rd Committee of Japan Society for the Promotion of Science, IAI Source Proceedings of the 1st International Conference on Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering (123HiMAT-2015), June 29 - July 3, 2015, Sapporo, Japan, S. 323 - 326 ISBN 978-4-9908874-0-7 Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding Author(s) Zhao, Dapeng, Chang, Keke, Ebel, Thomas, Quian, M., Willumeit-Römer, Regine, Yan, M., Pyczak, Florian Type Scientific Article ref. Year of publication 2014 Source Powder Metallurgy, S. 2 - 4 Volume 57 Issue/Journal number 1 ISSN 1743-2901 Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu)aluminum alloys Author(s) Larráyoz Izcara, Xabier, Blank, Aharon, Pyczak, Florian, Staron, Peter, Schumann, Sandor, Huber, Norbert Type Scientific Article ref. Year of publication 2014 Source Materials Science and Engineering A, S. 46 - 53 Issue/Journal number 610 ISSN 1873-4936 Effect of hot forging on microstructure and tensile properties of Ti–TiB based composites produced by casting Author(s) Imayev, V., Gaisin, R., Gaisina, E., Imayev, R., Hecht, H.-J., Pyczak, Florian Type Scientific Article ref. Year of publication 2014 Source Materials Science and Engineering A, S. 34 - 41 Issue/Journal number 609 ISBN 1873-4936 Selective laser melting of a beta-solidifying TNMB1 titanium aluminide alloy Author(s) Löber, Lukas, Schimansky, Frank-Peter, Kühn, Uta, Pyczak, Florian, Eckert, Jürgen Type Scientific Article ref. Year of publication 2014 Source Journal Materials Processing Technology, S. 1852 - 1860 Volume 214 Issue/Journal number 9 ISSN 0924-0136 Improvement of the creep properties of TiAl alloys densified by Spark Plasma Sintering Author(s) Jabbar, Houria, Monchoux, Jean-Philippe, Thomas, Marc, Pyczak, Florian, Couret, Alain Type Scientific Article ref. Year of publication 2014 Source Intermetallics, S. 1 - 3 Issue/Journal number 46 ISSN 0966-9795 The transformation mechanism of β phase to ω-related phases in Nb-rich γ-TiAl alloys studied by in situ high-energy X-ray diffraction Author(s) Stark, Andreas, Oehring, Michael, Pyczak, Florian, Lippmann, Thomas, Lottermoser, Lars, Schreyer, Andreas Type Scientific Article ref. Year of publication 2014 Source Materials Science Forum, S. 85 - 89 Issue/Journal number 772 ISSN 1662-9752 Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material Author(s) Zhao, Dapeng, Chang, Keke, Ebel, Thomas, Quian, M., Willumeit-Römer, Regine, Yan, M., Pyczak, Florian Type Scientific Article ref. Year of publication 2013 Source Journal of the Mechanical Behavior of Biomedical Materials, S. 171 - 182 Issue/Journal number 28 ISSN 1878-0180 Scanning and transmission electron microscopy investigations of defect arrangements in a two-phase gamma-TiAl alloy Author(s) Weidner, Anja, Pyczak, Florian, Biermann, H. Type Scientific Article ref. Year of publication 2013 Source Materials Science and Engineering A, S. 49 - 56 Issue/Journal number 571 ISSN 1873-4936 In situ high-energy XRD study of the hot-deformation behavior of a novel γ-TiAl alloy Author(s) Stark, Andreas, Schwaighofer, Emanuel, Mayer, Svea, Clemens, Helmut, Lippmann, Thomas, Lottermoser, Lars, Schreyer, Andreas, Pyczak, Florian Type conference publication Year of publication 2013 Publisher name Cambridge : Cambridge Univ. Press Source Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A, S. 35 - 40 DOI https://doi.org/10.1557/opl.2012.1577 MRS proceedings ; 1516 Diffusion brazing of γ-TiAl-alloys: Investigations of the joint by electron microscopy and high-energy X-ray diffraction Author(s) Hauschildt, Katja, Stark, Andreas, Lorenz, Uwe, Schell, Norbert, Fischer, Torben, Blankenburg, Malte, Müller, Martin, Pyczak, Florian Type conference publication Year of publication 2013 Publisher name Cambridge : Cambridge Univ. Press Source Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A, S. 215 - 220 DOI https://doi.org/10.1557/opl.2012.1750 MRS proceedings ; 1516 Carbides in Ti-45Al-5Nb alloys with different carbon contents Author(s) Gabrisch, Heike, Stark, Andreas, Schimansky, Frank-Peter, Wang, Li, Schell, Norbert, Pyczak, Florian Type Scientific Article ref. Year of publication 2013 Source Intermetallics, S. 44 - 53 Issue/Journal number 33 ISSN 0966-9795 Plastic Deformation Mechanisms in a Crept L12 hardened Co-Base Superalloy Author(s) Pyczak, Florian, Bauer, A., Göken, Mathias, Neumeier, Steffen, Lorenz, U., Oehring, Michael, Schell, N., Schreyer, Andreas, Stark, Andreas, Szymanzik, F. Type Scientific Article ref. Year of publication 2013 Source Materials Science and Engineering A, S. 13 - 18 Issue/Journal number 571 ISSN 1873-4936 TiAlNb-alloy with a modulated B19 containing constituent produced by powder metallurgy Author(s) Gabrisch, Heike, Lorenz, Uwe, Oehring, Michael, Paul, Jonathan, Pyczak, Florian, Rackel, Marcus W., Schimansky, Frank-Peter, Stark, Andreas Type conference publication Year of publication 2013 Publisher name Cambridge : Cambridge Univ. Press Source Intermetallic-based alloys - science, technology and applications, symposium held November 25-30, Boston, Massachusetts, U.S.A, S. 35 - 40 DOI https://doi.org/10.1557/opl.2012.1575 MRS proceedings ; 1516 Microstructural refinement of boron-containing β-solidifying γ-titanium aluminide alloys through heat treatments in the β phase field Author(s) Oehring, Michael, Stark, Andreas, Paul, Jonathan David Heaton, Lippmann, Thomas, Pyczak, Florian Type Scientific Article ref. Year of publication 2012 Source Intermetallics, S. 12 - 20 Issue/Journal number 32 ISBN 0966-9795 Creep properties of different γ'- strengthened Co-base superalloys Author(s) Bauer, A., Neumeier, Steffen, Pyczak, Florian, Singer, Robert F., Göken, Mathias Type Scientific Article ref. Year of publication 2012 Source Materials Science and Engineering A, S. 333 - 341 Issue/Journal number 550 ISSN 1873-4936 Influence of the sintering atmosphere on the mechanical properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C Author(s) Limberg, Wolfgang, Ebel, Thomas, Pyczak, Florian, Oehring, Michael, Schimansky, Frank-Peter Type Scientific Article ref. Year of publication 2012 Source Materials Science and Engineering A, S. 323 - 329 Issue/Journal number 552 Creep strength and microstructure of polycrystalline γ’–strengthened cobalt-base superalloys Author(s) Bauer, Alexander, Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Editor(s) Huron, Eric S., Reed, Roger C., Hardy, Mark C., Mills, Michael J., Montero, Rick E., Portella, Pedro D., Telesmann, Jack Type conference publication Year of publication 2012 Publisher name Hoboken, New Jersey : Wiley [u.a.] Source Superalloys 2012, proceedings of the 12th International Symposium on Superalloys, held September 9-13, 2012 at Seven Springs Mountain Resort, Seven Springs, PA, S. 695 - 703 ISBN 978-1-118-51643-0 978-0-470-94320-5 Microstructure development and hardness of a powder metallurgical multi phase gamma-TiAl based alloy Author(s) Schloffer, Martin, Iqbal, Farasat, Gabrisch, Heike, Schwaighofer, Emanuel, Schimansky, Frank-Peter, Mayer, Svea, Stark, Andreas, Lippmann, Thomas, Göken, Mathias, Pyczak, Florian, Clemens, Helmut Type Scientific Article ref. Year of publication 2012 Source Intermetallics, S. 231 - 240 Issue/Journal number 22 ISSN 0966-9795 DOI https://doi.org/10.1016/j.intermet.2011.11.015 Effect of eutectics on plastic deformation and subsequent recrystallization in the single crystal nickel base superalloy CMSX-4 Author(s) Wang, Li, Pyczak, Florian, Zhang, Jian, Lou, Langhong, Singer, Robert F. Type Scientific Article ref. Year of publication 2012 Source Materials Science and Engineering A, S. 487 - 492 Issue/Journal number 532 ISSN 1873-4936 Metal injection moulding of titanium and titanium-aluminides Author(s) Ebel, Thomas, Ferri, Orley Milagres, Limberg, Wolfgang, Oehring, Michael, Pyczak, Florian, Schimansky, Frank-Peter Type Scientific Article ref. Year of publication 2012 Source Key Engineering Materials, S. 153 - 160 Issue/Journal number 520 ISSN 1662-9795 From titanium to magnesium: processing by advanced metal injection moulding Author(s) Kainer, Karl Ulrich, Ebel, Thomas, Ferri, Orley Milagres, Limberg, Wolfgang, Pyczak, Florian, Schimansky, Frank-Peter Type Scientific Article ref. Year of publication 2012 Source Powder Metallurgy, S. 315 - 321 Volume 55 Issue/Journal number 4 The Characterisation of a Powder Metallurgically Manufactured TNM™ Titanium Aluminide Alloy Using Complimentary Quantitative Methods Author(s) Schloffer, Martin, Schmoelzer, Thomas, Mayer, Svea, Schwaighofer, Emanuel, Hawranek, G., Schimansky, Frank-Peter, Pyczak, Florian, Clemens, Helmut Type Scientific Article ref. Year of publication 2011 Source Practical Metallography - Praktische Metallkunde, S. 594 - 604 Volume 48 Issue/Journal number 11 ISSN 0032-678x DOI https://doi.org/10.3139/147.110138 Research with Neutron and Synchrotron Radiation on Aerospace and Automotive Materials and Components Author(s) Kaysser, Wolfgang, Esslinger, Jörg, Abetz, Volker, Huber, Norbert, Kainer, Karl Ulrich, Klassen, Thomas, Pyczak, Florian, Schreyer, Andreas, Staron, Peter Type Scientific Article ref. Year of publication 2011 Source Advanced Engineering Materials, S. 637 - 657 Volume 13 Issue/Journal number 8 ISSN 1527-2648 DOI https://doi.org/10.1002/adem.201100150 In situ studies of light metals with synchrotron radiation and neutrons Author(s) Staron, Peter, Beckmann, Felix, Lippmann, Thomas, Stark, Andreas, Oehring, Michael, Pyczak, Florian, Salgado, Mario, Hort, Norbert, Eckerlebe, Horst, Kainer, Karl Ulrich, Müller, Martin, Schreyer, Andreas Type Scientific Article ref. Year of publication 2011 Source Materials Science Forum, S. 192 - 197 Issue/Journal number 690 ISSN 1662-9752 In Situ Observation of Various Phase Transformation Paths in Nb-Rich TiAl Alloys during Quenching with Different Rates Author(s) Stark, Andreas, Oehring, Michael, Pyczak, Florian, Schreyer, Andreas Type Scientific Article ref. Year of publication 2011 Source Advanced Engineering Materials, S. 700 - 704 Volume 18 Issue/Journal number 8 ISSN 1527-2648 Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5 Author(s) Neumeier, Steffen, Dinkel, Michael, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2011 Source Materials Science and Engineering A, S. 815 - 822 Issue/Journal number 528 ISSN 1873-4936 Influence of Rhenium and Ruthenium on Local Mechanical Properties of Nickel-Base Superalloys Author(s) Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2011 Source Philosophical Magazine A, S. 4187 - 4199 Volume 91 Issue/Journal number 33 ISSN 1478-6443 Novel Processing Techniques for gamma-TiAl Alloys Author(s) Pyczak, Florian, Appel, Fritz, Limberg, Wolfgang, Lorenz, Uwe, Oehring, Michael, Paul, Jonathan, Schimansky, Frank-Peter Type Scientific Article ref. Year of publication 2011 Source Materials Science Forum, S. 145 - 148 Issue/Journal number 690 ISSN 1662-9752 Influence of Quenching Rates on the Transformation of Ternary Phases in Nb-rich γ-TiAl Alloys Author(s) Stark, Andreas, Oehring, Michael, Pyczak, Florian Editor(s) Palm, Martin, Bewlay, Bernard P., Kumar, K. Sharvan, Yoshimi, Kyosuke Type conference publication Year of publication 2011 Publisher name Cambridge : Cambridge Univ. Press Source Intermetallic-based alloys for structural and functional applications, symposium held November 29 - December 3, Boston, Massachusetts, U.S.A, S. 107 - 112 DOI https://doi.org/doi:10.1557/opl.2011.30 MRS proceedings ; 1295 Microstructure and creep strength of different γ/γ'- strengthened Co-base superalloy variants Author(s) Bauer, A., Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2010 Source Scripta Materialia, S. 1197 - 1200 Volume 63 Issue/Journal number 12 ISSN 1359-6462 Microstructure and mechanical properties of high niobium containing TiAl alloys elaborated by Spark Plasma Sintering Author(s) Jabbar, Houria, Monchoux, Jean-Philippe, Houdellier, Florent, Dollé, Mickaël, Schimansky, Frank-Peter, Pyczak, Florian, Thomas, Marc, Couret, Alain Type Scientific Article ref. Year of publication 2010 Source Intermetallics, S. 2312 - 2321 Volume 18 Issue/Journal number 12 ISSN 0966-9795 Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold Author(s) Weidner, Anja, Amberger, Dorothea, Pyczak, Florian, Schönbauer, Bernd, Stanzl-Tschegg, Stefanie, Mughrabi, Hael Type Scientific Article ref. Year of publication 2010 Source International Journal of Fatigue, S. 872 - 878 Volume 32 Issue/Journal number 6 ISSN 0142-1123 Temperature Dependence of Element Partitioning in Rhenium and Ruthenium Bearing Nickel-Base Superalloys Author(s) Pyczak, Florian, Neumeier, Steffen, Göken, Mathias Type Scientific Article ref. Year of publication 2010 Source Materials Science and Engineering A, S. 7939 - 7943 Issue/Journal number 527 ISSN 1873-4936 Microstructural and Micromechanical Characterisation of TiAl Alloys Using Atomic Force Microscopy and Nanoindentation Author(s) Gebhard, Susanne, Pyczak, Florian, Göken, Mathias Type Scientific Article ref. Year of publication 2010 Source Materials Science and Engineering A, S. 235 - 241 Issue/Journal number 523 ISSN 1873-4936 Microstructure evolution in the Nickel base superalloy Allvac®718Plus™ Author(s) Löhnert, K., Pyczak, Florian Editor(s) Ott, E. A., Groh, E. R., Banik, A., Dempster, I., Gabb, Timothy P., Helmink, R., Liu, X., Mitchell, A., Sjöberg, G. P., Wusatowska-Sarnek, A. Type conference publication Year of publication 2010 Publisher name Boston [u.a.] : Wiley Source Superalloy 718 and derivatives, proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, held October 10 - 13, 2010, Pittsburgh, PA, S. 877 - 891 ISBN 978-1-61782-770-9 On the role of eutectics during recrystallization in a single crystal nickel-base superalloy - CMSX-4 Author(s) Wang, Li, Pyczak, Florian, Zhang, Jian, Singer, Robert F. Type Scientific Article ref. Year of publication 2009 Source International Journal of Materials Research, S. 1046 - 1051 Volume 100 Issue/Journal number 8 ISSN 2195-8556 Change of Internal Stress and Strain States in Nickel-Base Superalloys during Creep Deformation Author(s) Pyczak, Florian, Neumeier, Steffen, Göken, Mathias Type Scientific Article ref. Year of publication 2009 Source Materials Science and Engineering A, S. 295 - 300 Issue/Journal number 510-511 ISSN 1873-4936 Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys Author(s) Rettig, Ralf, Heckl, Astrid, Neumeier, Steffen, Pyczak, Florian, Göken, Mathias, Singer, Robert F. Type Scientific Article ref. Year of publication 2009 Source Defect and Diffusion Forum, S. 101 - 108 Issue/Journal number 289-292 ISSN 1662-9507 XRD profile analysis characterization of ultrafine grained Al-Mg alloys Author(s) Dinkel, Michael, Pyczak, Florian, May, Johannes, Höppel, Heinz Werner, Göken, Mathias Type Scientific Article ref. Year of publication 2008 Source Journal of Materials Science, S. 7481 - 7487 Volume 43 Issue/Journal number 23-24 ISSN 1573-4803 Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys Author(s) Heinz, Paul, Volek, Andreas, Singer, Robert F., Dinkel, Michael, Pyczak, Florian, Göken, Mathias, Ott, Michael, Affeldt, Ernst, Vossberg, Andreas Editor(s) Öchsner, Andreas, Murch, Graeme E. Type conference publication Year of publication 2008 Publisher name Stafa-Zurich [u.a.] : Trans Tech Publ. Source Diffusion in Solids and Liquids III, 3rd International Conference on Diffusion in Solids and Liquids, Liege Konferenz, S. 294 - 299 ISBN 978-3-908451-51-8 Defect and diffusion forum ; 273/276 The Influence of Ruthenium and Rhenium on the local Properties of the gamma- and gamma'-Phase in Nickel-Base Superalloys and their Consequences for Alloy Behaviour Author(s) Neumeier, Steffen, Pyczak, Florian, Göken, Mathias Editor(s) Reed, Roger C., Green, Kenneth A., Caron, Pierre, Gabb, Timothy P., Fahrmann, Michael G., Huron, Eric S., Woodard, Shiela R. Type conference publication Year of publication 2008 Publisher name Warrendale, Pa. : TMS Source Superalloys 2008, proceedings of the Eleventh International Symposium on Superalloys, held September 14 - 18, 2008, Pennsylvania, USA, S. 109 - 119 ISBN 978-0-87339-728-5 New Boron and Silicon Free Single Crystal-Diffusion Brazing Alloys Author(s) Dinkel, Michael, Heinz, Paul, Pyczak, Florian, Volek, Andreas, Ott, Michael, Affeldt, Ernst, Vossberg, Andreas, Göken, Mathias, Singer, Robert F. Editor(s) Reed, Roger C., Green, Kenneth A., Caron, Pierre, Gabb, Timothy P., Fahrmann, Michael G., Huron, Eric S., Woodard, Shiela R. Type Scientific Article not ref. Year of publication 2008 Publisher name Warrendale, Pa. : TMS Source Superalloys 2008, proceedings of the Eleventh International Symposium on Superalloys, held September 14 - 18, 2008, Pennsylvania, USA, S. 211 - 220 ISBN 978-0-87339-728-5 CBED study of local strain distribution in gamma and gamma' phases of a crept Ni base superalloy Author(s) Lu, Z., Pyczak, Florian, Biermann, H., Mughrabi, Hael Type Scientific Article ref. Year of publication 2006 Source Acta Metallurgica Sinica - Chinese edition, S. 694 - 698 Volume 42 Issue/Journal number 7 Nanoindentation and Orientation Measurements in Single Crystalline Brazing Joints of Nickel-Base Superalloys Author(s) Dinkel, Michael, Pyczak, Florian, Göken, Mathias, Heinz, Paul, Volek, Andreas, Singer, Robert F., Ott, Michael, Affeldt, Ernst, Vossberg, Andreas Editor(s) Lecomte-Beckers, Jacqueline, Carton, M., Schubert, F., Ennis, P. J. Type conference publication Year of publication 2006 Publisher name Jülich : Forschungszentrum Source Materials for advanced power engineering 2006, proceedings of the 8th Liege Conference, Bd. 2, S. 633 - 642 ISBN 3-89336-436-6 The influence of different alloying elements on the development of the gamma/gamma' microstructure of nickel-base superalloys during high-temperature annealing and deformation Author(s) Pyczak, Florian, Devrient, B., Neuner, F. C., Mughrabi, Hael Type Scientific Article ref. Year of publication 2005 Source Acta Materialia, S. 3879 - 3891 Volume 53 Issue/Journal number 14 ISSN 1359-6454 Partitioning of Re between gamma and gamma' phase in nickel-base superalloys Author(s) Volek, Andreas, Pyczak, Florian, Singer, Robert F., Mughrabi, Hael Type Scientific Article ref. Year of publication 2005 Source Scripta Materialia, S. 141 - 145 Volume 52 Issue/Journal number 2 Development of a New Alloy for Directional Solidification of Large Industrial Gas Turbine Blades Author(s) Bürgel, R., Grossmann, J., Lüsebrink, O., Mughrabi, Hael, Pyczak, Florian, Singer, Robert F., Volek, Andreas Editor(s) Green, Kenneth A., Harada, H., Howson, T. E., Pollock, Tresa M., Reed, Roger C., Schirra, J. J., Walston, S. Type conference publication Year of publication 2004 Publisher name Warrendale, Pa. : TMS Source Superalloys 2004, proceedings of the Tenth International Symposium on Superalloys, held September 19 - 23, 2004 at the Seven Springs Mountain Resort in Champion, Pennsylvania, S. 25 - 34 ISBN 0-87339-576-x The Effects of Different Alloying Elements on the Thermal Expansion Coefficients, Lattice Constants and Misfit of Nickel-Based Superalloys Investigated by X-Ray Diffraction Author(s) Pyczak, Florian, Devrient, B., Mughrabi, Hael Editor(s) Green, Kenneth A., Harada, H., Howson, T. E., Pollock, Tresa M., Reed, Roger C., Schirra, J. J., Walston, S. Type conference publication Year of publication 2004 Publisher name Warrendale, Pa. : TMS Source Superalloys 2004, proceedings of the Tenth International Symposium on Superalloys, held September 19 - 23, 2004, Pennsylvania, S. 827 - 836 Fast and reliable evaluation of lattice distortions from convergent-beam electron diffraction patterns Author(s) Lu, Zheng, Pyczak, Florian, Krämer, S., Biermann, H., Mughrabi, Hael Type Scientific Article ref. Year of publication 2003 Source The philosophical magazine, S. 2383 - 2397 Volume 83 Issue/Journal number 20 ISSN 1478-6443 Measurement of local elastic strains in the single-crystal nickel-based superalloy CMSX-6 by convergent-beam electron diffraction Author(s) Lu, Z., Pyczak, Florian, Biermann, H., Mughrabi, Hael Type Scientific Article ref. Year of publication 2002 Source Philosophical Magazine A, S. 1219 - 1234 Volume 82 Issue/Journal number 6 Microstructural and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigations Author(s) Durst, K., Pyczak, Florian, Biermann, H., Göken, Mathias, Mughrabi, Hael, Vehoff, H. Type conference publication Year of publication 2002 Publisher name Frankfurt am Main : Werkstoffinformationsgesellschaft mbH Source Proceedings, Materials Week 2002 ISBN 3-88355-314-X Measurement of the local elastic strains in Aged Monocrystalline Nickel Base Superalloys by CBED Author(s) Großmann, Berthold von, Biermann, H., Tetzlaff, Ulrich, Pyczak, Florian, Mughrabi, Hael Type Scientific Article ref. Year of publication 2000 Source Scripta Materialia, S. 859 - 864 Volume 43 Issue/Journal number 9 ISSN 1359-6462 CBED Measurement of Residual Internal Strains in the Neighbourhood of TCP Phases in Ni-Base Superalloys Author(s) Pyczak, Florian, Biermann, H., Mughrabi, Hael, Volek, Andreas, Singer, Robert F. Editor(s) Pollock, Tresa M., Kissinger, R. D., Bowman, R. R., Green, Kenneth A., McLean, M., Olson, S. L., Schirra, J. J. Type conference publication Year of publication 2000 Publisher name Warrendale, Pa. : The Minerals, Metals & Materials Society, Source Superalloys 2000, proceedings of the Ninth International Symposium on Superalloys, held September 17 - 21, 2000, Seven Springs, PA, S. 367 - 377 ISBN 0-87339-477-1 Overview of MD-Number Calculations as a Tool for Phase Stability Prediction in Ni-Base Superalloys Author(s) Pyczak, Florian, Mughrabi, Hael Editor(s) Morris, David G., Naka, S., Caron, Pierre Type conference publication Year of publication 2000 Publisher name Weinheim [u.a.] : Wiley-VCH Source Intermetallics and superalloys, Proceedings of EUROMAT 99, vol. 10, S. 46 - 51 ISBN 3-527-30192-5 CBED Measurement of Residual Internal Strains in the Neighbourhood of TCP Phases in Ni-Base Superalloys Author(s) Pyczak, Florian, Mughrabi, Hael Editor(s) Morris, David G., Naka, S., Caron, Pierre Type conference publication Year of publication 2000 Publisher name Weinheim [u.a.] : Wiley-VCH Source Intermetallics and superalloys, Proceedings of EUROMAT 99, vol. 10, S. 91 - 95 ISBN 3-527-30192-5
This website uses cookies. Those have two functions: On the one hand they are providing basic functionality for this website. On the other hand they allow us to improve our content for you by saving and analyzing anonymized user data. You can redraw your consent to using these cookies at any time. Find more information regarding cookies on our Data Protection Declaration and regarding us on the Imprint .
Settings
Accept all cookies
Save
×
