BTU overview Close BTU overview
Homepage
Close
Faculty 3
Chair of Polymer-based Lightweight Design Prof. Dr.-Ing. Holger Seidlitz

Scientific publications

TitleAuthor
"Fast Setup Thermal Simulation for Large Scale Additive Manufacturing", presentation at the 79th IIW Annual Assembly 2026, Salzburg (Austria), 12–17 July 2026 (Call for Papers)Seidlitz, H.; Saunders, C.
Numerical Evaluation of Monolithic Aerogel as a Transparent Insulation Layer for Building-Integrated Natural Convection Solar Air Collectors. The 3rd International Online Conference on Energies, 12–15 May 2026 (Abstract)Seidlitz, H.; Kepir, Y.; Ulke-Winter, L.; Kuke, F.
Functional integration of photonic components for (vertical) urban farming. IN Proceedings SPIE Volume 13887, Photonic Technologies in Plant and Agricultural Science III, 138870D, 5 March 2026, DOI: 10.1117/12.3081069Seidlitz, H.; Dreyer, Ch.; Müller, V. C.; Bernaschek, A.; Frahm, M.; Jankowski, B.; Elagroudy, Y.; Koppusch, K.; Fiedler, T.; Eckert, A.; Tatai, T. M.; Borges, R.; Behrendt, F.; Fricke, a.; Schreiner, M.
Bio-based Resins. IN ASM Handbook, Volume 21: Composites, 30 April 2026, ISBN: 978-1-62708-489-5, DOI: 10.31399/asm.hb.v21.a0007096Seidlitz, H.; Köhler, M.
"Fast-Setup Thermal Simulation for Large-Scale Additive Manufacturing – Reduce Waste, Save Time, Improve Quality", poster at the 10th AM Forum, Berlin, 10–11 March 2026Seidlitz, H.; Ulke-Winter, L.; Saunders, C.
Disassembly-optimised Thermoplastic Rivet Connection for Vehicle Interiors. IN: ATZ worldwide, 02–03/2026, Vol. 128, pp. 16–23, DOI: 10.1007/s38311-025-2167-9Seidlitz, H.; Gebhard, J.
Disassembly-optimised thermoplastic rivet connection for vehicle interiors. In: ATZ – Automotive Engineering Journal, 02-03/2026, Vol. 128, pp. 16–23, URL: https://www.springerprofessional.de/atz-automobiltechnische-zeitschrift-2-3-2026/52128164, DOI: 10.1007/s35148-025-2330-zSeidlitz, H.; Gebhard, J.
Erosive wear behaviour of FRP composite pipes under varying impingement angles, impact velocities and flow directions. IN: International Journal of Pressure Vessels and Piping, Vol. 219 Part A, p. 105657, 2026, ISSN: 0308-0161, DOI:
  10.1016/j.ijpvp.2025.105657		Kepir, Y.; Demet, S. M.; Gunoz, A.; Sepetcioglu, H.; Bagci, M.; Kara, M.
Cryogenic Storage Safety: Experimental Evaluation of Insulation Under Extreme Conditions. IN: Journal of Loss Prevention in the Process Industries, Vol. 101, pp. 1059–61, 2026, ISSN: 0950-4230, DOI: 10.1016/j.jlp.2026.105961Seidlitz, H.; Hajhariri, A.; Eberwein, R.; Camplese, D.; Scarponi, G. E.; Cozzani, V.
Phytates as renewable flame retardants for unsaturated polyester resins. IN: Polymer Degradation and Stability (submitted)Seidlitz, H.; Köhler, M.; Kleine, A.; Kürsten, J.; Steffen, S.; Kuke, F. 
  

 

TitleAuthor
"Material and Geometry Optimisation for Compact High-Temperature Heat Exchangers", presentation at the SpreeTec neXt - 2025 industry roundtable, Cottbus, 26 November 2025Seidlitz, H.; Kepir, Y.; Ulke-Winter, L.; Kuke, F.
"Fast-Setup Thermal Simulation for Large-Scale AM: Reduce Waste, Save Time, Improve Quality", presentation at the SpreeTec neXt - 2025 industry roundtable, Cottbus, 26 November 2025Seidlitz, H.; Saunders, C.;
"Thermography-based measurement system for the digital recording and quality control of winding patterns in the wet winding process", presentation at the SpreeTec neXt industry roundtable – 2025, Cottbus, 26 November 2025Seidlitz, H.; Rüppel, G.; Ulke-Winter, L., Kuke, F.; Dorn, O.
"Insights into the manufacture of Type 4 hydrogen pressure vessels using a practical example", presentation at the SpreeTec neXt - 2025 industry group meeting, Cottbus, 26 November 2025Seidlitz, H.; Dorn, O.;
"Design of Type 4 hydrogen pressure vessels", presentation at the SpreeTec neXt – 2025 industry roundtable, Cottbus, 26 November 2025Seidlitz, H.; Demmig, S.;
"The Interconnection of the TransHyDE and SpreeTec neXt Hydrogen Flagship Projects – Current Status and Outlook", presentation at the SpreeTec neXt – 2025 industry roundtable, Cottbus, 26 November 2025Seidlitz, H.; Ost, L.; Demmig, S.; Dorn, O.; Yekani, S.; Cotton, A.; Liu, Y.; Rüppel, G.; Kuke, F.; Ulke-Winter, L.; Patzer, E.
Durability enhancement in aged composite pipes: Low-velocity impact performance of basalt fibre-reinforced polymer modified by graphene nanoplatelets. IN: Journal of Composite Materials, 2025, ISSN: 0021-9983, DOI:10.1177/00219983251403123Kepir Y, Gunoz A, Sepetcioglu H, Kara M. 
"TransHyDE/Mukran – Development of large-scale high-pressure tanks for mobile and stationary applications", presentation at the CU Project Forum, Augsburg, 12 November 2025Seidlitz, H.; Ost, L.; Demmig, S.; Dorn, O; Yekani, S.; Cotton, A.; Liu, Y.; Rüppel, G.; Kuke, F.; Ulke-Winter, L.; Patzer, E.
"Cross-scale material and component testing of composites – from pure resin to 700 bar CFRP pressure tanks", presentation at the 6th Berlin-Brandenburg Lightweight Construction Network Meeting, Berlin, 11 November 2025Seidlitz, H.; Nielow, D.; Kuke, F.
“Mukran – High-pressure tanks and mobile solution for trimodal hydrogen transport”, poster at the TransHyDE General AssemblySeidlitz, H.; Ulke-Winter, L.; Ost, L.; Dorn, O.; Demmig, S.; Yekani, S.; Rüppel, G.; Cotton, A.; Liu, Y.; Kuke, F.; Patzer, E.
"Geometric Optimisation and Advanced Material Integration for Enhanced Thermal Performance of Compact Cross-Flow Heat Exchangers in High-Temperature Applications", poster at The 6th International Electronic Conference on Applied Sciences (ASEC 2025), 9–11 December 2025, URL: https://sciforum.net/paper/view/27631Seidlitz, H.; Kepir, Y.; Ulke-Winter, L.; Kuke, F.
"Influence of Internal Pressure Regulation During Filament Winding on Failure Mechanism in Type 4 Pressure Vessels: A Case Study", presentation at the 11th International Conference on Hydrogen Safety ICHS 2025, Seoul (South Korea), 23 September 2025 (paper in the conference proceedings)Seidlitz, H.; Popiela, B.; Günzel, S.; Oktaviany, J.; Widjaja, M. P.; Mair, G. W. 
"Development of a storage and transport system for high-pressure hydrogen in the Mukran project", online presentation as part of the 7-Minutes-Slam Hydrogen Flagship Projects (4th session), 9 September 2025Seidlitz, H.; Ost, L.; Dorn, O.; Rüppel, G.; Yekani, S.; Demmig, S.; Lamann, A.; Kuke, F.; Ulke-Winter, L.; Patzer, E.
"Lightweight Heat Exchanger Design Using Graphene-Reinforced Ceramics: A Comparative Study of Dimensional and Material Effects", poster presented at The 4th International Online Conference on Materials (IOCM 2025 Conference), 3–5 November 2025, URL: https://sciforum.net/paper/view/25988Seidlitz, H.; Kepir, Y.; Ulke-Winter, L.; Kuke, F.
Embedding of Fibre Optic Sensors Under Industrial Conditions and Distributed Strain Sensing in Type 4 Composite Pressure Vessels. IN: Proceedings of ICCM24, Baltimore (USA), 4–8 August 2025, pp. 3710–3717, (Contribution to the conference proceedings of the 24th International Conference on Composite Materials)Seidlitz, H.; Popiela, B.; Schukar, M.; Breithaupt, M.; Günzel, St.; Mair, G. W.; Krebber, K.
Repeatable testing of a cryogenic storage tank with variable insulation material in fire-like conditions. IN: Cryogenics 2025. Proceedings of the 18th IIR International Conference on Cryogenics, Prague (Czech Republic), 7–11 April 2025, DOI: 10.18462/iir.cryo.2025.0007Seidlitz, H.; Eberwein, R.; Hajhariri, A.; Otremba, F.; Scarponi, G. E.; Camplese, D.; Cozzani, V.
A Comprehensive Numerical Study of the Behaviour of an LH2 Storage Tank in the Event of a Fire. IN: Chemical Engineering Transactions. Vol. 116, 2025, pp. 679–684, DOI: 10.3303/CET25116114, ISBN: 979-12-81206-18-2, ISSN: 2283-9216 (presented at the 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries, 2025)Seidlitz, H.; Hajhariri, A.; Eberwein, R.; Otremba, F.; Scarponi, G. E.; Camplese, D.; Cozzani, V.
"Mat-o-Lab Use Case 'Polymers'", presentation as part of the BAM - Fraunhofer Materials LLM days, Würzburg, 3 July 2025, URL: https://www.materials.fraunhofer.de/de/strategische-initativen/materials-data-space-/aktuelles-/sym-po-si-um--mat-o-lab-llm-days-.htmlSeidlitz, H.; Wickmann, R.
"Objectives and challenges of integrating fibre optic sensors in the pultrusion process – I-FOSENS project", presentation at the CAE2025 conference, Sosnówka (Poland), 6 June 2025Seidlitz, H.; Osiecki, T.; Więckowski, J.; Konarzewski, M.; Lies, C.; Löpitz, D.; Mądry, M.; Moczko, P.; Panowicz, R.; Sbriglio, C.; Szczupak, B.
"The TransHyDE flagship project, sub-project Mukran – Research on innovative storage and transportation solutions for hydrogen", presentation as part of the Wielkopolska Hydrogen Platform (online), 16 May 2025Seidlitz, H.; Ost, L.; Yekani, S.; Demmig, S.; Dorn, O.; Rüppel, G.; Lamann, A.; Kuke, F.; Ulke-Winter, L.; Osiecki, T.; Patzer, E.
Not Only Lightweight, But Also Recyclable – Mono-Material Replaces Multi-Material Composites in Car Interiors. IN: Plastics Insight 3/2025, Carl Hanser Verlag, Munich, pp. 13–17, ISSN: 2941–4202Seidlitz, H.; Gebhard, J.; Stamp, B.
"Near Net Shape Technologies for the Production of Plastic Components", presentation as part of Future Technologies Across Borders, Ślęza/Wrocław (Poland), 11 April 2025Seidlitz, H.; Ulke-Winter, L.; Saunders, C.
"Mukran – High-pressure tanks for hydrogen storage in trimodal transport", poster at the TransHyDE final conference, Berlin, 25–27 March 2025Seidlitz, H.; Ulke-Winter, L.; Ost, L.; Yekani, S.; Demmig, S.; Dorn, O.; Rüppel, G.; Lamann, A.; Kuke, F.; Patzer, E.
"Development of high-pressure tanks for hydrogen storage and a transport solution within the BMBF flagship project TransHyDE/Mukran", presentation at the TransHyDE final conference, Berlin, 27 March 2025Seidlitz, H.; Ulke-Winter, L.; Ost, L.; Yekani, S.; Demmig, S.; Dorn, O.; Rüppel, G.; Lamann, A.; Kuke, F.; Patzer, E.
SH-SSQ as a modifier for superior mechanical properties and improved plasticity of 3D printed PLA. IN: Scientific Reports 15, article number 7779, 5 March 2025, ISSN: 2045-2322, DOI: 10.1038/s41598-025-86365-5Seidlitz H.; Osiecki, T.; Sztorch, B.; Przekop, R.E.; Pakuła, D.; Frydrych, M.; Romańczuk-Ruszuk, E.
Not only lightweight, but also recyclable – monomaterial replaces multi-material composites in automotive interiors. IN: Kunststoffe 03/2025, pp. 18–21, Carl Hanser Verlag, MunichSeidlitz H.; Gebhard, J.; Stamp, B.
Application of the Incremental Hole-Drilling Method for Residual Stress Determination in Type 4 Pressure Vessels. IN: Materials Testing, 2025. DOI: 10.1515/mt-2024-0328Seidlitz H.; Popiela, B.; Günzel, S.; Sklorz, C.; Widjaja, M. P.; Mair, G. W.
Impact of Internal Pressure Control During Manufacturing on Residual Stresses and Safety Performance of Type 4 Pressure Vessels. IN: Composites Part C: Open Access, Vol. 17, March 2025, ISSN: 2666-6820, DOI: 10.1016/j.jcomc.2025.100581Seidlitz, H.; Popiela, B.; Günzel, S.; Schukar, M.; Mair, G. W.; Krebber, K.
Chemical method of doping Inconel 713C powder with rhenium for 3D printed manufacturing. Influence of rhenium dopants on microstructural changes. IN: Archives of Civil and Mechanical Engineering, Vol. 25, article number 102, 28 February 2025, ISSN: 2083-3318, DOI: 10.1007/s43452-025-01159-wSeidlitz, H.; Cieślik, I.; Duchna, M.; Zasada, D.; Kwaśny, M.; Adamczyk-Cieślak, B.
Flax fibre-reinforced PET-G composites with improved interfacial adhesion. IN: Polimery, Vol. 70, No. 2, 113–123. 5 March 2025, ISSN: 2957-0263, DOI: 10.14314/polimery.2025.2.4Seidlitz, H.; Hartung, D.; Osiecki, T.; Sztorch, B.; Przekop, R.E.; Kazimierczuk, M.
Bio-based Resins. IN: ASM Composites Handbook (under review)Seidlitz, H.; Köhler, M.
"Reusing and recycling of composite wind turbine blades. A review of current practices and prospects. Part 5. New industrial projects. Wind energy in China" IN: Przemysł Chemiczny 01/2025 Vol. 104, Iss. 1, pp. 142–152, DOI: 10.15199/62.2025.1.11Seidlitz, H.; Köhler, M.; Błędzki, A.; Urbaniak, M.; Demski, S.; Boczkowska, A.
"Reusing and recycling of composite wind turbine blades. A review of current practices and prospects. Part 4. Novel academic research" IN: Przemysł Chemiczny 01/2025 Vol. 104, No. 1, pp. 133–141, DOI: 10.15199/62.2025.1.10Seidlitz, H.; Köhler, M.; Błędzki, A.; Urbaniak, M.; Demski, S.; Boczkowska, A.

 

TitleAuthor
Improving the processing and mechanical properties of 3D-printable biocomposites based on polylactide, sedimentary rock and natural beeswax. IN: Polymer Bulletin, 29 December 2024, DOI: 10.1007/s00289-024-05614-1Seidlitz H.; Osiecki, T.; Sztorch, B.; Romanczuk-Ruszuk, E.; Głowacka, J.; Kustosz, M.; Jakubowska, P.; Przekop, R. E.
Optical Tape Detection Using an IR Camera to Create a Digital Twin of Rotationally Symmetrical Wet-Wound FRP Components. IN: Journal of Engineering 360. Volume 1, no 1/24, November 2024, pp. 46–57, DOI: 10.5604/01.3001.0054.8851Seidlitz, H.; Rüppel, G.; Dorn, O.; Kuke, F.; Ulke-Winter, L.
Improving the processing and mechanical properties of 3D-printable biocomposite based on polylactide, sedimentary rock, and natural beeswax. IN: Polymer Bulletin (submitted)Seidlitz H.; Osiecki, T.
"Manufacture of fibre-wound high-pressure vessels – challenges along the process chain", presentation at the SpreeTec neXt industry roundtable – 2024, Cottbus, 25 November 2024Seidlitz H.; Dorn, O.; Demmig, S.
"Development of plastic-based moulding tools (rapid tooling)", presentation at the SpreeTec neXt - 2024 industry roundtable, Cottbus, 25 November 2024Seidlitz H.; Saunders, C.; Wickmann, R.; Rabiega, T.
Non-Combustible MLI-Based Insulation Behaviour Under Fire Conditions – Experimental and Numerical Investigation. IN: Process Safety and Environmental Protection. Volume 193, Jan 2025 (Online: 13 Nov 2024), pp. 403–420, DOI: 10.1016/j.psep.2024.11.037, ISSN: 0957-5820, URL: https://www.sciencedirect.com/science/article/pii/S0957582024014502Seidlitz, H.; Hajhariri, A.; Eberwein, R.; Otremba, F.; Scarponi, G. E.; Camplese, D.; Cozzani, V.
Study of the impact of spacers on the thermal degradation process of MLI-based insulation in fire conditions. IN: Journal of Loss Prevention in the Process Industries. Volume 92, December 2024, DOI: 10.1016/j.jlp.2024.105461, ISSN: 0950-4230, URL: https://www.sciencedirect.com/science/article/pii/S0950423024002195Seidlitz H.; Hajhariri, A.; Eberwein, R.; Perrone, L. P.; Cozzani, V.; Otremba, F.
"Impact of the Initial Loading on the Performance of Type 4-CPVs", poster presented at the 4th Berlin-Brandenburg Lightweight Construction Network Meeting, Berlin, 1 October 2024Seidlitz H.; Popiela, B.; Günzel, S.; Mair, G. W.
"Experimental investigations into the influence of manufacturing-induced residual stresses on the safety of Type IV pressure vessels", presentation at the AVK Working Group – Hydrogen Pressure Tanks, Frankfurt am Main, 26 September 2024Seidlitz H.; Popiela, B.; Günzel, S.; Mair, G. W.
"Adjustable Support Structure for Optical Sensors, ASSOSS - Thermal", presentation at the European Space Thermal Engineering Workshop, Noordwijk (NL), 9 October 2024, URL: https://indico.esa.int/event/520/contributions/9893/Seidlitz, H.; Saunders, C.; Sagaria, S.
Development of a spherical high-pressure tank for hydrogen storage in mobile and stationary applications IN: Energy Technology, 23 July 2024, DOI: 10.1002/ente.202300942, ISSN: 2194-4288Seidlitz, H.; Ost, L.; Ulke-Winter, L.; Kuke, F.
"Correlation between Electrodes Surface State and Dynamic Resistance during Resistance Spot Welding of 5182 Aluminium Alloy", presentation at the 77th IIW Annual Assembly and International Conference in Welding and Joining 2024, Rhodes (Greece), 10 July 2024Seidlitz, H.; Nikitin, A.; Turabov, D.; Evdokimov, A.; Ossenbrink, R.; Michailov, V.
Chemical Method of Doping Inconel 713C Powder with Rhenium for 3D-Printed Manufactured Microstructure Effects and Hardness Changes IN: Materials Processing Tech.Seidlitz, H.; Cieślik, I.; Adamczyk, B.; Zasada, D.; Płocińska, M.; Kwaśny, M.; Duchna, M.
Study of the Impact of Spacers on the Thermal Degradation Process of MLI-based Insulation in Fire Conditions. IN: Proceedings of the 15th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2024). pp. 744–755, Naples (Italy), 2024, DOI: 10.5281/zenodo.12515711 URL: https://zenodo.org/records/12621001 (full publication)Seidlitz, H.; Hajhariri, A.; Eberwein, R.; Camplese, D.; Scarponi, G. E.; Cozzani, V.; Otremba, F.
"Recycling of sandwich structures, state of the art and outlook", presentation as part of the CU Innovation Day "Sandwich technologies in the Berlin metropolitan region", Berlin, 27 June 2024Seidlitz, H.; Köhler, M.; Förster, T.; Dreyer, Ch.; Hartmann, L.; Zahel, M.
"Dynamic resistance measurements for predicting electrode wear during resistance spot welding of aluminium", presentation at the 12th International Conference on Research and Testing Laboratories, Quality Systems in the European Union, Świeradów Zdrój (Poland), 13 June 2024Seidlitz, H.; Ossenbrink, R.; Turabov, D.; Nikitin, A.
"Optical quality control in the wet winding process using thermography", presentation at the 12th International Conference on Research and Testing Laboratories, Quality Systems in the European Union, Świeradów Zdrój (Poland) 13 June 2024Seidlitz, H.; Rüppel, G.
"Selective Laser Melting of Pure Copper (Cu-ETP)", poster, Additive 2024 – 4th Symposium on Materials and Additive Manufacturing, Bremen/Berlin, 12–14 June 2024Seidlitz, H.; Miah, K.; Kloshek, A.; Ossenbrink, R.
"Effects of extended shielding gas coverage on component contour accuracy in Wire Arc Additive Manufacturing", Poster, Additive 2024 – 4th Symposium on Materials and Additive Manufacturing, Bremen/Berlin, 12–14 June 2024Seidlitz, H.; Kehm, C.; Wasilewski, E.; Miah, K.; Ossenbrink, R.
"Hydrogen Storage Tanks – Manufacturing and Testing", presentation at ILA 2024, Berlin, 7 June 2024Seidlitz, H.; Köhler, M.
"Application-oriented inspection concept for non-destructive testing of FKV structures using the active thermography method", poster and short paper presented at the 2024 Annual Conference of the German Society for Non-Destructive Testing (DGZfP), Osnabrück, 6–8 May 2024, URL: https://www.ndt.net/?id=29504Seidlitz, H.; Müller, M.; Nielow, D.; de Miguel Palacio, A.; Rüppel, G.
Food For Future: Exploring Cutting-Edge Technology and Practices in Vertical Farming. IN: Sustainable Cities and Society. Volume 106, 1 July 2024, DOI: 10.1016/j.scs.2024.105357, ISSN: 2210-6707, URL: https://www.sciencedirect.com/science/article/pii/S2210670724001859Seidlitz, H.; Dreyer, Ch.; Erekath, S.; Schreiner, M.
"Digital twin of wound components in the wet winding process", presentation as part of the AVK Experts Task Force “AVK-Thermoplastic Composites Tubes & Profiles”, Frankfurt am Main, 21 March 2024Seidlitz, H.; Ulke-Winter, L.; Rüppel, G.; Dorn, O.; Kuke, F.
"Modelling of the residual stresses in type 4 pressure vessels for hydrogen storage" Presentation and publication as part of the European PhD Hydrogen Conference 2024 (EPHyC2024), Ghent (Belgium), 20–22 March 2024, URL: on ResearchGateSeidlitz, H.; Popiela, B.; Günzel, S.; Mair, G. W.
"Sensorised lightweight systems using printed electronics", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 15 March 2024Seidlitz, H.; Ambrosio, M.
"Near-final-contour manufacturing technologies for high-performance composites", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 15 March 2024Seidlitz, H.; Wickmann, R.; Saunders, C.; Rabiega, T.
"Digitalisation in joining technology and additive manufacturing", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 15 March 2024Seidlitz, H.; Wasilewski, E.
"Digital Twin and Online Monitoring in Plastic-Based Manufacturing Processes", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 15 March 2024Seidlitz, H.; Rüppel, G.
"BMBF flagship project TransHyDE/Mukran, mobile hydrogen storage", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 15 March 2024Seidlitz, H.; Ost, L.
"Innovation Centre for Photonic Materials and Production Technology", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 14 March 2024Seidlitz, H.; Ossenbrink, R.
"Lightweight construction as a key technology with the SpreeTec neXt structural change cluster project", presentation at the 18th Cottbus Lightweight Construction Workshop, Cottbus, 14 March 2024Seidlitz, H.
"Polymer Matrix Composite (PMC) Material Testing Method for H2 Pressure Vessels", poster presented at the Energy Theme Day organised by the Federal Institute for Materials Research and Testing (BAM), Berlin, 5 March 2024Seidlitz, H., Bach, C.; Trappe, V.
"Sustainability and Circular Economy in Carbon Fibre-Reinforced Plastics" – Conference Paper ICSMEA 2024 IN: Materials Circular Economy, Volume 6, article number 26, 15 May 2024, DOI: 10.1007/s42824-024-00111-2Seidlitz, H.; Hannan, A.; Hartung, D.; Kuke, F.; Ambrosio, M.; Müller, M.
"Reusing and recycling of composite wind turbine blades. A review of current practices and prospects. Part 1. Academic research" IN: Przemysł Chemiczny 02/2024 Vol. 103, Iss. 2, pp. 225–233, DOI: 10.15199/62.2024.2.2Seidlitz, H.; Köhler, M.; Błędzki, A.; Urbaniak, M.; Adamcio, A.; Sobczyk, M.; Demski, S.; Boczkowska, A.
"Reusing and recycling of composite wind turbine blades. A review of current practices and prospects. Part 2. Industrial activities" IN: Przemysł Chemiczny 02/2024 Vol. 103, No. 2, pp. 234–240, DOI: 10.15199/62.2024.2.3Seidlitz, H.; Köhler, M.; Błędzki, A.; Urbaniak, M.; Adamcio, A.; Sobczyk, M.; Demski, S.; Boczkowska, A.
"Reusing and recycling of composite wind turbine blades. A review of current practices and prospects. Part 3. Various proposals offered by small and medium-sized enterprises" IN: Przemysł Chemiczny 02/2024 Vol. 103, No. 2, pp. 241–250, DOI: 10.15199/62.2024.2.4Seidlitz, H.; Köhler, M.; Błędzki, A.; Urbaniak, M.; Adamcio, A.; Sobczyk, M.; Demski, S.; Boczkowska, A.
"Design of lightweight high-pressure tanks for hydrogen storage", presentation, Hydrogen Solutions Forum, E-world, Essen, 21 February 2024Seidlitz, H.
"Additive Manufacturing of Optimised Microreactors and Heat Exchangers to Increase Energy Efficiency", presentation at the German-Polish Welding Seminar, Cottbus, 20 February 2024Seidlitz, H.; Miah, K.; Kloshek, A.; González-Castaño, M.; Stolz, K.; Ossenbrink, R.; Michailov, V.
"Enhancing Laser Beam Welding Quality Simulation-based Strategies to Reduce Distortion and Cold Cracking", presentation at the German-Polish Welding Seminar, Cottbus, 20 February 2024Seidlitz, H.; Wasilewski, E.; Ossenbrink, R.; Michailov, V.
"Breaking down barriers with key technologies – sustainable development of a cross-border network of expertise in knowledge and technology transfer in the field of lightweight construction geared towards practical applications" – presentation of project results", as part of a presentation at the 4th conference: “Cooperation between science and business in production engineering” (7–8 December 2023), Zielona Góra (Poland)Seidlitz, H.; Dziedzic, F.; Fleischer, W.; Wickmann, R.
Fitting the round into the square – Mobile spherical hydrogen storage tanks to ensure comprehensive energy supply. IN: CU reports #01 | 2024, pp. 24–25, Berlin, URL: https://digitalmagazin.b4bschwaben.de/de/profiles/610b21560ff9/editions/938f18855a9b7f4385ee/pages/page/13Seidlitz, H.
"Sustainability and circular economy in carbon fibre reinforced plastics", presentation at the International Conference on Sustainable Materials for Engineering Applications (ICSMEA 2024), Chennai (India), 2 February 2024Seidlitz, H.; Hannan, A.
“Application-oriented inspection concept for large-scale composite components using active thermography NDT”, presentation, CU Innovation Day “Structural Health Monitoring meets Non-Destructive Testing”, Zurich, 31 January 2024Seidlitz, H.; Nielow, D.; Müller, M.
Efficient recycling pathway of bio-based composite polyurethane foams via sustainable diamine. IN: Ecotoxicology and Environmental Safety. Volume 269, 1 January 2024, DOI: 10.1016/j.ecoenv.2023.115758, ISSN: 0147-6513, URL: https://www.sciencedirect.com/science/article/pii/S0147651323012629Seidlitz, H.; Dreyer, Ch.; Steffen, S.; Recupido, F.; Lama, G. C.; Russo, V.; Lavorgna, M.; De Luca Bossa, F.; Silvano, S.; Boggioni, L.; Verdolotti, L.

 

TitleAuthor
"Optical tape detection using an IR camera to create a digital twin of rotationally symmetrical wet-wound FRP components", presentation at the "Modern Technologies in Industry" conference, Gorzów Wielkopolski (Poland), 8–9 December 2023Seidlitz, H.; Ulke-Winter, L.; Rüppel, G.; Dorn, O.; Kuke, F.
Investigations of technical challenges in compounding of recycled carbon fibres. IN: Zarzadzanie Przedsiebiorstwem. Enterprise Management, Volume 26, Number 2, 2023, pp. 7–12, DOI: 10.25961/ent.manag.26.01.03, ISSN: 1643-4773, URL: https://zp.ptzp.org.pl/ZPEM_26_2-2023.htmlSeidlitz, H.; Hannan, A.; Krenz, J.; Müller, M.
"Recycling of CFRP components: opportunities, risks and market penetration", presentation at the 6th Strategy Advisory Board meeting of the Lightweight Construction Initiative, Berlin, 27 September 2023Seidlitz, H.
"Practical inspection method for large composite structures using thermography", presentation at the 19th Schwarzheide Plastics Colloquium, Schwarzheide, 21 September 2023Seidlitz, H.; Nielow, D.
"Automated Fibre Placement at the Chair of Polymer-based Lightweight Design", presentation as part of the Erasmus+ Blended Intensive Programme "Fatigue Lifetime Prediction and Fracture Analysis of Materials and Structures", Wrocław (Poland), 17 September 2023Seidlitz, H.; Schiefelbein, A.
"Challenge in the design, development and manufacturing of a custom CFRP handlebar for a Paralympic athlete (Paralympic Games 2024, Paris)", presentation as part of the Erasmus+ Blended Intensive Programme "Fatigue Lifetime Prediction and Fracture Analysis of Materials and Structures", Wrocław (Poland), 17 September 2023Seidlitz, H.; Dorn, O.
"Design and optimisation of an adaptive lightweight rotor blade", presentation as part of the Erasmus+ Blended Intensive Programme "Fatigue Lifetime Prediction and Fracture Analysis of Materials and Structures", Wrocław (Poland), 15 September 2023Seidlitz, H.; Ost, L.
"Bio-based lightweight materials/sustainable composites", presentation as part of the Erasmus+ Blended Intensive Programme "Fatigue Lifetime Prediction and Fracture Analysis of Materials and Structures", Wrocław (Poland), 15 September 2023Seidlitz, H.; Hannan, A.
"Function-integrated lightweight construction technologies for sustainable and decentralised energy supply", presentation at Husum Wind in the section: "Model region for the energy transition – learning from Lusatia", Husum, 12 September 2023Seidlitz, H.; Ambrosio, M.
Material and Load Path Appropriate Joining Techniques for FRP/Metal Hybrid Structures. IN: Welding – Materials, Fabrication Processes, and Industry 5.0, 9 September 2023, DOI: 10.5772/intechopen.1002239, URL: https://www.intechopen.com/online-first/1149663Seidlitz, H.; Ulke-Winter, L.; Ost, L.; Kuke, F.
"New manufacturing technologies for components and Systems in decentralised energy technology", presentation as part of the Circular Bioeconomy Cluster Week (T+I Cluster Meeting), BTU Cottbus-Senftenberg, Cottbus, 30 August 2023Seidlitz, H.
Simulation of Composites' Heating. IN: Kunststoffe international 04/2023, Vol. 113, Carl Hanser Verlag, Munich, pp. 60–64, ISSN: 1862–4243, URL: https://en.kunststoffe.de/a/article-4771398Seidlitz, H.; Michailov, V.; Doynov, N.; Ost, L.; Shapovalov, N.; Kuke, F.; Ambrosio, M.
Development and analysis of a joining strategy for FKV/metal mixed joints based on the CMT pinch welding technique. IN: Joining Plastics Vol. 17, 1/ 2023, pp. 28–35, URL: https://www.joining-plastics.info/artikel/entwicklung-und-analyse-einer-fuegestrategie-fuer-fkvmetall-mischverbindungen-auf-basis-der-cmt-pinschweisstechnikSeidlitz, H.; Michailov, V.; Doynov, N.; Ost, L.; Shapovalov, N.; Kuke, F.; Ambrosio, M.
"Lightweight composite structures for hydrogen storage applications", presentation as part of the "Webinar series on green hydrogen", online 29 March 2023, URL: https://youtube.com/live/LISiixyyOtk?feature=shareSeidlitz, H.; Ambrosio, M.
Key technology: lightweight construction "Development of materials and construction methods for hydrogen-based mobility" (Game-changer technology: Lightweight Design "Development of materials and construction methods for hydrogen-based mobility"), online presentation as part of the "H2 Colloquium of the competence centre H2SAFETY@BAM", Berlin, 15 February 2023Seidlitz, H.; Nielow, D.
Simulating the heating of composites. IN: Kunststoffe 02/2023, Carl Hanser Verlag, Munich, pp. 66–70, URL: https://www.kunststoffe.de/a/article-3363044Seidlitz, H.; Michailov, V.; Doynov, N.; Ost, L.; Shapovalov, N.; Kuke, F.; Ambrosio, M.
"Influence of manufacturing-induced imperfections on the operational safety of composite H2 pressure vessels – A quick overview and status update", presentation at Trustworthy Hydrogen, Cottbus, 17 January 2023Seidlitz, H.; Dorn, O.

 

TitleAuthor
"Recycling and design for recycling of rotor blades and high-pressure gas storage tanks", presentation at the 12th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Lubniewice (Poland), 8 December 2022Seidlitz, H.; Ost, L.
"Development of simulation models for structural design and weight optimisation of a mobile lightweight crane", presentation at the 12th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Lubniewice (Poland), 7 December 2022Seidlitz, H.; Saunders, C.
"Key technologies: where are we heading? – Current developments in the field of application-oriented lightweight construction", presentation at the 12th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Lubniewice (Poland), 7 December 2022Seidlitz, H.
"Overcoming borders with key technologies – a retrospective", presentation as part of the 12th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Lubniewice (Poland), 7 December 2022Seidlitz, H.; Wickmann, R.
Substitution of metallic shear panels in vehicle construction through the integration of FKV shells using joining technology. Final report on project IGF No. 20649 BR, DVS No. 11.3195, meeting of Technical Committee FA 11 – Plastic Joining of the Research Association for Welding and Related Processes e. V. of the DVS – German Association for Welding and Related Processes e. V., 23 November 2022, onlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"Current work on small wind turbines, recycling and Power-to-X", presentation as part of the 30th Wind Energy Days, Forum 23 B – RDRWind e.V., Linstow, 9 November 2022Seidlitz, H.; Ost, L.
"Winding and Automated Fibre Placement", online lecture as part of the 9th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 4 November 2022Seidlitz, H.; Demmig, S.
"Injection Moulding, Extrusion, Pressing", online lecture as part of the 9th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 4 November 2022Seidlitz, H.
"Prepreg Technologies, Laminating, Autoclave Technology", online lecture as part of the 9th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 4 November 2022Seidlitz, H.; Demmig, S.
"Overview of Basic Processes", online lecture as part of the 9th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 4 November 2022Seidlitz, H.
"Material and construction method development for hydrogen-based mobility", online lecture as part of the event "Hydrogen potential for mobility in Berlin-Brandenburg" organised by the Berlin-Brandenburg Energy Technology Cluster, 17 October 2022Seidlitz, H.; Nielow, D.
"Process-integrated fabrication and integration of hybrid multilayer composites with high functional density", 28th Dresden Vacuum Technology Colloquium (NDVaK), Dresden, 5 October 2022Seidlitz, H.; Plettig, A.; Kuke, F.
"Replacement of metal shear fields in vehicle construction through the joining-based integration of FKV shells", DVS Congress 2022, Koblenz, 19–21 September 2022Seidlitz, H.; Ost, L.; Kuke, F.; Ambrosio, M.; Shapovalov, O.; Doynov, N.
"Fast process chains for intelligent lightweight solutions in aviation", ILA, Schönhagen Airfield, 23 June 2022Seidlitz, H.
"Fast processes for highly integrated lightweight components", Conference "Kompozyty w PS/ZUT", West Pomeranian University of Technology in Szczecin, Szczecin (Poland), 13 June 2022Seidlitz, H.
"From Monomers to Components - Sustainable Lightweight Technologies for the Energy Transition", Vanguard Initiative Regional Conference 2022: Accelerate the process: Hydrogen as the new fuel for growth, Krakow/Malopolska (Poland), 7 June 2022Seidlitz, H.
"Development of the Green Patch in German-Australian cooperation", Lusitza Trans Connect (LuTraCo) kick-off event, Session 2: Reclamation, Finsterwalde, 24 May 2022Seidlitz, H.; Grätz, Ch.; Stiehler, F.; Hankamer, B.; Zaplata, M.; Müller, M.
"Additive Manufacturing of Moulding Tools – Alternative Production Options for Toolmaking and Small-Batch Production" LEHVOSS Polymer Technology Conference (PTC) 2022, Frankfurt am Main, 19 May 2022Seidlitz, H.; Wickman, R.; Krenz, J.; Losansky, S.
"Design of high-load-bearing lightweight structures using fibre-reinforced composites", LEHVOSS Polymer Technology Conference (PTC) 2022, Frankfurt am Main, 19 May 2022Seidlitz, H.; Köhler, M.
"Calculation and optimisation of fibre-reinforced polymer composites", online presentation as part of the 7th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 8 April 2021Seidlitz, H.; Demmig, S.
"Introduction to the Finite Element Method", online lecture as part of the 7th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 8 April 2021Seidlitz, H.; Ulke-Winter, L.
"Examples of the design of lightweight construction systems", online lecture as part of the 7th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 7 April 2022Seidlitz, H.; Ulke-Winter, L.
"Overview: Design of fibre-reinforced
plastic composites", online lecture as part of the 7th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 7 April 2022		Seidlitz, H.; Ulke-Winter, L.
"Design guidelines relevant to lightweight construction", online lecture as part of the 7th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 7 April 2022Seidlitz, H.
"Novel continuous recycling process for the holistic recovery of CFRP", online lecture for the Recycling Working Group – Recycling of Composite Materials of the AFBW – Alliance for Fibre-Based Materials Baden-Württemberg e.V., Stuttgart, 5 April 2022Seidlitz, H.; Hannan, A.; Weibert, E.; Fechner, J.
Substitution of metallic shear panels in vehicle construction through the integration of CFRP shells using joining techniques. Progress report on project IGF No. 20649 BR, DVS No. 11.3195, meeting of Technical Committee FA 11 – Plastic Joining of the Research Association for Welding and Related Processes e. V. of the DVS – German Association for Welding and Related Processes e. V., 5 April 2022, onlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"From Monomer to Component", presentation at the CU Innovation Day: Lightweight Construction Technologies in the Greater Berlin Area, Berlin, 31 March 2022Seidlitz, H., Nielow, D.
Replacement of metal shear panels in vehicle construction through the integration of FKV shells using joining techniques. Report on the 5th meeting of the project steering committee for project IGF No. 20649 BR, DVS No. 11.3195, 30 March 2022, Cottbus, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"CFRP Recycling: An Efficient and Sustainable Approach", online keynote presentation at the 1st meeting of the UAG Recycling Hydrogen Technologies working group of the Circular Economy Working Group at e-mobil BW GmbH, Stuttgart, 17 February 2022Seidlitz, H.; Hannan, A.; Weibert, E.; Fechner, J.

 

TitleAuthor
"An overview of test methods to determine the in-plane shear properties of fibre-reinforced plastics (FRP)", online presentation as part of the 5th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 9 December 2021Seidlitz, H; Yellur, M.
Replacement of metallic shear panels in vehicle construction through the integration of FRP shells using joining techniques. Report on the 4th meeting of the project steering committee for project IGF No. 20649 BR, DVS No. 11.3195, 25 November 2021, Cottbus, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
Substitution of metallic shear panels in vehicle construction through the joining-based integration of FKV shells. Progress report on project IGF No. 20649 BR, DVS No. 11.3195, meeting of Technical Committee FA 11 – Plastic Joining of the Research Association for Welding and Related Processes e. V. of the DVS – German Association for Welding and Related Processes e. V., 23 November 2021, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"Industrial Application of Fibre-Reinforced Plastics", online presentation as part of the 4th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 19 November 2021Seidlitz, H.; Müller, M.
"Difference between structural and material lightweight construction, comparison of construction methods", online lecture as part of the 4th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 19 November 2021Seidlitz, H.; Ulke-Winter, L.
"Lightweight Pressure Vessels", online lecture as part of the 4th workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 18 November 2021Seidlitz, H.; Ulke-Winter, L.
Adaptive GFRP rotor blades and additive manufacturing of the moulding tools. IN: Zarzadzanie Przedsiebiorstwem - Enterprise Management, Vol. 24, No. 1-2 / 2021, pp. 15-18, DOI: 10.25961/ent.manag.24.01.03Seidlitz, H.; Ulke-Winter, L.; Ost, L.; Kuke, F.; Yellur, M.; Krenz, J.
"Function-integrated 3D printing with printed electronics", 18th Schwarzheide Plastics Colloquium, Schwarzheide, 29 September 2021Seidlitz, H.; Ambrosio, M.
"Robot-assisted 3D printing for rail vehicle applications", 18th Schwarzheide Plastics Colloquium, Schwarzheide, 29 September 2021Seidlitz, H.; Krenz, J., Losansky, S.
"Design and optimisation of fibre-reinforced high-pressure tanks for hydrogen storage", 18th Schwarzheide Plastics Colloquium, Schwarzheide, 28 September 2021Seidlitz, H.; Ulke-Winter, L.
"Development of a new type of adaptive rotor blade to increase the performance of small wind turbines", International wind energy forum by Plarad as part of HUSUM Wind, Husum, 16 September 2021Seidlitz, H.; Ulke-Winter, L.; Ost, L.
Experimental and numerical investigation into the draping behaviour of woven carbon fabric. IN: Journal of Industrial Textiles, SAGE Journals, 10 October 2021, DOI: 10.1177/15280837211038850Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Yellur, M. R.; Rösch, J.; Ulke-Winter, L.
Highly Efficient Adaptive Fibre-Composite Rotor Blades. IN: Kunststoffe international 05/2021, Carl Hanser Verlag, Munich, pp. 10–12, URL: https://en.kunststoffe.de/a/article-337061Seidlitz, H.; Ulke-Winter, L.; Krenz, J.; Ost, L.; Pfizenmaier, G.
Highly Efficient Adaptive Fibre-Composite Rotor Blades. IN: Kunststoffe 06/2021, Carl Hanser Verlag, Munich, pp. 32–35, URL: https://www.kunststoffe.de/a/fachartikel/hocheffiziente-adaptive-faserverbund-rot-325976Seidlitz, H.; Ulke-Winter, L.; Krenz, J.; Ost, L.; Pfizenmaier, G.
"Simulation of the forming process for semi-finished textile products", online presentation as part of the 3rd workshop of the INTERREG VA BB-PL 2014–2020 project "Overcoming borders with key technologies", Cottbus, 27 May 2021Seidlitz, H; Yellur, M.
"SMC/BMC/DMCs and special compounds", online presentation as part of the 3rd workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 27 May 2021Seidlitz, H; Steffen, S.
"Prepregs", online lecture as part of the 3rd workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 26 May 2021Seidlitz, H; Steffen, S.
"Introduction to Fibre-Reinforced Plastics", online lecture as part of the 3rd workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming Borders with Key Technologies", Cottbus, 26 May 2021Seidlitz, H; Köhler, M.
Substitution of metallic shear panels in vehicle construction through the integration of FRP shells using joining techniques. Report on the 3rd meeting of the project steering committee for project IGF No. 20649 BR, DVS No. 11.3195, 20 May 2021, Cottbus, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"A layer-by-layer introduction to additive manufacturing", online presentation as part of the 2nd workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 21 April 2021Seidlitz, H.; Wickmann, R.
Substitution of metal shear panels in vehicle construction through the integration of FKV shells using joining technology. Progress report on project IGF No. 20649 BR, DVS No. 11.3195, meeting of Technical Committee FA 11 – Plastic Joining of the Research Association for Welding and Related Processes e. V. of the DVS – German Association for Welding and Related Processes e. V., 20 April 2021, onlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
"Automation of manufacturing processes for composite materials (Automatyzacja procesów wytwarzania elementów kompozytowych)", Online conference for the composites industry: Click Watch Talk, Poland, 25 March 2021 Presentation on YouTube: https://www.youtube.com/watch?v=PMtf3kaxLOgSeidlitz, H.; Kretschmann, M.
"Composite-Metal Hybrid Materials", online conference for the composites industry: Click Watch Talk, Poland, 24 March 2021 Presentation on YouTube: https://www.youtube.com/watch?v=cE4KHMZnqnYSeidlitz, H.; Kretschmann, M.
"Technical Fibres for Composites – Glass, Aramid and Carbon Fibres…", INTERREG VA BB-PL 2014-2020 Workshop: Overcoming Borders with Key Technologies, Cottbus, 5 March 2021Seidlitz, H.; Ulke-Winter, L.
"Lightweight construction as a key technology for Lusatia", online presentation as part of the 1st workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 4 March 2021Seidlitz, H.; Ulke-Winter, L.
"Lightweight construction modelled on nature", online lecture as part of the 1st workshop of the INTERREG VA BB-PL 2014-2020 project "Overcoming borders with key technologies", Cottbus, 4 and 5 March 2021Seidlitz, H.; Ulke-Winter, L.
Recycling of Carbon Fibre Reinforced Composite Polymers — Part 1: Volume of Production, Recycling Technologies, Legislative Aspects. In: Polymers Special Issue Polymer Recycling: Degradation, Processing, Applications, 19 January 2021, DOI: 10.3390/polym13020300Seidlitz, H.; Błędzki, A.; Krenz, J.; Gorący, K.; Urbaniak, M.; Rösch, J.

 

TitleAuthor
A Simple Dye Test for Mineral Powders. In: cfi/Ber. DKG 97 (2020) No. 5-6, pp. 25-29Vieth, S.
Recycling of Carbon Fibre Reinforced Composite Polymers – Part 2. Examples of recovery and application of recycled carbon fibres. In: Polymers Special Issue Polymer Recycling: Degradation, Processing, Applications, 16 December 2020, DOI: 10.3390/polym12123003Seidlitz, H.; Błędzki, A.; Krenz, J.; Gorący, K.; Urbaniak, M.; Rösch, J.
Replacement of metal shear panels in vehicle construction through the integration of FKV shells using joining techniques. Report on the 2nd meeting of the project steering committee for project IGF No. 20649 BR, DVS No. 11.3195, 25 November 2020, Cottbus, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
Substitution of metallic shear panels in vehicle construction through the integration of FKV shells using joining technology. Progress report on project IGF No. 20649 BR, DVS No. 11.3195, meeting of Technical Committee FA 11 – Plastic Joining of the Research Association for Welding and Related Processes e. V. of the DVS – German Association for Welding and Related Processes e. V., 5 November 2020, OnlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
Substitution of metallic shear panels in vehicle construction through the joining-based integration of FKV shells. Report on the 1st meeting of the project monitoring committee for project IGF No. 20649 BR, DVS No. 11.3195, 16 June 2020, Cottbus, onlineHolger Seidlitz, Marcello Ambrosio, Lucas Ost, Vesselin Michailov, Nikolay Doynov, Oleg Shapovalov
Analysis of the draping behaviour of embroidered fabrics and the effect on the filling process. In: Advanced Composite Materials (Under Review)Seidlitz, H.; Rösch, J.; Kleinwort, J.; Santhanakrishnan Balakrishnan, V.
Analysis of the impact and damage behaviour of glass/polyamide-6 composite laminates. In: Polimery (Under Review)Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Ambrosio, M.; Kuke, F.; Ulke-Winter, L.
Preform joints in embroidered fabrics – influence on the mechanical properties. In: Advanced Composite Materials, 16 March 2020, DOI: 10.1080/09243046.2020.1744345Seidlitz, H.; Rösch, J.; Pfeifer, R.; Burlefinger, H.; Maurer, T.
Fabrication and thermal performance analysis of lightweight CFRP laminates. In: International Journal of Heat and Mass Transfer (Under Review)Seidlitz, H.; Kuke, F.; Knorr, R.; Ulke-Winter, L.; Santhanakrishnan Balakrishnan, V.

 

TitleAuthor
Impact and damage behaviour of FRP-metal hybrid laminates made by reinforcing glass fibres on a 22MnB5 metal surface. In: Composites Science and Technology, Vol. 187, 10 December 2019, DOI: 10.1016/j.compscitech.2019.107949Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Bambach, M.; Hart-Rawung, T.; Buhl, J.
"Function-integrated lightweight construction methods using variable axial prepreg lay-up technologies", VDI BB Workshop: Automated Manufacturing Technologies for Composites, Cottbus, 12 June 2019Seidlitz, H.; Zschieck, M.
"Potential and applications of Automated Fibre Placement (AFP) manufacturing technology", VDI BB Workshop: Automated Manufacturing Technologies for Composites, Cottbus, 12 June 2019Seidlitz, H.; Ambrosio, M.
A low velocity impact study on press-formed thermoplastic honeycomb sandwich panels. IN: Composite Structures, Vol. 225, 1 October 2019, DOI: 10.1016/j.compstruct.2019.111061Seidlitz, H.; Yellur, M. R.; Kuke, F.; Wartig, K.; Tsombanis, N.
Influence of metal surface preparation on the flexural strength and impact damage behaviour of thermoplastic FRP-reinforced metal laminate made by press forming. In: Composites Part B: Engineering, Vol. 173, 15 September 2019, DOI: 10.1016/j.compositesb.2019.05.094Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Kuke, F.; Obrosov, A.; Weiß, S.
The influence of stepped single-cut preform overlaps on the RTM process. In: Proceedings of the 9th Landshut Lightweight Construction Colloquium, LC-Verlag, Landshut, 27–28 February 2019, pp. 142–150, ISBN 978-3-9818439-2-7Seidlitz, H.; Rösch, J.; Pfeifer, R.
"Key technology: polymer-based lightweight construction – from monomer to high-performance component", VDI BB – Workshop: Structural change in Lusatia, Cottbus, 29 January 2019Seidlitz, H.
"Designs of tailored materials and processes", Bydgoszcz, Poland, 10 January 2019Seidlitz, H.

 

TitleAuthor
"Energy efficiency potential in companies through lightweight construction", Energy efficiency for companies – opportunities and funding options, Cottbus, 4 December 2018Seidlitz, H.
"Lightweight construction technologies for highly efficient heat transfer systems", Energy efficiency for businesses – opportunities and funding options, Cottbus, 4 December 2018Seidlitz, H.; Knorr, R.; Kuke, F.
"Function-integrated lightweight construction methods using fibre-reinforced plastics", Function Integration in Plastics, Potsdam-Golm, 21 November 2018Seidlitz, H.
"Recycling strategies for fibre-reinforced composite rotor blades", CIO: Recycling of Wind Turbines – Innovations for New Technologies, Magdeburg, 19 November 2018Seidlitz, H.; Wolf, M.; Krenz, J.
Influence of processing parameters on the impact behaviour of glass/polyamide-6 composite. In: Composites Part B: Engineering, Vol. 159, 15 February 2019, pp. 292–299, DOI: 10.1016/j.compositesb.2018.09.064Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Wartig, K.; Tsombanis, N.
A study on the influence of drilling and CO₂ laser cutting in carbon/epoxy laminates. In: Journal of Materials Research and Technology, 16 August 2018, DOI: 10.1016/j.jmrt.2018.05.025Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Vogt, N.; Yellur M.
"Optimisation of metal construction methods through the use of fibre-reinforced plastic composites (FRP)", 10th International Conference "Research Laboratories, Quality Systems in the European Union", Lubniewice, Poland, 15 June 2018Seidlitz, H.
"Damage analysis of fibre-reinforced plastic composites using Compression after Impact (CAI)", German-Polish Knowledge Forum, Cottbus, 14 June 2018Seidlitz, H.; Wartig, K.
"Novel joining technology for fibre-friendly joining of highly stressed fibre-reinforced polymer composites and metal structures", German-Polish Knowledge Forum, Cottbus, 14 June 2018Seidlitz, H.; Tsombanis, N.
"Formative welding – Current developments in the additive manufacturing of metallic components", German-Polish Knowledge Forum, Cottbus, 14 June 2018Seidlitz, H.; Ossenbrink, R.
"Development and Characterisation of Additively Manufactured Components for Lightweight Structures", German-Polish Knowledge Forum, Cottbus, 14 June 2018Seidlitz, H.; Fritzsche, S.
"Opportunities and risks of additive manufacturing processes", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Wolf, M.
"Additive manufacturing of complex components using arc welding", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Kloshek, A.
"Coupled process and structural simulation for the realistic design of a structured door impact beam", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Tsombanis, N.
"Load-optimised design of component joints for structured multi-material systems", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Fritzsche, S.
"Testing and characterisation of novel hybrid joining systems", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Vogt, N.
"Process simulation of SLM-manufactured joints / integration techniques for hybrid multilayer composites", 16th Cottbus Lightweight Construction Workshop, Cottbus, 17 May 2018Seidlitz, H.; Krenz, J.; Genchev, G.
"Lightweight construction at the interface between metals and fibre composites", 6th Potsdam Science Day, Potsdam-Golm, 5 May 2018Seidlitz, H.; Tsombanis, N.
"Lightweight Construction in Brandenburg", 3rd International Colloquium Gliwice – Cottbus, Gliwice, Poland, 26–28 March 2018Seidlitz, H.
"Flexible infusion process for the rehabilitation of underground structures", 3rd International Colloquium Gliwice – Cottbus, Gliwice, Poland, 26–28 March 2018Seidlitz, H.; Ambrosio, M.
"Design and development of fibre-reinforced composite components using the example of a track cycling crank", 3rd International Colloquium Gliwice – Cottbus, Gliwice, Poland, 26–28 March 2018Seidlitz, H.; Vogt, N.
"Effects of impact damage on fibre-reinforced plastics", 3rd International Colloquium Gliwice – Cottbus, Gliwice, Poland, 26–28 March 2018Seidlitz, H.; Santhanakrishnan Balakrishnan, V.
Layup configuration effect on notch residual strength in composite laminates. In: Materials, Vol. 11, Issue 2 (February 2018), article number 308, DOI: 10.3390/ma11020308Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Weiß, S.
Potential repair techniques for automotive composites: A review. In: Composites Part B: Engineering, Vol. 145, 2018, pp. 28–38, DOI: 10.1016/j.compositesb.2018.03.016Seidlitz, H.; Santhanakrishnan Balakrishnan, V.
TitleAuthor
Design of composites, German-Polish Innovation Network for the sustainable economic and technological strengthening of the Spree-Neiße-Bober border region, Cottbus, 14 December 2017Seidlitz, H.; Vogt, N.; Rademacher, B.
Advanced joining technology for the production of highly stressable lightweight structures, with fibre-reinforced plastics and metal, German-Polish Innovation Network for the sustainable economic and technological strengthening of the Spree-Neiße-Bober border region, Cottbus, 14 December 2017Seidlitz, H.; Tsombanis, N.; Ossenbrink, R.
Recycling strategies for fibre composite components, German-Polish Innovation Network for the sustainable economic and technological strengthening of the Spree-Neiße-Bober border region, Cottbus, 14 December 2017Seidlitz, H.; Krenz, J.; Dietz, E.
Hybrid construction methods and processes for practical application, 15th Cottbus Lightweight Construction Workshop, Cottbus, 25 October 2017Seidlitz, H.
Hybrid construction methods in large-scale automotive production, 15th Cottbus Lightweight Construction Workshop, Cottbus, 25 October 2017Seidlitz, H.; Rösch, J.
Hybrid lightweight construction methods using plastics and metals, 16th Schwarzheide Plastics Colloquium, Schwarzheide, 27 September 2017Seidlitz, H.
Advanced joining technology for the production of highly stressable lightweight structures, with fibre-reinforced plastics and metal, 3rd International MERGE Technologies Conference, Cluster of Excellence, Chemnitz, 20 September 2017 Seidlitz, H.; Tsombanis, N.
Advanced joining technology for the production of highly stressable lightweight structures, using fibre-reinforced plastics and metal. In: Technologies for Lightweight Structures, Vol. 1, Issue 2 (2017), pp. 54–67, DOI: 10.21935/tls.v1i2.76Seidlitz, H; Kuke, F.; Tsombanis, N.
Study on the quality of quasi-isotropic composite laminates containing a circular hole, Journal of Materials Science Research, 20 September 2017, DOI: 10.5539/jmsr.v6n4p67Seidlitz, H.; Santhanakrishnan Balakrishnan, V.; Ambrosio, M.; Schumann, T.
Advanced welding technology for highly stressable multi-material designs with fibre-reinforced plastics and metals, Open Journal of Composite Materials (OJCM), 21 July 2017, DOI: 10.4236/ojcm.2017.73010Seidlitz, H.;
Fritzsche, S.; Kloshek, A.; Ambrosio, M.
Recycling of rotor blades. Cluster Expert Group on Renewable Energies/Wind Energy – Repair methods and recycling of rotor blades. Wildau, 14 June 2017Seidlitz, H.; Wolf, M.; Krenz, J.
Development of highly efficient heat transfer finned plates made of CFRP for plate heat exchanger systems, CLEANTECH Initiative East Germany – Innovation Conference, Schwarze Pumpe, 3 April 2017Seidlitz, H.; Knorr, R.
Integrated Sandwich Moulding Technology (ISMT), CLEANTECH Initiative East Germany – Innovation Conference, Schwarze Pumpe, 3 April 2017Seidlitz, H.; Vogt, N.
Development of a mobile technology for the safe on-site shredding of wind turbine rotor blades, CLEANTECH Initiative East Germany – Innovation Conference, Schwarze Pumpe, 3 April 2017Seidlitz, H.; Krenz, J.
Innovative renovation method for concrete pump shafts subject to severe media stress, Lausitz Economic Initiative e.V., Lausitz Knowledge Transfer Award 2017, Cottbus, 27 March 2017Müller, M.; Hansen, T.; Ambrosio, M.
Planning and innovation management in the InnoProfile Transfer project ‘Lightweight Design with Structured Materials’. Workshop on lightweight construction research for structural change and technology transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Wolf, M.
Testing and characterisation in the InnoProfile Transfer project ‘Lightweight Design with Structured Materials’. Workshop on lightweight construction research for structural change and technology transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Schulze, M.
Additive manufacturing in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. Workshop on Lightweight Construction Research for Structural Change and Technology Transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Kloshek, A.
Design, specification and manufacturing in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. Workshop on lightweight construction research for structural change and technology transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Fritzsche, S.
CAD and forming simulation in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. Workshop on Lightweight Construction Research for Structural Change and Technology Transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Elze, L.
Modular lightweight equipment container system, Workshop on lightweight construction research for structural change and technology transfer in Lusatia, Cottbus, 27 March 2017Seidlitz, H.; Krenz, J.
Energy-efficient lightweight construction systems for practical application, VDMA exchange of experience, Industry 4.0 at the interface between research and industry, Cottbus, 22 March 2017Seidlitz, H.
Holistic lightweight construction solutions with multi-material systems comprising fibre-reinforced plastics and metals, VDI Plastics Technology Working Group, Berlin, 23 February 2017Seidlitz, H.
Innovation in Lightweight Construction, Born to be Alumni BTU Cottbus, Cottbus, 13 January 2017Seidlitz, H.
TitleAuthor
Lightweight Construction Technologies and Hybrid Construction Methods Using Fibre-Reinforced Plastics, Innovation Forum of the West Lusatia Regional Growth Centre, Cottbus, 1 December 2016Seidlitz, H.; Kuke, F.; Tsombanis, N.
High load-bearing multi-material joints of metal sheets and composites by incremental in-situ forming processes, 19th International ESAFORM Conference on Material Forming, 27–29 April 2016, Nantes, France, AIP Conference Proceedings, DOI: 10.1063/1.4963464Seidlitz, H.; Bambach, M.; Fritzsche, S.; Gerstenberger, C.
High-performance lightweight construction systems for practical application, General Meeting of the KuVBB e.V., Forst, 24 May 2016Seidlitz, H.
Innovative renovation method for concrete pump shafts subjected to severe media stress, Plastics and Chemistry Cluster Conference 2016, Potsdam-Golm, 21 November 2016Seidlitz, H.; Hansen, T.; Ambrosio, M.
Reliability capability assessment of cooperative networks using the example of developing demonstrators of structured materials. In: Proceedings of ESREL 2016, Glasgow (United Kingdom), pp. 1323–1329. Taylor & Francis Group, London, 2016, doi: 10.1201/9781315374987-198 Seidlitz, H.; Haase, F. V.; Reinhold, M.; Woll, R.; Wolf, M.
Department of Lightweight Design with Structured Materials, International Colloquium Gliwice – Cottbus, Silesian University of Technology, Gliwice, Poland, 6 October 2016Seidlitz, H.
Improvement of the tribological properties of FRP with TiAlN hard coatings, International Colloquium Gliwice – Cottbus, Silesian University of Technology, Gliwice (Poland), 6 October 2016Seidlitz, H.; Schulze, M.
Permeability as a design parameter for infusion and injection processes, International Colloquium Gliwice – Cottbus, Silesian University of Technology, Gliwice, Poland, 6 October 2016Seidlitz, H.; Ambrosio, M.
Fibre-optimised joining of fibre-reinforced plastics and metals, International Colloquium Gliwice – Cottbus, Silesian University of Technology, Gliwice, Poland, 6 October 2016Seidlitz, H.; Tsombanis, N.
High-load-bearing connection nodes with structured materials in multi-material construction. Polish-German Forum on Materials Testing. Kliczków, Poland. 9–11 June 2016Seidlitz, H.; Kloshek, A.; Fritzsche, S.; Schumann, T.
Testing and characterisation in the InnoProfile Transfer project ‘Lightweight Design with Structured Materials’. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.; Schulze, M.
Additive manufacturing in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.; Kloshek, A.
Design, specification and manufacturing in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.; Fritzsche, S.
CAD and forming simulation in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.; Elze, L.
Planning and Innovation Management in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.; Wolf, M.; Haase, F. V.
Lightweight Design with Structured Materials. 14th Cottbus Lightweight Construction Workshop. Cottbus: 31 May – 1 June 2016.Seidlitz, H.
Weight-reduced multi-material construction methods using organic sheets. 15th Chemnitz Textile Technology Conference, 31 May – 1 June 2016, Chemnitz.Seidlitz, H.; Schleuß, L.; Fritzsche, S.; Schulze, M.; Michailov, V.; Schuhmann, T.
High load-bearing multi-material joints for metal sheets and composites by incremental in-situ forming processes. 19th ESAFORM Conference 27 April – 29 April 2016, Nantes, France, AIP Conference Proceedings, doi: 10.1063/1.4963456Seidlitz, H.; Bambach, M.; Fritzsche, S.; Gerstenberger, C.
Comparison of Manufacturing of Lightweight Corrugated Sheet Sandwiches by Hydroforming and Incremental Sheet Forming. 19th ESAFORM Conference 27–29 April 2016, Nantes, France, AIP Conference Proceedings, doi: 10.1063/1.4963456 Seidlitz, H.; Maqbool, F.; Elze, L.; Bambach, M.
Application-oriented simulation of thermal straightening. 16th Conference on Welding in Maritime Technology and Civil Engineering, 20–21 April 2016Kuke, F.; Doynov, N.; Michailov, V.
High-strength sandwich structures in rail vehicle construction and sports equipment engineering. 5th Wildau Duromer Conference, Wildau, 2 March 2016Seidlitz, H.; Fritzsche, S.
Weight-reduced multi-material construction methods using organic sheets. 17th Wood Technology Colloquium. Dresden. 28–29 March 2016. ISBN: 978-3-86780-476-9Seidlitz, H.; Fritzsche, S.; Schulze, M.; Schumann, T.
Processing and characterisation of cathodic dip-coated metal/composite laminates. Archives of Civil and Mechanical Engineering, Vol. 16, Iss. 3 (2016) pp. 467–472, DOI: 10.1016/j.acme.2016.03.001.Seidlitz, H.; Gerstenberger, C.; Osiecki, T.; Kroll, L.; Scholz, P.
Tribological Investigations of PVD-Coated Multi-Layer Constructions. Journal of Materials Science Research. Volume 5, No. 1 (2016), pp. 97–106, DOI: 10.5539/jmsr.v5n1p97, ISSN: 1927-0585 (print), 1927-0593 (online).Seidlitz, H.; Schulze, M.; König, F.; Weiß, S.
TitleAuthor
Nanoindentation measurements of PVD-coated multilayer structures. 22nd Winter International Scientific Conference on Achievements in Mechanical and Materials Engineering (AMME'15). Gliwice – Zakopane, Poland. 6–9 December 2015. ISBN: 978-83-63553-39-5 (conference proceedings)Seidlitz, H.; Schulze, M.; König, F.; Weiß, S.
Nanoindentation measurements of PVD-coated multilayer structures. Journal of Achievements in Materials and Manufacturing Engineering. Vol. 72, No. 2 (2015) pp. 53–60, ISSN: 1734-8412Seidlitz, H.; Schulze, M.; König, F.; Weiß, S.
Affordable lightweight construction through multi-material systems with fibre composites and metals. Workshop on lightweight construction potential in the commercial vehicle sector. Ludwigsfelde: 5 November 2015.Seidlitz, H.; Schulze, M.; Elze, L.
Structural reinforced FRP sandwich constructions for lightweight floor panels. 11th International Scientific-Technical Conference on Advances in Plastics Technology (APT'15). Sosnowiec, Poland: 13–15 October 2015, ISBN: 978-83-63555-47-4.Seidlitz, H.; Fritzsche, S.; Winkelmann, K.; Michailov, V.
Highly wear-resistant PVD coatings for CFRP-based multi-layer construction. 11th International Scientific-Technical Conference on Advances in Plastics Technology (APT'15). Sosnowiec, Poland: 13–15 October 2015, ISBN: 978-83-63555-47-4.Seidlitz, H.; Schulze, M.; König, F.; Weiß, S.
Analytical-numerical calculation method for distortion simulation during thermal straightening of welded structures. Proc. ESI DACH Forum, 7–8 Oct. 2015Kuke, F.; Doynov, N.; Michailov, V.
Resource-efficient lightweight structural design in practice. Metaldialog Ostbrandenburg – Metal meets lightweight construction. Eisenhüttenstadt: 11 September 2015.Seidlitz, H.; Fritzsche, S.; Kloshek, A.
Manufacture of structured lightweight components. Poster. 15th Schwarzheide Plastics Colloquium. Schwarzheide: 22–23 Sept. 2015.Seidlitz, H.; Simon, S.; Elze, L.; Schulze, M.
Properties of structured lightweight components. Poster. DVS Congress / DVS Expo. Nuremberg: 14–17 September 2015.Seidlitz, H.; Elze, L.; Schulze, M.
Investigation of the influence of tubular steel electrodes on process behaviour and material transfer during MSG welding. DVS Congress 2015, DVS Reports Volume 315, ISBN 978-3-945023-46-4Kuke, F.; Kloshek, A.; Michailov, V.
Advanced Joining Technologies for Load and Fibre Adjusted FRP-Metal Hybrid Structures. Journal of Materials Science Research. Volume 4, No. 4 (2015), pp. 26–33, DOI: 10.5539/jmsr.v4n4p26, ISSN: 1927-0585 (print), 1927-0593 (online).Seidlitz, H.; Klein, M.; Podlesak, F.; Höfer, K.; Gerstenberger, C.; Mayr, P.; Kroll, L.
Construction concepts and design of force transfer zones in hybrid structures made of fibre-reinforced plastic/metal composites in vehicle construction. EFB Research Report No. 417. Hanover: European Research Association for Sheet Metal Processing (EFB) e.V., 2015. ISBN 978-3-86776-463-6.Seidlitz, H.; Kroll, L.; Nendel, W.; Gerstenberger, C.; Osiecki, T.
Hybrid sandwich composites with porous aluminium core and thermoplastic fibre-reinforced composite top layers. In: Proceedings of the 23rd Annual International Conference on Composites/Nano Engineering (ICCE23), pp. 247–248. Chengdu, China: 15 July 2015.Seidlitz, H.; Hackert, A.; Gerstenberger, C.; Osiecki, T.; Kroll, L.
Thermoplastic fibre-reinforced/metal-hybrid laminates for structural lightweight applications. In: Proceedings of the 23rd Annual International Conference on Composites/Nano Engineering (ICCE23), pp. 595–596. Chengdu, China: 14 July 2015.Seidlitz, H.; Osiecki, T.; Gerstenberger, C.; Hackert, A.; Kroll, L.
Load-adjusted fibre-reinforced polymer/metal joints in cathodic dip paint conditions. In: Proceedings of the 23rd Annual International Conference on Composites/Nano Engineering (ICCE23), pp. 227–228. Chengdu, China: 14 July 2015.Seidlitz, H.; Gerstenberger, C.; Hackert, A.; Osiecki, T.; Kroll, L.
Energy-efficient lightweight construction methods using structured materials. Brandenburg Industry Conference 2015. Cottbus: 2 July 2015.Seidlitz, H.
Analytical-numerical hybrid model for distortion simulation during thermal straightening of large structures. ANSYS Conference & 33rd CADFEM Users’ Meeting 25 June 2015, ISBN 3-937523-12-XKuke, F.; Doynov, N.; Michailov, V.
Thermal straightening simulation of welded structures. METEC & 2nd ESTAD 17 June 2015Kuke, F.; Doynov, N.; Michailov, V.
Testing and characterisation in the InnoProfile Transfer project ‘Lightweight Design with Structured Materials’. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.; Schulze, M.
Additive manufacturing in the InnoProfile transfer project ‘Lightweight Design with Structured Materials’. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.; Kloshek, A.
Design, specification and manufacturing in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.; Fritzsche, S.
CAD and forming simulation in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.; Elze, L.
Planning and Innovation Management in the InnoProfile Transfer Project ‘Lightweight Design with Structured Materials’. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.; Wolf, M.
Lightweight Design with Structured Materials. 13th Cottbus Lightweight Construction Workshop. Cottbus: 21 May 2015.Seidlitz, H.
Stress-flow-optimised joining techniques for hybrid construction methods using fibre composites and metals. 13th Cottbus Lightweight Construction Workshop. Cottbus: 20 May 2015.Seidlitz, H.
Behaviour of Cathodic Dip Paint Coated Fibre Reinforced Polymer/Metal Hybrids. International Journal of Engineering Sciences & Research Technology. Volume 4, Issue 2 (2015), pp. 146–150, ISSN 2277-9655.Seidlitz, H.; Osiecki, T.; Gerstenberger, C.; Hackert, A.; Kroll, L.
High-performance lightweight structures with fibre-reinforced thermoplastics and structured metal thin sheets. Journal of Materials Science Research. Volume 4, No. 1 (2015), pp. 28–35, DOI: 10.5539/jmsr.v4n1p28, ISSN: 1927-0585 (print), 1927-0593 (online).Seidlitz, H.; Gerstenberger, C.; Osiecki, T.; Simon, S.; Kroll, L.
Solutions for reducing CO2 emissions as an innovative driving force for lightweight vehicle construction. International Trade Fair for Tool Making Machines, Manufacturing and Automation Technology – Special Exhibition: Fibre Composite Structures on the Way to Series Production. Leipzig: 24 February 2015.Seidlitz, H.; Osiecki, T.; Hackert, A.; Gerstenberger, C.
Process chains for the production and integration of natural fibre-reinforced high-performance plastics. Z. Plastics Technology/Journal of Plastics Technology. Vol. 11 (2015), No. 1, pp. 1–24, DOI: 10.3139/O999.01012015, ISSN 1864-2217.Seidlitz, H.; Siegel, C.; Hackert, A.; Kroll, L.; Wagenführ, A.
Forming process chains for components made of fibre-reinforced plastic/metal composites. EFB Colloquium on Sheet Metal Processing – Intermezzo of Hybrid Material Solutions: Does Sheet Metal Have a Future? Bad Boll: 25 March 2015, ISBN: 978-3-86776-452-0.Seidlitz, H.; Scholz, P.; Schieck, F.; Müller, R.; Gerstenberger, C.; Osiecki, T.; Behrens, B.-A.; Vucetic, M.; Grbic, N.; Neumann, A.
TitleAuthor
Scope of application and implementation of thermomechanical forming. Workshop: New joining technologies in the automotive industry, ElV Young Researchers Group: Mass-production-ready joining techniques for multi-material systems in weight-optimised electric vehicles. Chemnitz: 27 November 2014.Seidlitz, H.; Kroll, L.; Klein, M.
Bionic-Inspired High-Stressable Joints for Multi-material Constructions with FRP and Metals. Materials Science Engineering Congress 2014 (MSE 2014). Darmstadt: 23–25 September 2014. Abstract.Seidlitz, H.; Gerstenberger, C.; Osiecki, T.; Kroll, L.
Customised Metal/Composite Hybrids for Automotive Applications. In: Proceedings of AutoMetForm/SFU 2014. New Materials for Vehicle Components. Freiberg: 3–5 November 2014, pp. 29–36, ISBN 978-3-86012-490-1Seidlitz, H.; Osiecki, T.; Gerstenberger, C.; Kroll, L.; Scholz, P.
Dimensioning of Punctiform Metal-Composite Joints: A Section-Force Related Failure Criterion. Open Journal of Composite Materials, Vol. 4, No. 3 (2014), pp. 157–172, DOI: 10.4236/ojcm.2014.43018, ISSN 2164-5612.Seidlitz, H.; Ulke-Winter, L.; Gerstenberger, C.; Kroll, L.
Heavy-Duty Hybrid Laminates for Automotive Mass Production. Materials Science Engineering Congress 2014 (MSE 2014), Darmstadt: 23–25 September 2014.Seidlitz, H.; Osiecki, T.; Gerstenberger, C.; Kroll, L.; Scholz, P.
High-strength hybrid structures using thermoplastic fibre composites and metals. Z. Joining Plastics – Joining of Plastics 8 (2014) [2], pp. 106–111. ISSN 1864-3450.Seidlitz, H.; Kroll, L.
Integrateable light sources based on semiconductor nanocrystals. In: Gessner, T. (ed.): Smart Systems Integration 2014. Aachen: Apprimus Verlag, 2014. Edition 1, pp. 451–454, ISBN 978-3-86359-201-1.Seidlitz, H.; Böttger, P.; Meyer, M.; Martin, J.; Otto, T.; Geßner, T.; Kroll, L.
Concepts for the design of point-type FKV/metal joints. Workshop: New Joining Technologies in the Automotive Industry, ElV Young Researchers Group: Mass-production-ready joining techniques for multi-material systems in weight-optimised electric vehicles. Chemnitz: 27 November 2014.Seidlitz, H.; Kroll, L.; Gerstenberger, M.; Herold, M.
Lightweight construction in global competition. Workshop: New technologies for joining metals and plastics, ELV Young Researchers Group: Mass-production-ready joining techniques for multi-material systems in weight-optimised electric vehicles. Chemnitz: 15 April 2014.Seidlitz, H.; Kroll, L.
Natural fibre-reinforced plastics for high-load composite structures. In: Lehman, K.; Simon, S.; Stein, E.: 1st Engineering Day 2014. Senftenberg: 19 November 2014. ISSN: 3-9810211-7-7.Seidlitz, H.; Gerstenberger, C.; Siegel, C.; Kroll, L.; Wagenführ, A.
New Joining Technology for Optimised Metal/Composite Assemblies. Journal of Engineering, Vol. 2014 (2014), Article ID 958501, 11 pages, doi:10.1155/2014/958501.Seidlitz, H.; Ulke-Winter, L.; Kroll, L.
Process- and strength-optimised multi-material design using thermoplastic fibre composites and metals. Z. Konstruktion: Journal of Product Development and Engineering Materials. Volume 2014, Issue 11-12/2014, pp. 75-79, ISSN: 0720-5953.Seidlitz, H.; Ulke-Winter, L.; Kroll, L.
TitleAuthor
Requirements for industrial image processing systems in the online monitoring of continuous manufacturing processes for fibre-reinforced structures. In: Gehde, M.; Wagenknecht, U.; Bloß, P.: Technomer 2013: 23rd Symposium on the Processing and Application of Polymers. Chemnitz: 2013, p. 156, ISBN 978-3-939382-11-9.Seidlitz, H.; Czech, A.; Naumann, M.; Nendel, W.; Kroll, S.
The trick: CFRP instead of steel. Technische Rundschau newspaper. The Swiss industry magazine. Vol. 105. 12 April 2013. Issue 4/2013. pp. 62–63. www.technische-rundschau.ch/dlCenter/tr/2013_4/062-063_TR0413.pdfSeidlitz, H.; Kroll, L.; Ulke-Winter, L.
Dimensioning of thermomechanically formed joints. In: Gehde, M.; Wagenknecht, U.; Bloß, P.: Technomer 2013: 23rd Symposium on the Processing and Application of Polymers. Chemnitz: 2013, P 6.4, p. 168, ISBN 978-3-939382-11-9.Seidlitz, H.; Gerstenberger, C.; Ulke-Winter, L.; Kroll, L.
Thermomechanical forming and joining for thermoplastic FRP. In: Zipsner, T. (ed.): Yearbook lightweightdesign - JOT - adhesion: Top innovations from lightweight construction, surface and adhesive technology, Berlin: Springer Vieweg, edition: 2013. ISBN-10: 3658009853, ISBN-13: 978-3658009854.Seidlitz, H.; Czech, A.; Ulke-Winter, L.; Kroll,
Towing: lightening the load. Plastics. The Global Application Medium. 2013, Vol. 3+4, p. 7. ISSN 2195-4577. www.plastics.gl/article.php Article code: KGB.Seidlitz, H.; Kroll, L.; Ulke-Winter, L.
TitleAuthor
Energy- and resource-efficient lightweight joining pliers for the manufacture of multi-component parts using mixed construction methods. Central Innovation Programme for SMEs (ZIM) – Specialist Workshop on Electromobility. Berlin: 2012.Seidlitz, H.; Nendel, W.; Kroll, L.; Ulke-Winter, L.
First CFRP coupling for rail vehicles. Z. Lightweight Design. (2012), No. 5, pp. 38–43, ISSN: 1865-4819.Seidlitz, H.; Kolshorn, K.-U.; Kroll, L.; Ulke-Winter, L.; Müller, S.; Czech, A.; Hoyer, K.-H.; Grothaus, R.
Thermomechanical Forming and Joining (TAF) – High-load-bearing joining technology for FRP/metal composite structures. 4th Innovation Day “Concepts for a successful relationship – Innovative solutions for composite joints in lightweight construction”. Chemnitz: 2012.Seidlitz, H.; Kroll, L.; Ulke-Winter, L.
Thermomechanical Forming and Joining (TAF) for high-load-bearing FRP/metal composite structures. LiMA 2012 Symposium. Chemnitz: 2012.Seidlitz, H.; Kroll, L.
TitleAuthor
Heavy-Duty Lightweight Structures: Force Flux-Maintaining Spot Connections. Z. Kunststoffe International. (2011), No. 3, pp. 25–28, ISSN 1862-4243.Seidlitz, H.; Kroll, L.; Ulke-Winter, L.
Manufacture of high-load lightweight structures using hybrid construction methods. In: Wielage, B. (ed.): Composite Materials and Material Composites. 18th Symposium on Composite Materials and Material Composites. Chemnitz: 2011. pp. 360–365. ISBN 978-3-00-033801-4.Seidlitz, H.; Kroll, L.; Ulke-Winter, L.
Stress-optimised point connections – High-load lightweight structures. Z. Kunststoffe. 101. (2011), No. 3, pp. 50–53. ISSN: 0023-5563.Seidlitz, H.; Kroll, L.; Ulke-Winter, L.
Mechanical behaviour of CFRP discs with variable-axis fibre orientation based on tailored fibre placement technology under bolt loading. In: Wielage, B. (ed.): Composite Materials and Material Composites. 18th Symposium on Composite Materials and Material Composites. Chemnitz: 2011. pp. 591–596. ISBN 978-3-00-033801-4.Seidlitz, H.; Kroll, L.; Czech, A.; Ulke-Winter, L.; Müller, S.
Thermomechanical Forming for Thermoplastic FRP. Z. Lightweight Design. (2011), No. 3, pp. 16–23. ISSN: 1865-4819.Seidlitz, H.; Czech, A.; Ulke-Winter, L.; Kroll, L.
TitleAuthor
Analytical Calculation of Laminates. 9th Science Days at Lausitz University of Applied Sciences, 1st Plastics Colloquium. Senftenberg: 2009.Seidlitz, H.; Ulke, L.; Kroll, L.
Discrete optimisation of laminate stacking sequence according to failure criteria. Methods of Artificial Intelligence. AI-Meth Series. Gliwice: 2009, pp. 57–58.Seidlitz, H.; Ulke, L.; Kroll, L.
Fibre-composite-compatible force transmission systems for high-performance components in hybrid construction. In: Gehde, M.; Wagenknecht, U.; Bloß, P.: Technomer 2009: 21st Symposium on the Processing and Application of Polymers. Chemnitz: 2009, p. 55.Seidlitz, H.; Kroll, L.; Ulke, L.
Force transmission systems in hybrid high-performance components. In: Meynerts, P. (ed.): 12th Chemnitz Textile Technology Conference. Chemnitz: TU Chemnitz, 2009, pp. 220–230.Seidlitz, H.; Kroll, L.; Ulke, L.; Schumann, T.
Force-flow-optimised joining techniques for high-performance components in composite construction. euroLITE – International Trade Fair for Lightweight Construction. Salzburg: 2009.Seidlitz, H.; Kroll, L.; Ulke, L.
Lightweight Structures – Applications and Processes. German-Polish Seminar 2009 – Lightweight Structures. Gliwice (Poland): 2009.Seidlitz, H.; Kroll, L.
Load-adjusted joining technology for composite-metal hybrids. Methods of Artificial Intelligence. AI-Meth Series. Gliwice (Poland), Silesian University of Technology: 2009, pp. 51–52., DOI: 10.5539.jmsr.v4n4p26Seidlitz, H.; Kroll, L.; Ulke, L.
Joining technology for load-bearing high-performance components in hybrid construction. 9th Science Days at Lausitz University of Applied Sciences, 1st Plastics Colloquium. Senftenberg: 2009.Seidlitz, H.; Ulke, L.; Kroll, L.
TitleAuthor
Mechanical properties of injection-moulded composite panels as a function of process parameters and reinforcing textiles. PAFATHERM 2008 Status Seminar. Chemnitz: 2008.Seidlitz, H.; Morgenstern, K.; Hoyer, K.-H.
Process optimisation for the production of fabric-reinforced components in high-temperature injection moulding tools. PAFATHERM 2008 Status Seminar. Chemnitz: 2008.Seidlitz, H.; Morgenstern, K.; Langer, D.
Fibre-reinforced lightweight construction systems. DVS Chemnitz Annual Conference 2008. Chemnitz: 2008.Seidlitz, H.; Kroll, L.
TitleAuthor
Applications of fibre-reinforced composites in high-performance applications. 11th Chemnitz Textile Technology Conference. Chemnitz: 2007.Seidlitz, H.; Kreuziger, R.
Process integration within the PAFA-THERM technology platform. PAFA-THERM 2007 status seminar. Chemnitz: 2007.Seidlitz, H.; Nendel, W.