Conferences
Here you will find the list of publications of the Microelectronics Chair. Some are available as pdf downloads, but please note the respective copyrights.
A unary coded current steering DAC with sequential stepping of the thermometer coded register in 1 and 2 LSB steps
Stefan Bramburger, Pavol Pitonak, Dirk Killat
IEEE MIPRO 2018, 41st Internatinonal Convention on Information and Communication Technology, Electronics and Microelectronics, 21-25 May, 2018, Opatija, Croatia
Interpolation algorithm for asynchronous ADC-data
Stefan Bramburger, Benny Zinke, Dirk Killat
Advances in Radio Science, Vol. 15, pp. 163 - 168, 2017
Design of a High-Voltage Rail-to-Rail Error Amplifier based on Standard CMOS used in an LDO
Sara Pashmineh, Stefan Bramburger, Dirk Killat
The 29th Annual IEEE Canadian Conference on Electrical and Computer Engineering (IEEE CCECE 2016), 15-18 May 2016, Vancouver, Canada
A High-Voltage Driver Nased on Stacked Low-Voltage Transistors with Minimized On-Resistance for a Buck Converter in 65 nm CMOS
Sara Pashmineh, Dirk Killat
The 29th Annual IEEE Canadian Conference on Electrical and Computer Engineering (IEEE CCECE 2016), 15-18 May 2016, Vancouver, Canada
Design of a High-Voltage Driver Based on Low-Voltage CMOS with an Adapted Level Shifter Optimized for a Wide Range of Supply Voltage
Sara Pashmineh, Dirk Killat
IEEE 22nd International Conference on Electronics, Circuits and Systems (ICECS 2015), 06-09 December 2015, Cairo, Egypt
Self-Biasing High-Voltage Driver Based on Standard CMOS with an Adapted Level Shifter for a Wide Range of Supply Voltages
Sara Pashmineh, Dirk Killat
IEEE Nordic Circuits and Systems Conference (NORCAS), 26-28 October 2015, Oslo, Norway
High-voltage circuits for power management on 65 nm CMOS
Sara Pashmineh, Dirk Killat
Advances in Radio Science, Vol. 13, pp. 109 - 120, 2015
Design of high-voltage level shifters based on stacked standard transistors for a wide range of supply voltages
Sara Pashmineh and Dirk Killat,
SBCCI 2015, 28th Symposium on Integrated Circuits and Systems Design, Salvador, Brazil, September 2015
Design of a High-Voltage Differential Amplifier Based on stacked Low-Voltage Standard CMOS with Different Input Stages
Sara Pashmineh, Dirk Killat
IEEE MIPRO 2015, 38th international convention on Information and Communication Technology, Electronics and Microelectronics, Opatija, May 2015
Digital observer based current loop control for buck converters - Prototype implementation on an FPGA
Mezger, F.; Killat,
D.23rd International Symposium on Industrial Electronics (ISIE), Istanbul, June 2014
A digital observer based current loop control for buck converters
Mezger, F.; Killat,
D.39th Annual Conference of the IEEE Industrial Electronics Society, Wien, November 2013
An LDO using stacked transistors on 65 nm CMOS
Pashmineh, S.; Bramburger, St.; Xu, H.; Ortmanns, M.; Killat, D.;
21st European Conference on Circuit Theory and Design (ECCTD), Dresden, September 2013
Design and analysis of novel dynamic latched comparator with reduced kickback noise for high-speed ADCs
Huang, Y.; Schleifer, H.; Killat, D.;
21st European Conference on Circuit Theory and Design (ECCTD), Dresden, September 2013
An efficiency-enchanced asynchronous buck converter with threshold compensated freewheeling diode
Xu, H.; Pashmineh, S.; Zhang, Y.; Killat, D.; Ortmanns, M.
IEEE ISCDG, September 2013, Dresden
Design of high speed high-voltage drivers based on stacked standard CMOS for various supply voltages
Pashmineh, S., Xu, H., Ortmanns, M., Killat, D.;
IEEE MWSCAS 2013, Columbus, Ohio, August 4 -7, p 529-532
Technique for Reducing On-Resistance of High-Voltage Drivers Based on Stacked Standard CMOS
Pashmineh, S.; Xu, H.;Killat, D.;
9th Conference on Ph. D. Research in Microelectronics and Electronics (PRIME) 2013, Session T1A2, Paper ID 23, Villach, 24-27th June 2013
A current mode 6-bit self-clocked tracking ADC with adaptive clock frequency for DC-DC converters
IEEE International Symposium on Circuits and Systems (ISCAS 2013), Session A1L-H, Paper ID 1418, Peking, 19-23 Mai, 2013
A single-inductor multiple-bipolar-output (SIMBO) converter with fully-adaptive feedback matrix and improved light-load ripple
Xu, W.; Li, Y.; Hong, Z.; Killat, D.; Schleifer, H.;
37th European Solid-State Circuits Conference (ESSCIRC) 2011, Session C3L-G
A Dual-Mode Single-Inductor Dual-Output Switching Converter with Small Ripple
Li, Y.; Gong, X.;Xu, W.; Hong, Z.; Killat, D.;
IEEE Tansactions on Power Electronics vol.25, no.3, pp.614-623, March 2010
A Practical Extracted Model for Latchup Analysis in CMOS
Li, Y.; Gong, X.;Xu, W.; Hong, Z.; Killat, D.;
ASICON 2009, October 20—23, 2009, Changsha, China
A Single-Inductor Dual-Output Switching Converter with Low Ripples and Improved Cross Regulation
Xu, W.; Li, Y.; Gong, X.; Hong, Z.; Killat, D.;
IEEE Custom Integrated Circuit Conference, accepted paper, Sep. 2009
A single-inductor dual-output switching converter with average current mode control
Xu, W.; Zhu, X.; Hong, Z.; Killat, D;
Journal of Semiconductors, P.R.C., Vol. 30, No. 9, Sept. 2009
Design of Single–Inductor Dual–Output Switching Converters with Average Current Mode Control
Xu,W.; Zhu, X; Hong, Z; Killat, D.;
Asia Pacific Conference on Circuits and Systems, Nov. 2008
Modeling of Integrator Leakage in a Continuous Time ΔΣ–Modulator using Matlab
Killat, D.; Schleifer, H.;
Elektrotechnik und Informationstechnik 125/4, April 2008, pp. 118–122, Springer Verlag
A Low Power and Low 1/f–Noise Transconductance for the Input Stage of a Current Sense A/D Converter
Killat, D.;
ASICON 2007, October 26—29, 2007, Guilin, China; IEEE Catalog 07TH 8950.
A Capacitive Step-Down Converter Using a Linear Mode Pre-Regulator for Improved Load Regulation
Bin Sh., Yujia Y., Zhiliang H., Chihao X.; Killat D.;
ICSICT 2006, October 23—26, 2006, Shanghai, China; IEEE Catalog 06EX 1294C.
A Sub-1-V CMOS Bandgap using Forward Body Bias of the PMOS Differential Pair for Reduction of the Threshold Voltages
Killat, D.;
ICSICT 2006, October 23—26, 2006, Shanghai, China
IEEE Catalog 06EX 1294C.
Full Digital Dimming Regulation of Fluorescent Lamps with –54 dB/Hz Light Ripple
Killat D.; Baraniecki R.;
IEEE IAS Conference and Annual Meeting, October 2–6, 2005, Hongkong, (received IEEE paper award).
A 36-V H-bridge driver interface in a standard 0.35-µm CMOS process
Krenzke, R.; Cang Ji; Killat, D.;
ISCAS 2005 IEEE International Symposium on Circuits and Systems 23-26 May 2005, Page(s):3651 - 3654 Vol. 4.
A 14-V high speed driver in 5-V-only 0.35-µm standard CMOS
Killat, D.; Salzmann, O.; Baumgartner, A.;
ESSCIRC 2004 Proceeding of the 30th European Solid-State Circuits Conference 21-23 Sept. 2004 Page(s):151 – 154.
A One-Chip Solution for Electronic Ballasts
Killat, D.;
Power Electronics Technology, March 2004.
One-chip solution in 0.35 µm standard CMOS for electronic ballasts for fluorescent lamps
Killat, D.; Schmidt, J.; Baumgaertner, A.; Baraniecki, R.; Salzmann, O.;
Proceedings of International Symposium on System-on-Chip, 19-21 Nov. 2003 Page(s):23 – 26.
Measurement and modelling of sensitivity and noise of MOS magnetic field-effect transistors
Killat, D.; v. Kluge, J.; Umbach, F.; Langenheinrich, W.; Schmitz, R.
Sensors and Actuators A 61, 1997.
Störgrößeneliminierende Sensorsignalverarbeitung
Killat, Dirk
Dissertation; Fortschritt-Berichte VDI, Reihe 9, VDI, Düsseldorf, 1997
Sensitivity and Noise of MOS magnetic field effect transistors
Killat, D.; von Kluge, J.; Umbach, F.; Schmitz, R; Langenheinrich, W.
IEEE European Solid-State Device Conference, 1996
A reflected-light receiver with 2 nA sensitivity using CDS and separate low-pass filtering of the input signal at each clock-phase
Killat, D.; Schmitz, R.
Sensors and Actuators A 52, 1996.
Signal processing for magnetic micro torque sensors
Killat, D.; Langheinrich, W.
Sensors and Actuators A 46-47, 1995.