| "Investigation of material parameters in the robot-controlled Large Scale Additive Manufacturing (LSAM) extrusion process as a function of selected process parameters" (Bachelor thesis) | Riccardo Bähr | 2025 |
| "Investigations into the development of a lithographic process for the production of structures with optimised electromagnetic properties" (Master's thesis) | Jungheon An | 2025 |
| "Development of a test facility to characterise the rock and roll rotational moulding process for the production of hydrogen liners" (Master's thesis) | Justus Friedrich | 2025 |
| "Pressure dependency of hydrogen embrittlement in an austenitic steel of the type AISI 316L" ( Master thesis) | Kautar Abdelghafour | 2024 |
| "Process Development and Draping Optimisation of CFRP Preforms using Robotic Tape Winding" ( Master's thesis) | Onur Akkol | 2024 |
| "Optimization of the adhesive concept for exterior components in special assessories" ( Master thesis) | René Klüglich | 2024 |
| "Development and application of optimization strategies for fiber reinforced composite components under consideration of failure criteria using a track cycling crank of the German national track cycling team" ( Master thesis) | Robert Kessler | 2024 |
| "Investigating Mechanical design of High-Speed Modular Twisted Pair Data Connector with Press-fit" ( Master's thesis) | Patel Mahir | 2024 |
| "Feasibility of integrated fibre optic sensors for structural health monitoring in filament wounded composite pressure vessels" (Master thesis) | Mahin Rahman | 2024 |
| "Development of a large scale additive manufactured mould based on recycled thermoplastic composite material" ( Master thesis) | Tony Rabiega | 2023 |
| "Additive manufactured moulds made of thermoplastics with intrinsic self-separating material properties for the production of thermoset fibre composite components" (Bachelor thesis) | Alexander Ruhs | 2023 |
| "Onshore wind turbine deconstruction, deassembly and recycling in Germany with an outlook to more sustainable solution approaches" ( Bachelor thesis) | Timo Hermes | 2022 |
| Entwicklung von Simulationsmodellen zur Auslegung und Gewichtsoptimierung eines Leichtbauhebesystems für den mobilen Baustelleneinsatz (Development of simulation models for structural design and weight optimisation of a mobile lightweight building crane) (Master's thesis) | Calors Saunders | 2021 |
| Study and development of simulation models of heat exchangers ( Master thesis) | Divya Teja | 2021 |
| Targeted electrical alignment of carbon short fibres in thermoset and thermoplastic matrix environments and analysis of the effect on the thermal conductivity of fibre-reinforced plastic composites (FRP) (Bachelor thesis) | Justus Friedrich | 2020 |
| Techno-economic analysis of a suitable manufacturing process for the production of plastic-metal hybrid facade elements made of polyester and aluminium (Master's thesis) | Manuel Eberhard | 2020 |
| Screening and sensitivity analysis of influencing factors on the structural behaviour of thermomechanically coupled CFRP structures (Master's thesis) | Lucas Ost | 2019 |
| Experimental investigations to determine the relationship between the surface energy change and the material behaviour of fibre-plastic composite hybrids (Bachelor thesis) | René Klüglich | 2019 |
| Development of a process chain for the realisation of resilient hollow structures in prototype construction (Bachelor thesis) | Carl Soballa | 2019 |
| Design of a bridge with functional folding structures of high-performance building materials (GRP/CFRP) (project work) | Jasmin Kirchhoff, Fenja Pagel | 2019 |
| Additive tooling in fibre composite processing (Master's thesis) | Anne Kretschmer | 2019 |
| Development and comparative investigation of heatable flexible moulding tools for the production of fibre composite plastics (Master's thesis) | Peer Heß | 2019 |
| Supervisor of the student as part of his industrial internship, in cooperation with the company Teleskop Sp. z o.o. in Kostrzyn (Poland) (internship) | Florian Muchow | 2019 |
| Supervisor of the student as part of his internship at the Institute for Research and Development of Sports Equipment (FES) (internship) | Carl Soballa | 2018 |
| Supervisor of the student as part of his industrial internship, in cooperation with the company RLE Mobility GmbH & Co KG (internship) | Xiaolong Xu | 2018 |
| Development of an insert system for bending-loaded sandwich components (Bachelor's thesis) | Reyk Jäger | 2018 |
| Production of rail support bodies made of plastics in the non-stationary area of open-cast railway systems (Master's thesis) | Jörg Tscharke | 2018 |
| Development and implementation of an additively manufactured Bugatti rear wing mechanics in FRP-metal hybrid construction using numerical calculation and optimisation methods (Master's thesis) | Anna Populoh | 2018 |
| Construction and design of a lightweight loading area in thermoplastic sandwich construction (Master's thesis) | Kevin Wartig | 2018 |
| Generation Y - Requirements for companies using the example of an engineering service provider (Master's thesis) | Katharina Kuzmin | 2018 |
| Qualification of an innovative joining technology for joining aluminium with a fibre-reinforced thermoplastic hybrid component (Master's thesis) | Toni Mietzelfeld | 2018 |
| Characterisation and development of a novel joining process for fibre-compatible joining of fibre-plastic composites and metals (Master's thesis) | Nikolas Tsombanis | 2018 |
| Development and implementation of a measuring device for the experimental determination of the one-dimensional permeability of flat textile fibre materials (Master's thesis) | Marcello Ambrosio | 2017 |
| Development of a fibre composite crankset for track racing bikes and a suitable manufacturing process (Master's thesis) | Niklas Vogt | 2017 |
| Development of a track bike handlebar in fibre composite construction for the German Olympic national team (Master's thesis) | Jonas Krenz | 2017 |
| Concept development and economic feasibility study for the pre-shredding of large-volume composite components (Master's thesis) | Sebastian Deubel | 2017 |
| Development of a pneumatic fastening system for positioning solid fibre composite preforms in pump shafts (Bachelor's thesis) | Adrian Woick | 2017 |
| Development of a customised key performance indicator system for the introduction of innovative technologies in the field of structured materials (Bachelor thesis) | Nadine Bannatz | 2017 |
| Parameter study for the production of CMT pin specimens and investigation of joint strength under static loads (Bachelor thesis) | Patrik Stenzel | 2017 |
| Characterisation and selection of media-resistant, flexible sandwich composites for the rehabilitation of concrete pump shafts using the resin infusion process (Bachelor's thesis) | Michael Wegmann | 2017 |
| Integration of punctual load introduction in highly loaded fibre composite components using laser technology (Master's thesis) | Yufeng Qi | 2017 |
| Investigations into the integration of punctual load introduction in thick-walled fibre composites (Bachelor thesis) | Pauline Cordes | 2016 |
| Construction and design of a hockey stick in fibre composite construction (Bachelor thesis) | Fabig, Nils | 2016 |
| Highly resilient mixed joints with metals and fibre-plastic composites | Serhan Öcal | 2015 |
