Source Measure Unit
The Keysight B2900A series of SMUs provide best-in-class performance for a modest price. They have broad voltage (210 V) and current (3 A DC and 10.5 A pulsed) sourcing capability, excellent precision (minimum 10 fA/100 nV sourcing and measuring resolution) and possess a superior color LCD graphical user interface. In addition, several task-based viewing modes dramatically improve productivity for test, debug and characterization. The Keysight B2900A series offers unmatched measurement throughput and supports the conventional SMU SCPI command set for easy test code migration. These features improve test productivity and lower the cost of ownership when integrating the SMUs into systems for production test. The Keysight B2900A series consists of four models, the B2901A, B2902A, B2911A and B2912A, differentiated through their measurement specifications and by the number of SMU channels (one or two) they support. This makes it easy to select the exact price/performance point to meet your testing needs.
In addition, multiple instrument remote control options are available at little or no cost: BenchVue, B2900A Graphical Web Interface, B2900A Quick IV Measurement Software, and EasyEXPERT group+. These multiple software control options allow you to choose the solution that best fits your particular application.
Microfluidic Sensor Reader
This sensor reader achieves a 11 bits resolution at up to 100 kHz sampling rate and a sub-resolution noise, for accuracy levels on your sensor measurements down to 0.05% of the full scale and response times down to 0.1 ms.
Sampling rate up to 10 kHz
Resolution: 11 bits (2048 cts)
3 ranges: 0-1 V, 0-5 V, 0-10V
Fully compatible with other Elveflow instruments
Measurement noise below Resolution
Noise reduction function with a 3rd order 60 Hz lowpass filter
Data aquisition (DAQ)
Data aquisition device for general laboratory use in research and development
8 AI (14-Bit, 20 kS/s), 2 AO (5 kS/s/ch), 13 DIO USB Multifunction I/O Device. The USB‑6001 is a low-cost, multifunction DAQ device. It offers analog I/O, digital I/O, and a 32-bit counter. The USB‑6001 provides basic functionality for applications such as simple data logging, portable measurements, and academic lab experiments. The device features a lightweight mechanical enclosure and is bus powered for easy portability. You can easily connect sensors and signals to the USB-6001 with screw-terminal connectivity. The included NI‑DAQmx driver and configuration utility simplify configuration and measurements.
Cleam room tent
• Outside dimensions: 2.460 x 1.860 x 2.650 mm (L x W x H)
• Internal dimensions: 2.400 x 1.800 x 2.200 mm (L x W x H)
• The construction consists of anodized cleanroom aluminum profiles with around 4 supporting profiles on the feet, free-standing and self-standing
• 3 pcs. compact EC filter fan units installed in the ceiling 1.140 x 540 mm with H14 high-performance filter for uniform through-flow of the tent
• The remaining surface of the ceiling is sealed with white, melamine tops glued on all sides
• 4 pcs encapsulated sub-luminaires with 28 W T5 each
• Round PVC lamella curtains, 1.0 mm thick, transparent, antistatic, fixed to the frame with velcro tape, bottom tape, curtains end approximately 200 mm above the floor for air outlet
• Circular wreath plates, color white aluminum (RAL 9006), deck construction reinforced with galvanized sheet steel plates
• The infinitely variable speed controller (Poti 0-10V) of the FFUs and the light switch are located at one of the stator profiles.
Digital Holographic Microscope (DHM)
The topography measuring device DHM R2203 captures the entire topography information of a microscopic sample within a single image recording with a height resolution of down to 0.2nm, which enables 3D representations in real time.
Features:
lenses: 2.5x, 5x, 10x, 20x, 40x, 63x, 100x; 20x amplifier (1MHz); vacuum chamber; MiBots (micromanipulators); Pelton station; vibration damping; clean room tent; Koala Software
Optical microscope
Leica DM800M inspection microscope with fully integrated LED lighting for constant color temperature at all contrasting methods: Bright Field (BF), Dark Field (DF), Differential Interference Contrast (DIC), Polarization Contrast (POL), Oblique Light (OBL)
Features:
lenses: 5x, 10x, 20x, 50x, 100x, macro; digital camera 2048x1536 pixels; 8" cross table; Leica LAS Software
Optical bench
with vibration damped optical table 1.2 x 1.8 m; dark tent; HeNe laser, red, 633 nm, 5 mW, 500: 1 polarized; various optical components (beam guidance system) Owis
Digital oscilloscopes
include Tektronix TDS3054C (4ch, 500MHz, 5GS/s) with current sample TCP A300; Agilent DSO9054H (4ch, 500MHz, 2.5GS/s); DSOX3034A (4ch, 350MHz, 4GS/s)
Function generators
include Tektronix AFG3102C:
2 arbitrary channels (1GS/s); max. 100MHz sine; max. voltage 10V
Digital multimeter
includes Agilent 34411A:
6½ digits; to 10.000 measurements per second; measurement functions: DCV, ACV, DCI, ACI, 2-wire and 4-wire resistance, frequency, period, continuity and diode test capacitance and temperature measurements; extended measurement ranges; data logger with non-volatile memory for 50.000 readings
Various laboratory power supplies
includes Tektonix PWS4721:
voltage 0 → 72Vdc; current 0 → 1.2A; power 86W
The Chair of Micro and nano systems uses the technological possibilities of the clean room of the Fraunhofer IPMS.
More information on this clean room can be found here.
The equipment in Cottbus you can find on the Fraunhofer-IPMS-ISS website [LINK NOCH EINFÜGEN]